Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

12 Volt 7 Amp Rechargeable Battery

Showing 1 - 24 of 52 items Search Results for "12 volt 7 amp rechargeable battery"

1 2 3 of 3 next

Sort By:

BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
12061

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amps
  • Warranty: 1 Year
12 Volt - 6 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Golf caddies and scooters among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: Includes clamps, approximately 5ft cord length OUTPUT: 12 Volt Nominal; 6 Amp DC Set Voltage (cut-off Voltage): 14.3v +/- 0.1 Float Voltage (come-on Voltage):13.7 +/-0.1 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
SLA-12V7-F2-X8

Quantity
Price: 135.60
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7.6 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40 °C to +60 °C (-40 °F to +140 °F), and charged at temperatures ranging from -20 °C to +50 °C (4 °F to +122 °F). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect batteries2 packs of 4x 12 Volts 7 AmpHour bound and connectedRBC12, RBC26 equivalent1 Year Warranty100% OEM compatibleAPC Installation: (Adobe PDF)
(Learn More)
BM Part #:
022-0157-1

Quantity
Price: 88.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 2 Year
Portable or Permanent Mount lightweight waterproof, compact on board charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickled chargers. It's easy to use, fits in tight places and it's packed with power. Includes one Lug Harness Waterproof Shock & Vibration Resistant Microprocessor Circuitry, correctly charges AGM or Wet batteries. Not to be used for Gel batteries. Charges any size (capacity) lead acid battery Included is a quick connect lug harness hard to reach areas Charge/Maintain up to 4 batteries (of similar type - in parallel) Reverse Polarity Protection Temperature Compensation (Available on some models) Complete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode) Input Power: 115VAC @ 60Hz Temperature Range: -20F to 120F 6' fused output cable UL approved at 5.5 amps Replaces 022-0076-1, 022-0071-1 Clamp harness not included see related Items Below Technical Specs: (Adobe PDF)
(Learn More)
BM Part #:
SLA-12V7-F2

Quantity
Price: 16.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7.6 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. View a comparison of F1 and F2 terminals. ALARM SYSTEM NOTE: Most Alarm Systems with 12 volt, 7 Ah batteries use the F1 (3/16" wide) version. Brand New First Quality Factory Direct Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. Replaces: Please check your terminal width before ordering:RBC2, RBC17, RBC51 RBC59, equivalent replaces 12-621, BP7-12, BP7-12-T2, BP7.5-12, BP8-12, CFM12V6.5, CP685AVR, DG12-7, ES7-12, EVX1270, EVX1270F2, GP1270, GP1270F2, GP1272, GPL1272F2, GT026P4, HE12V7.7, HR9-12, HR1224WF2, J1260, J1265, LC-R127R2P, LCR12V6.5BP, LCR12V7.2P, LCV 12V-7.2BP, NP7-12, NP7-12-1, NP7-12FR, NPW36-12, PC1270, PE12V6.5, PE12V7, PE12V7.2, PS-1270, PS1270F2, PX12072F2-HG, PXL12072, Ryobi 182391, SLA1075, TPE12V7.2F2, UB1270, UB1280, UP-RW1245P1, WP6.5-12, WP7-12, WP7.2-12 (View Full List of OEM numbers and models) This battery is also a replacement for some Verizon FiOS Battery Backup Units. Please confirm the battery size and terminals of your original battery. Specifications: 12 Volt 7.2 Amp Hour (Ah) at 20HR Rate Length 5.95 in. Width 2.56 in. Height 3.71 in. F2 Terminals (1/4" wide) 1 Year Warranty APC Installation: (Adobe PDF)
(Learn More)
BM Part #:
SLA-12V7-F1

