Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Absorbed Glass Mat Batteries

Showing 1 - 24 of 45 items Search Results for "absorbed glass mat batteries"

1 2 of 2 next

Sort By:

BM Part #:
SLA-6V6-5

Quantity
Price: 19.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 6.5 Ah
  • Warranty: 1 Year
Absorbent Glass Mat (AGM) technology for superior performance Valve regulated, spill proof construction allows safe operation in any position Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air. DOT, IATA, FAA, and CAB certified. UL recognized under file number MH 20845
(Learn More)
BM Part #:
SLA-PS-6580

Quantity
Price: 85.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 58 Ah
  • Warranty: 1 Year
Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any position Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air, D.O.T., I.A.T.A., F.A.A., and C.A.B. certified U.L. recognized under file number M 20845
(Learn More)
BM Part #:
021-1158-12

Battery Tender 12 Volt 20 Amp Battery Charger Free Ground Shipping!
Made to Order - Ships in 2-3 Weeks
Quantity
Price: 411.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 20 Amp
  • Warranty: 2 Year Factory Direct
This is a Heavy Duty Portable Charger with dual independent 12 volt outputs that can deliver a full 20 Amps simultaneously. This product charges a lead acid battery as fast as is chemically and electrically possible without causing any damage. It is perfect for both flooded cells and Absorbed Glass Mat (AGM) sealed batteries. (Note: Please allow 3-4 weeks for shipment of this unit). Charges two 100% discharged Deep Cycle (Group 27) batteries in four to five hours Charges four batteries in eight to nine hours 2 Year Warranty (directly through Deltran)
(Learn More)
BM Part #:
MAR-8AM-U1R

Mazda MIATA Battery Free Ground Shipping!
Quantity
Price: 93.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 400 CA
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for the Mazda Miata. The Marathon AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving driver and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Marathon AGM Battery provides the most advanced power and value in the industry. Specs: Length: 7 3/4in. Width: 5 1/8in. Height: 7 1/4in. 12 Volt Reserve Capacity 45 minutes 320 CCA @ 0°F 400 CCA @ 32°F BCI Designation: U1 Fits all Mazda Miatas from 1990 through 2005 with correct polarity (battery location is in the trunk of the vehicle). If your Miata has its battery located under the hood, please see our Optima D51R Battery. Features: Absorbed Glass Mat (AGM) technology Sealed, Maintenance-Free Leakproof/Spillproof Environmentally friendly, 100% recyclable Vibration Resistant Design Fully Charged out of the box and easy to install 1 Year Warranty Made in the USA Vent tubes for O.E. vent hose attachment.
(Learn More)
BM Part #:
SLA-9A65

Quantity
Price: 159.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 75 Ah
  • Warranty: 6 Month
The 9A65 AGM battery for is for cars, trucks, stereo systems, boats, RVs, hydraulic lifts, winches, on-board electronics, sump pumps, and many other applications. Our AGM batteries are made with the highest quality parts and are guaranteed to be compatible with your original recreational equipment. Built with advanced technology to insure the highest quality standards for reliability, durability and performance, Battery Specifications: Absorbed Glass Mat Technology, Spill Free, No Filling, Ready to go Voltage: 12v 785 CCA @ 0°F Battery Capacity: 75Ah 20HR Approx. Weight: 42.5 lbs Dimensions (+/- 1/16 inch): 12 x 7 3/8 x 7 5/8 inches Absorbed Glass Mat Technology Includes Handle SAE automotive terminals Battery Features: 6 month battery warranty No Acid to fill, No Corrosion Extra cranking power Increased service life Protection against acid leakage and corrosion Impact resistant case and cover Optimum performance in extreme weather conditions OEM Battery Compatible Cross Reference: BCI Group number 65, Group 65, Odyssey 65-PC1750T-A
(Learn More)
BM Part #:
AGM-YHD12

