Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

12 Volt Rv Batteries

Showing 1 - 24 of 100 items Search Results for "12 volt rv batteries"

1 2 3 of 5 next

Sort By:

BM Part #:
12N5-5-3B

Quantity
Price: 25.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 55 CCA
  • Capacity (Amp Hours): 5.5 Ah
  • Warranty: 6 Months
12 Volts 5.5 Amp Hour @10 hr rate 0.6 Ah Charge Current 55 CCA Ships without acid which can be purchased at most large auto parts stores New bolts included Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.Off-Season Maintenance:We recommend the below charger to maintain this battery when it is not in use.
(Learn More)
BM Part #:
BM-MB5.5U

Motobatt MB5.5U 12V 7Ah AGM Battery Free Ground Shipping!
Quantity
Price: 66.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 90 CCA
  • Capacity (Amp Hours): 7 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 7 Ah / 90 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
BM-MB9U

Motobatt MB9U 12V 11Ah AGM Battery Free Ground Shipping!
Quantity
Price: 67.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 140 CCA
  • Capacity (Amp Hours): 11 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 11 Ah / 140 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
YB9-B

Quantity
Price: 32.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 130 CCA
  • Capacity (Amp Hours): 9 Ah
  • Warranty: 6 Months
12 Volts9 Amp Hour @10 hr rate0.9 Ah Charge Current130 CCAShips without acid which can be purchased at most large auto parts storesNew bolts includedReplaces: 7812, 41542, 42511, 43016, 44356, 50914, 71132, 2056540, 2071980, 01-107, 01-167, 12N9-4B-1, 509014008A514, 740-1858, 740-1869, 9-B, 94B1, 12N9-4B-1, CB9-B, CB9-BFP, ES12N94B1, FB9-B, GM9Z-4B, M2290B, M229BY, M3290B, M329BY, PUZ5A, UB9-B, UTX9A-BS, YB9-BNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.Off-Season Maintenance:We recommend the below charger to maintain this battery when it is not in use.
(Learn More)
BM Part #:
AGM-YB9B

YB9-B AGM Maintenance Free Battery Free Ground Shipping!
Quantity
Price: 51.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 120 CCA
  • Capacity (Amp Hours): 8 Ah
  • Warranty: 1 Year
12 Volt 8 Ah 120 CCA Replaces: 7812, 41542, 42511, 43016, 44356, 50914, 71132, 2056540, 2071980, 01-107, 01-167, 12N9-4B-1, 509014008A514, 740-1858, 740-1869, 9-B, 94B1, CB9-B, CB9-BFP, ES12N94B1, FB9-B, GM9Z-4B, M2290B, M229BY, M3290B, M329BY, PUZ5A, UB9-B, UTX9A-BS, YB9-B
(Learn More)
BM Part #:
SLA-12V100

Quantity
Price: 185.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 92 Ah
  • Warranty: 1 Year
Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.General SpecificationsDimensions:Length12.00 inches305 millimetersWidth6.60 inches168 millimetersHeight8.15 inches207 millimetersHeight over Terminals8.98 inches228 millimetersApproximate Weight68.7 pounds31.2 kilogramsTerminals:"G" - Offset post with horizontal hole, stainless steel 5/16" bolt and hex nutCase:ABS PlasticElectrical SpecificationsNominal Voltage:12 Volts (6 cell in series)Nominal Capacity:20 hour rate(5A to 10.50 volts)92.0 AH10 hour rate(9.2A to 10.50 volts)92.0 AH5 hour rate(15.8A to 10.20 volts)79.0 AH1 hour rate(55.2A to 9.00 volts)55.2 AHEnergy Density (20 hour rate)1.85 Watt-hours/cubic inch112.8 Watt-hours/lSpecific Energy (20 hour rate)17.5 Watt-hours/pound38.5 Watt-hours/kgInternal Resistance (Fully Charged Battery)3.4 milliohms (approx.) Made in the USA
(Learn More)
BM Part #:
SLA-8A-4D

Quantity
Price: 379.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 198 Ah
  • Warranty: 1 Year
Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Length 20 3/4 in.Width 8 1/2 in.Height 10 in.Weight 129 LBS (not including shipping materials)Ships motor freight only1 Year WarrantyMade in the USA
(Learn More)
BM Part #:
SLA-8A-8D

Quantity
Price: 459.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 245 Ah
  • Warranty: 1 Year
Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Length 20 3/4 in.Width 11 in.Height 10 7/8 in.Ships motor freight only1 Year WarrantyMade in the USA
(Learn More)
BM Part #:
800301-001

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Watts
  • Warranty: 1 Year
Helps trickle charge 12 volt batteries For auto, marine, and RV batteries Plugs into 12 volt DC plug or directly into battery Weatherproof Package Includes: 1' Cigarette Plug 1' Clamps 4 Screw
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
ACC-SC-10030A

Quantity
Price: 113.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 12 / 30 Amp
  • Warranty: 2 Year Factory Direct
Fully Automatic Microprocessor Controlled 100 Amp Engine Start - for emergency starting. 1230 Amp Fast Charge - self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition. Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries. 2 Amp Slow Charge - for charging and maintaining small batteries; charges motorcycle, ATV, snowmobile and lawn tractor batteries. 125 Amp, Sure-Grip Clamps - for top and side-mounted battery posts. Electronic Touch-Pad Controls - easy-to-select switches for Digital Display, Battery Type or Charge/Start. Choose from 12V regular automotive, 12V deep-cycle, 12V AGM or gel cell and 6V regular batteries. Built-in Digital Voltmeter/Tester - helps diagnose problems. Retractable Handle - for easy portability. Cord wrap on back.
(Learn More)
BM Part #:
800302-001