Quantity
Price: 11.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7.2 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. View a comparison of F1 and F2 terminals. Brand New First Quality Factory Direct Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. Specifications: 12 Volt 7.2 Amp Hour (Ah) at 20HR Rate Length 5.95 in. Width 2.56 in. Height 3.71 in. F1 terminals (3/16" wide) 1 Year Warranty Replaces: Please check your terminal width before ordering: Streamlight: 45630, Litebox LED Other #: 12-621, 530402815, 530401574, BP7-12, BP7.5-12, BP8-12, CFM12V6.5, CPSBK3, Cyberpower CPS900AVR AVR Series, CPS1000AVR AVR Series, CPS1100AVR AVR Series, CY0112, DG12-7, GP1270, GP1272, GT026P4, HE12V7.7, HR9-12, JC1260, JC1265, LC-R127R2P, LC-R127R2P1, LCR12V6.5BP, LCR-12V7.2P, MX 12070, NP7-12, Opti VS375C, Opti RBAT-6, PC1270, PE12V6.5, PE12V7F1, PE12V7.2F1, PS-1270, PS1270F1, PXL12072, Ryobi 182391, SH1228W, SLA1075, UB1270, UB1280, WP6.5-12, WP7-12, WP7.2-12 Other devices: RB90 Cordless Blower, Handystik Cordless Trimmer (View Full List of OEM numbers and models)
(Learn More)
BM Part #:
GEN1

Quantity
Price: 127.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Varible Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specfications Battery Banks: 1 Amps/Bank: 10 Amps Total Amps: 10 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12 VDC Efficiency: 90% Approx. Charging Volatge: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 6.0" x 5.1" x 2.5" Weight: 3.75 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
12V10-PROMO

Quantity
Price: 21.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Ah (Tests at 14.6 Ah)
  • Warranty: 1 Year
Special Purchase at a Great Value! This brand new, factory fresh battery has just arrived as part of a special order. The manufacturer has rated this battery at 10Ah. They're being modest, as our internal QC team shows that they test at an excellent 14.6 Ah! This battery is a great replacement for each of the battery numbers below. RBC4 equivalent replaces 00801-1460, 12CE12, BP12-12, CB 12-12, CB12-12, CFM12V10, DG12-12, ES12-12, FP12120, GP12110F2, GP12120, HE12V12.7, HR15-12, LCR-12V12P, LCR12V12PF, LC-R1212P, LC-RA1212P, NP12-12, PE12V12F2, Deltec PRM700, PS12100, PS12100F2, PS-12120, PX12120, TR12-12, UB12120, WP10-12, WP12-12 Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:100% OEM compatibleGuaranteed to meet or exceed OEM specificationsLength 5.95 in.Width 3.91 in.Height 3.71 in.Terminal F21 Year WarrantyAPC Installation: (Adobe PDF)
(Learn More)
BM Part #:
GEN2

NOCO 12 Volt, 20 Amp Genius 2 Bank Battery Charger - Made in the USA Free Ground Shipping!

BACKORDERED
Available April 25, 2014
Quantity
Price: 186.95
  • Voltage: 12 - 24 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (20 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 2 -- Charges up to two (2) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 20 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-24 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 7.0" x 6.0" x 2.5" Weight: 5.70 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
GEN3

Quantity
Price: 266.95
  • Voltage: 12 - 36 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (30 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 3 -- Charges up to three (3) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 30 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-36 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 11.0" x 7.3" x 2.9" Weight: 11.60 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
SLA-12V7-F2-X2

Quantity
Price: 33.90
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7.6 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect batteries2 x 12 Volts 7 AmpHour batteriesYuasa NPW45-12, APC RBC5, APC RBC9, APC RBC22, APC RBC48, RBC109, RBC123, RBC124 equivalent1 Year Warranty100% OEM compatibleAPC Installation: (Adobe PDF) Also replaces: Razor Pocket Mod Scooter's: Bistro 15130638, Bella 15130610, Betty 15130661, Daisy 15130650, Vapor Black 15130601, Vapor Silver 15130612, Hannah Montana 15130651, Sweet Pea 15130659, Little Red 15130658, Hello Kitty 15130664
(Learn More)
BM Part #:
SLA-12V18-X2