YHD-12 Sealed AGM V-Twin HD Battery Free Ground Shipping!
Quantity
Price: 99.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 28 Ah
  • Warranty: 1 Year
This H-12 battery is specifically designed for the high heat and vibration common in V-Twin vehicles. It features a patented internal post design that takes the original 3 internal connections and reduces them to 1 to increase internal resistance and provide a boost in cranking power. This battery consists of valve regulated lead acid (VRLA) with absorbed glass mat (AGM) separators that is maintenance free. It has stainless steel bolts that are resistant to rust and corrosion. The included flush-mount threaded terminals provide quick, easy installation. 12 Volt 28 Ah 240 CCA AGM Battery for VTwin OEM Replacement: 66007-84, THD-12 *Picture is an approximate representation of the item. Color and brand may vary.
(Learn More)
BM Part #:
PC1500-DT

Quantity
Price: 280.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 850 CCA
  • Capacity (Amp Hours): 62 Ah
  • Warranty: 4 Year
BATTERY DESIGNOdyssey PC1500DT Battery Absorbent glass mat (AGM) technology 12V battery pure lead VRLA SAE Group 34/78 footprint - dual purpose Rugged construction Top tin plated brass SAE terminals and GM side terminals Can be mounted in any orientation except inverted Lifting handle US DOT and IATA certified non-spillable Shipped fully charged - just install and go! Container and cover made from oil resistant plastic Made in the USAPERFORMANCE FEATURESPHCA: 1,500A at 80° F (27° C) for 5 seconds CCA: 850A at 0°F (-18° C) CA/MCA: 1,050A at 32° F (0° C) HCA: 1,250A at 80° F (27° C) Reserve capacity: 125 minutes Short circuit current: 3,100A 62 Ah @ 10hr rate Deep cycling capability: 400 at 80% DODTypical service life: 3 to 10 years, when properly maintained. Operation temperature range: -40° F (-40° C) to 176° F (80° C)DimensionsLength: 10.85" Width: 6.99" Height: 7.82"Warranty4 Year Full Replacement
(Learn More)
BM Part #:
SLA-8V3-2

Quantity
Price: 27.95
  • Voltage: 8 Volt
  • Capacity (Amp Hours): 3.2 Ah
  • Warranty: 1 Year
Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40 °C to +60 °C (-40 °F to +140 °F), and charged at temperatures ranging from -20 °C to +50 °C (4 °F to +122 °F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. Absorbent Glass Mat (AGM) technology for superior performance Valve regulated, spill proof construction allows safe operation in any position Power/volume ratio yielding unrivaled energy density Rugged impact resistant ABS case and cover (UL94-HB) Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified U.L. recognized under file number MH 20845
(Learn More)
BM Part #:
ACC-RS-1

Quantity
Price: 97.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amp
  • Warranty: 2 Year Factory Direct
The Dual Pro 6 Amp Waterproof Battery Charger is an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similiar uses. The system delivers sophisticated capabilities and superior value to customers. Battery Charging Systems Designed for Everyday Applications Affordable, Reliable, and Safe. Trouble free - Just plug it in and forget it! Be one of the many 750,000 satisfied customers! Wide variety of applications. Universal input, 110-220VAC. May be used in many types of every applications including: Bass boats, runabouts, pontoons, other types of watercraft, automobiles, ATVs, golf carts, and more. Product Features Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries Designed for use in fresh and salt water Dependable, rugged construction and waterproof Independent outputs and fully automatic Battery maintenance mode Two year warranty DC charge cables = 5ft and AC power cord = 3ft Approved and meets ISO 8846 Marine standards Models available to charge 12-36V systems LED lights indicate "Each Battery's" state of charge Reverse polarity protected and no installation restrictions Float stage maintenance and independant outputs Ignition protected (US Coast Guard 33 CFR 183.410) FCC 15 Parts A and B Interference Compliant
(Learn More)
BM Part #:
APC-55