Quantity
Price: 111.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15 Watt
  • Warranty: 1 Year
Note: The charge regulator is sold separately. This prevents overcharging and prevents reverse polarity issues. 15 watt 12V Battery Charger Helps trickle charge 12 volt batteries For auto, marine, and RV batteries Plugs into 12 volt DC plug or directly into battery Weatherproof Package includes: 1' Cigarette Plug 1' Clamps 1' bare wire leads Product Specifications 38" x 13 3/4" 12V cigarette & battery clips Charge control recommended Multiple panels can be connected
(Learn More)
BM Part #:
ACC-RS-2

Quantity
Price: 136.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12 Amps
  • Warranty: 2 Year Factory Direct
The Dual Pro 6 Amp Waterproof Battery Charger is an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers. Battery Charging Systems Designed for Everyday Applications Affordable, Reliable, and Safe. Trouble free - Just plug it in and forget it! Be one of the many 750,000 satisfied customers! Wide variety of applications. Universal input, 110-220VAC. May be used in many types of every applications including: Bass boats, runabouts, pontoons, other types of watercraft, automobiles, ATVs, golf carts, and more. Features Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries Designed for use in fresh and salt water Dependable, rugged construction and waterproof Independent outputs and fully automatic Battery maintenance mode Two year warranty DC charge cables = 5ft and AC power cord = 3ft Approved and meets ISO 8846 Marine standards Models available to charge 12-36V systems LED lights indicate "Each Battery's" state of charge Reverse polarity protected and no installation restrictions Float stage maintenance and independent outputs Ignition protected (US Coast Guard 33 CFR 183.410) FCC 15 Parts A and B Interference Compliant
(Learn More)
BM Part #:
SLA-12V55

Quantity
Price: 144.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 55 Ah
  • Warranty: 1 Year
Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:Length 9 3/8 in.Width 5 1/2 in.Height 9 1/4 in.Terminal Insert1 Year WarrantyMade in the USA
(Learn More)
BM Part #:
022-0157-1

Quantity
Price: 88.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 2 Year
Portable or Permanent Mount lightweight waterproof, compact on board charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickled chargers. It's easy to use, fits in tight places and it's packed with power. Includes one Lug Harness Waterproof Shock & Vibration Resistant Microprocessor Circuitry, correctly charges AGM or Wet batteries. Not to be used for Gel batteries. Charges any size (capacity) lead acid battery Included is a quick connect lug harness hard to reach areas Charge/Maintain up to 4 batteries (of similar type - in parallel) Reverse Polarity Protection Temperature Compensation (Available on some models) Complete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode) Input Power: 115VAC @ 60Hz Temperature Range: -20F to 120F 6' fused output cable UL approved at 5.5 amps Replaces 022-0076-1, 022-0071-1 Clamp harness not included see related Items Below Technical Specs: (Adobe PDF)
(Learn More)
BM Part #:
SLA-12V75

Quantity
Price: 157.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 75 Ah
  • Warranty: 1 Year
Brand New First Quality Factory Direct Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. Terminal Configuration Click to Enlarge Specifications: Length 10 7/8 in.Width 6 3/4 in.Height 9 7/8 in.Terminal BO1 Year Warranty
(Learn More)
BM Part #:
GEN1

Quantity
Price: 127.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Varible Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specfications Battery Banks: 1 Amps/Bank: 10 Amps Total Amps: 10 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12 VDC Efficiency: 90% Approx. Charging Volatge: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 6.0" x 5.1" x 2.5" Weight: 3.75 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
ACC-SS-3

Quantity
Price: 306.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-3

Dual Pro Three Bank Pro 12 Volt 45 Amp Battery Charger - Three 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 386.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 45 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
GEN2

NOCO 12 Volt, 20 Amp Genius 2 Bank Battery Charger - Made in the USA Free Ground Shipping!

BACKORDERED
Available May 16, 2014
Quantity
Price: 186.95
  • Voltage: 12 - 24 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (20 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 2 -- Charges up to two (2) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 20 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-24 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 7.0" x 6.0" x 2.5" Weight: 5.70 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
ACC-PS-2

Dual Pro 12 Volt 30 Amp Battery Charger - Two 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 287.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-2

Quantity
Price: 243.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 20 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
GEN3

Quantity
Price: 266.95
  • Voltage: 12 - 36 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (30 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 3 -- Charges up to three (3) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 30 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-36 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 11.0" x 7.3" x 2.9" Weight: 11.60 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
1950-222

Quantity
Price: 48.95
  • Voltage: 12 Volt
With Rogue Engineering's stand-alone LVD module, you never again need to worry about the battery in your RV or boat being drained by your appliances. Simply wire the module into the power leads for the appliance, and when the battery voltage drops below the set value, power will be disconnected. Power to the appliance will automatically be restored the next time the battery is charged back up. Benefits Easy to install Control up to 150 Watt Load directly or add a separate relay to control even larger Loads 7 position switch makes it easy to choose the shut-off voltage or "always on" LVD override Disconnect voltage selection range from 9.0V to 11.5V Uses an automotive style fuse for protection and easy replacement Applications Idle Reduction for Work Vehicles Off-Grid Solar Installations Recreational Vehicles Many other battery-powered applications Specifications Supports all 12V lead acid batteries 15 Amp automotive style fuse Conformal coated and potted for humid conditions Disconnect voltages are every 0.5V from 9.0V to 11.5V Reconnect voltage is fixed at 1 volt above selected disconnect voltage Self Consumption: Battery (supply) voltage above disconnect threshold: 2 milliamps (mA) and battery (supply) voltage below disconnect threshold: 550 microamps (uA) Alternative configurations available upon request. Minimum order quantities would apply. Testing and Reliability Each LVD is fully tested and inspected, ensuring reliability
(Learn More)
1 2 3 of 5 next
SearchSpring