Quantity
Price: 69.90
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 18 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect batteries Existing/New fuses may need modification to fit 2 x 12 Volts 18 AmpHour batteries Dimensions for a single 12 Volt, 18 Ah Battery: Length: 7.13" Width: 2.99" Height: 6.57" RBC7 equivalent 1 Year Warranty 100% OEM compatible Replacement for Black & Decker lawn mower battery APC Installation: (Adobe PDF) Compatible with: Black & Decker Cordless Mower: 905080-11, 244509-00, 243601-00, 242606-00, 242738-01, 242738-01, 37052, CMM1000, CMM1200
(Learn More)
BM Part #:
SLA-12V12-X2

Quantity
Price: 59.90
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 12 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect batteries2 x 12 Volts 12 AmpHour batteriesRBC6 equivalent1 Year Warranty100% OEM compatibleAPC Installation: (Adobe PDF) This pack of two batteries can replace: Invacare: Lynx-4, L-4 electric scooter Other: RBC6, TD12-12
(Learn More)
BM Part #:
PL2310

Quantity
Price: 70.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 2/6/10 Amp
  • Warranty: 1 Year
Fully Automatic, Microprocessor-Controlled Operation - Simply set the charging parameters and press "CHARGE". Properly charges all battery types, including Conventional, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries. Advanced Multi-Phase Charging Process charges each battery based on its specific needs for optimal results. Optimized "Soft Start" and "Battery Recondition" routines specifically address the needs of problem batteries. Enhanced maintenance mode provides ideal long term storage charging. Temperature compensation feature adjusts to changes in ambient temperature. Reverse polarity protection and Battery Fault Detection for safe operation. Thermally activated fan control reduces noise and extends unit life. Data-rich displays provide specific status throughout the charging process. Not just smart - Intelligent INTELLIGENT New PRO-LOGIX Battery Chargers utilize an advanced multi-phase charging process to deliver the optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a 12 Volt lead-acid battery installed in a vehicle, it can be charged and charged right with PRO-LOGIX. VERSATILE New PRO-LOGIX Battery Chargers deliver two tools in one. They function as an advanced automatic battery charger (Phases 1-4) to immediately bring depleted batteries to full charge so that they can be put back into service. Plus, they function as an advanced automatic battery maintainer (Phases 5-7), conditioning and maintaining batteries in long term storage so they are in a ready state when needed. BENEFICIAL The PRO-LOGIX charging process results in improved battery condition and restored reserve capacity. Whether a battery is new and the operator simply wants to keep it in top condition as a preventive maintenance step or is older and in need of reconditioning, PRO-LOGIX will deliver a beneficial service to the battery every time.
(Learn More)
BM Part #:
SLA-12V7-F2-X10

Quantity
Price: 189.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7.6 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct SYBT5 equivalent Must use your existing hardware to connect batteries 10x 12 Volts 7.2 Ah (Amp Hour) Batteries 1 Year Warranty 100% OEM compatible APC Installation: (Adobe PDF)
(Learn More)
BM Part #:
SLA-12V0-8

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 0.8 Ah
  • Warranty: 1 Year
Brand New First Quality Factory DirectIf you are using these batteries for a UPS please verify the quantity needed by looking in the owners manual, checking inside the UPS or calling us.Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service Life A dependable service life can be expected under normal operating conditions.Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature Range May be discharged over a temperature range of -40 ºC to +60 º(-40 ºF to +140 ºF), and charged at temperatures ranging from -20 ºC to +50 ºC (4 ºF to +122 ºF). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Replaces UB1208, PS-1208, PE12V0.80.8 Amp Hours at a 20 hour rateLength 3.80 in.Width 1.00 in.Height 2.43 in.1 Year Warranty
(Learn More)
BM Part #:
SLA-12V18-X4

Quantity
Price: 139.80
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 18 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Note: Existing/New fuse leads may need to be bent slightly. Fuse is not included.Brand New First Quality Factory DirectSealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service Life A dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect UPS batteriesExisting/New fuse leads may need to be bent slightlyTwo packs of two 12 Volt 18 AmpHour batteries (total of 2 of the batteries shown in product image)RBC11 and RBC55 equivalent1 Year Warranty100% OEM compatibleAPC Installation: (Adobe PDF)
(Learn More)
BM Part #:
SLA-6V12-F2-X2