Quantity
Price: 195.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 18 Ah
  • Warranty: 2 Year
This RBC55 ups backup replacement battery is rated at 24V, 18.0Ah, 432 Whr. This replacement battery for APC RBC55 is 100% compatible and will meet or exceeds original specification. This RBC55 replacement battery has been tested for safety and designed for high performance. Battery mart offers the RBC55 replacement battery cartridge that is designed to keep your UPS unit fully functional and protect you from downtime and data loss. This RBC55 replacement battery is specifically designed for the APC SUA2200, SUA2200XL, SUA3000, SUA3000XL, SUA2200XLT, SUA3000XLT, SMT2200, SMT3000, SUA5000RMT5U, SUA5000R5TXFMR. The AUP-55 is pre-assembled for easy installation and is designed to meet manufacturer specifications and performance standards. Connector, 100 Amp fuse, and wiring included 2 battery cartridges made of 2 x 12V 18Ah batteries each Absorbent Glass Mat (AGM) Maintenance-Free Operation Heavy Duty Grids for superior performance Batteries are UL recognized under file number: MH47341 Please note: On-Pre 2006 APC 55 models, the connector has been discontinued. For these models, you must remove the connector from your original battery and swap it out with the connector that comes on this battery. APC and RBC55 are registered trademarks of American Power Conversion. Part numbers used herein are for reference purpose only. Pack is made with UL Listed parts and batteries
(Learn More)
BM Part #:
SLA-12V110

Quantity
Price: 219.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 110 Ah
  • Warranty: 1 Year
This battery is made with Absorbent Glass Mat (AGM) technology for superior performance. The valve-regulated, spill-proof construction allows safe operation in any position. Approved for transport by air. DOT, IATA, FAA, and CAB certified. UL recognized under file number MG 20567. Specification: Nominal Voltage: 12 volts Nominal Capacity (at 77°F): 110 Ah Approximate Weight of Battery: 67.24lbs Internal Resistance: 5mOhms 1 Year Warranty Downloadable Product Datasheet (PDF, 447KB) Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory Direct Sealed Maintenance Free The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service Life A dependable service life can be expected under normal operating conditions. Long Shelf Life Low self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature Range May be discharged over a temperature range of -40°C to +60°C (-40°F to +140°F), and charged at temperatures ranging from -20°C to +50°C (4°F to +122°F). Rugged Construction The high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.
(Learn More)
BM Part #:
ETX-15

Big Crank ETX15 Battery Free Ground Shipping!
Quantity
Price: 71.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 220 CCA
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-18L

Big Crank ETX18L Battery Free Ground Shipping!
Quantity
Price: 92.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 340 CCA
  • Capacity (Amp Hours): 20 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-14

Big Crank ETX14 Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 72.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 220 CCA
  • Capacity (Amp Hours): 12 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-15L

Big Crank ETX15L Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 71.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 220 CCA
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-16L

Big Crank ETX16L Battery Free Ground Shipping!
Quantity
Price: 85.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 325 CCA
  • Capacity (Amp Hours): 19 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-14L

Big Crank ETX14L Battery Free Ground Shipping!
Quantity
Price: 74.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 220 CCA
  • Capacity (Amp Hours): 12 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-16

Big Crank ETX16 Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 85.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 325 CCA
  • Capacity (Amp Hours): 19 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-9

Big Crank ETX9 Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 64.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 120 CCA
  • Capacity (Amp Hours): 8 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
SLA-9A-31

Quantity
Price: 197.95
  • Cold Cranking Amps (CCA): 925 CCA
  • Capacity (Amp Hours): 100 Ah / 925 CCA
  • Warranty: 2 Year
Specifications 925 CCA 100 AH @ 20 Hr. Rate Length = 12 7/8" Width = 6 13/16" Height = 8 1/2" to top of battery Ideal for use in commercial, construction, industrial and marine applications The Marathon AGM battery's tight-pack plate and separator absorbed glass mat construction provides added power for resistance against hard-hitting stereo systems, competitive racing or off-road wear and tear vibration. Along with a more efficient design, the Marathon battery has the same case/cover configuration used by original equipment manufacturers for an easier fit into more applications. No elaborate marketing gimmicks or hold-down retrofits, just decades of experience to provide a better fit, more power and long life. Key Features: Maintenance Free Design No need to check electrolyte levels Tightly Packed Construction and Calcium Reinforced Grids Provide greater resistance to shock and vibration Faster Recharge Time Allows for faster turn-around times Sealed Construction Spillproof design provides added protection for sophisticated electronic equipment Easy fit and efficient design allows for easy installation in more applications 2x Life Cycle - Compared to Conventional Batteries Extended Performance and Life 20x More Vibration Resistance Extreme Service Use - Off Road, Construction, Marine Superb Dual Purpose Design Ideal for both starting and deep cycle applications Computer-cast power path grids assures highest quality and optimum performance Advanced Durability Designs Fortified posts, straps and welds resist vibration damage Maximize current transfer over live of battery Power-Perform Full-Frame Positive & Negative Plates Withstands severe service applications Prevents life-robbing electrical shorts from exposed wire Enhanced Electrolyte Suspension System Absorbs more electrolyte, protects internal components Mico-porous glass separators prevents acid spills and terminal corrosion
(Learn More)
BM Part #:
ACC-RS-2