Quantity
Price: 29.90
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 12 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40 °C to +60 °C (-40 °F to +140 °F), and charged at temperatures ranging from -20 °C to +50 °C (4 °F to +122 °F). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Must use your existing hardware to connect batteries2 x 6 Volts 12 AmpHour batteriesRBC3 Equivalent1 Year Warranty100% OEM compatibleAPC Installation: (Adobe PDF)
(Learn More)
BM Part #:
60012

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7000 mAh
  • Warranty: 1 Year
Prevents overcharging 12V batteries! What is a charge controller? A charge controller is a very important feature of a solar system and must be used on all systems over 15 Watts. A charge controller protects your batteries from overcharge and discharge. Charge controllers are the maintenance free protection of your solar panel and batteries. Connecting a solar panel to a battery without a regulator seriously risks damaging the battery and potentially causing a safety concern. 7 Amp Solar Charge Controller: Maintain 12V batteries in a fully charged state Specifications Cut-in Voltage: 13 Volts Cut-Out Voltage: 14.2 Volts Max. Load: 105 Watts/ 7 Amps Product Features: Protects battery from overcharge and discharge For use with 12 Volt solar panels and batteries only Handles up to 7 amps of array current Handles up to 105 watts of solar power Maintains 12V batteries in a fully charged state Operation: Yellow charging light indicates battery charging Green light indicates fully charged battery Installation: Attach the charge controller positive(+) wire to the positive (+) battery terminal Attach the charge controller negative (-) wire to the negative (-) battery terminal Product Dimensions: (L x W x H): 4" x 2.85" x 1" Retail Box Dimensions: (L x W x H): 7 5/8" x 4 5/8" x 2 1/4" Installation Connect to Battery: Attach the Solar Charge Controller positive (+) wire to the positive (+) battery terminal. Then connect the Solar Charge Controller negative (-) wire to the negative (-) battery terminal. WARNING: The alligator clips MUST be placed on to the battery in the aforementioned order- wrong connections may cause sparking or explosion. Connect to Solar Panel: Option 1 Strip the solar panel wires. Connect positive (+) wire from the solar panel to the positive (+) of the charge controller and the negative (-) wire from the solar panel to the negative (-) of the charge controller. Ensure the connections are secure. Option 2 Some panels may include a quick connect for use with the Solar Charge Controller. If included, connect positive to positive and negative to negative of charge controller. Ensure connections are secure. Operation: The Green "Charged" light indicates a full-charged battery. When the battery reaches 14.2 V, the Solar Charge Controller will cut out voltage thereby ensuring no overcharging. The yellow "Charging" light indicates a battery that is being charged. When the battery reaches 13 V, the Battery Charge Controller will cut-in and begin charging. NOTES: The Solar Charge Controller should be placed within 5 feet of the battery in a dry well ventilated area. This Solar Charge Controller can support up to 105 watts of solar power. It is not advisable to use with greater wattage. All connections should be in parallel to ensure a 12 Volt system. It is normal for both lights to flicker on and off during normal operation. The Battery Charge Controller should be placed within 5' of the battery in a dry, well-ventilated area. This Battery Charge Controller can support up to 105 W and up to 7 A of array current. All connections should be parallel to ensure 12 V system (positive to positive and negative to negative). FAQ How many panels can I connect to my 7 Amp Solar Charge Controller? You can connect up to 105 Watts of Solar Power to the 7 Amp Solar Charge Controller. Panels should be connected in parallel - positive to positive, negative to negative. When will the Charged Indication light (green) light up? The charged indication green light will light up when the battery voltage reaches 14.2 Volts and the SCC will prevent the solar panels from overcharging the battery. It is normal for the SCC LED to light on and off as the battery voltage cuts in and out. GENERAL TESTING PROTOCOL Always test outdoors under optimal sunlight Test Solar Panel for Voltage Connect Voltmeter to the panel separately from the charge controller and observe Open Voltage. Open Voltage can range from 16 Volts to 24 Volts. Test Connection to Charge Controller for Voltage. Reconnect solar panel, and connect to charge controller as per instructions. Measure the Open Circuit Voltage at the battery side of the charge controller. Open circuit voltage should read 5-10% lower than without charge controller. Open circuit measurement will read between 15 and 23.5. Connect charge controller to battery First, disconnect solar panels and connect charge controller to battery. Always connect charge controller to battery first and remove last. Observe polarity - positive to positive and negative to negative. Reconnect Solar Panels to Charge Controller If battery voltage is 14.2 or higher, the GREEN light should be on. If battery voltage is between 13 and 14.2, the YELLOW LED should be on. If battery voltage is 13 or lower, the YELLOW LED should be on. If all testing results within the above indicated ranges, solar system is in acceptable range. If Voltage readings indicate lower ranges, repeat above connections and retest. Finally, it is common to have 12V Battery issues such as dead cells or non-rechargeable battery problems.
(Learn More)
BM Part #:
PG-12V75T-FR-X4

Quantity
Price: 735.80
  • Voltage: 12 Volt
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct RBC13 equivalent Must use your existing hardware to connect batteries 4x 12 Volts 75 AmpHour Batteries 1 Year Warranty 100% OEM compatible APC Installation: (Adobe PDF)
(Learn More)
BM Part #:
SLA-12V9-F2-X8

Quantity
Price: 204.95
  • Voltage: 12 Volt
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct RBC12 equivalent Must use your existing hardware to connect batteries 8x 12 Volts 9 AmpHour Batteries 1 Year Warranty 100% OEM compatible APC Installation: (Adobe PDF) Individual Battery Dimensions: 5.95"L x 2.56"W x 3.71"H
(Learn More)
BM Part #:
SLA-12V9-F2-X4

Quantity
Price: 102.95
  • Voltage: 12 Volt
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct RBC57, RBC115 equivalent Must use your existing hardware to connect batteries 4x 12 Volts 9 AmpHour Batteries 1 Year Warranty 100% OEM compatible APC Installation: (Adobe PDF) Individual Battery Dimensions: 5.95"L x 2.56"W x 3.71"H
(Learn More)
BM Part #:
APC-32

Quantity
Price: 66.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7 Ah
  • Warranty: 1 Year
This rechargeable RBC32 pack consists of two 12 Volt, 7 Ah batteries with the appropriate connector plug. Includes necessary plug to connect batteries 2x 12 Volts 7 AmpHour batteries RBC32 replacement 1 Year Warranty 100% OEM compatible Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.
(Learn More)
BM Part #:
ACC-SE-1510MA

Quantity
Price: 94.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 2 Amp, 15 Amp
  • Warranty: 2 Year Factory Direct
Schumacher's Automatic Charger with Engine Start is for use with 6 and 12 Volt batteries and includes 2 LED lights to signal full charge and check battery. Features 100 ampere engine start for emergency starting, 15 ampere fast charge for charging a battery in 2 to 4 hours, and 2 ampere trickle charge for charging a small 12 Volt battery in 2 to 12 hours. This charger is fully automatic and will not overcharge batteries. #specs-table table { float: left; margin-right: 20px; width: 360px; } table.long tbody tr td { padding: 6px; vertical-align: middle; } table.long tbody td { border-bottom: 1px solid #EBE7DE; } .col3 { width: 231px; } .col5 { width: 120px; } Item#1677822 Ship Weight16.0 lbs Charger TypeAutomatic Volts6, 12 Works With6, 12V batteries Settings (qty.)4 Amp Charge Rate100, 15, 2 Recharge Time (hours at amps)2–4 at 15 Trickle Recharge Time (hours at amps)2–12 at 2 Amps100/15/2 Cable Length (in.)72 Cable Gauge10 Clamp MaterialPlated steel Overcharge ProtectionYes Charges Multiple Batteries (qty.)2 Polarity Reversal ProtectionYes Case MaterialSteel Power Cord (ft.)6 Dimensions L x W x H (in.)9 x 10 x 4 1/2
(Learn More)
1 2 3 of 3 next
SearchSpring