Quantity
Price: 136.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12 Amps
  • Warranty: 2 Year Factory Direct
The Dual Pro 6 Amp Waterproof Battery Charger is an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers. Battery Charging Systems Designed for Everyday Applications Affordable, Reliable, and Safe. Trouble free - Just plug it in and forget it! Be one of the many 750,000 satisfied customers! Wide variety of applications. Universal input, 110-220VAC. May be used in many types of every applications including: Bass boats, runabouts, pontoons, other types of watercraft, automobiles, ATVs, golf carts, and more. Features Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries Designed for use in fresh and salt water Dependable, rugged construction and waterproof Independent outputs and fully automatic Battery maintenance mode Two year warranty DC charge cables = 5ft and AC power cord = 3ft Approved and meets ISO 8846 Marine standards Models available to charge 12-36V systems LED lights indicate "Each Battery's" state of charge Reverse polarity protected and no installation restrictions Float stage maintenance and independent outputs Ignition protected (US Coast Guard 33 CFR 183.410) FCC 15 Parts A and B Interference Compliant
(Learn More)
BM Part #:
ACC-RS3

Quantity
Price: 181.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 6 Amp per Bank (3)
  • Warranty: 2 Year Factory Direct
The Dual Pro 3 Bank, 18 Amp (6 amp per bank) Waterproof Battery Charger is an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similiar uses. The system delivers sophisticated capabilities and superior value to customers. Battery Charging Systems Designed for Everyday Applications Affordable, Reliable, and Safe. Trouble free - Just plug it in and forget it! Be one of the many 750,000 satisfied customers! Wide variety of applications. Universal input, 110-220VAC. May be used in many types of every applications including: Bass boats, runabouts, pontoons, other types of watercraft, automobiles, ATVs, golf carts, and more. Product Features Charges up to three (3) single 12 volt batteries Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries Designed for use in fresh and salt water Dependable, rugged construction and waterproof Independent outputs and fully automatic Battery maintenance mode Two year warranty DC charge cables = 5ft and AC power cord = 3ft Approved and meets ISO 8846 Marine standards Models available to charge 12-36V systems LED lights indicate "Each Battery's" state of charge Reverse polarity protected and no installation restrictions Float stage maintenance and independant outputs Ignition protected (US Coast Guard 33 CFR 183.410) FCC 15 Parts A and B Interference Compliant
(Learn More)
BM Part #:
ETX-12

Big Crank ETX12 Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 66.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 180 CCA
  • Capacity (Amp Hours): 10 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Examples of a side-mount installation without the use of spacers: Big Crank battery where the spacers weren't used. The lack of a flush connection caused the terminal and the battery shell to melt. Close-up of the top of a melted terminal due to non-use of included spacers. Close-up of the front of a melted terminal due to non-use of included spacers. Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. These could differ slightly from OEM. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
ETX-20L

Big Crank ETX20L Battery Free Ground Shipping!

BACKORDERED
AVAILABLE May 2, 2014
Quantity
Price: 87.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 310 CCA
  • Capacity (Amp Hours): 17.5 Ah
  • Warranty: 1 Year
Premium quality absorbed glass mat technology (AGM) is ideal for ATVs, motorcycles, personal watercraft, & snowmobiles. The Big Crank Power Sports AGM Battery was designed for more than performance; it was designed for the enthusiast. Completely spillproof and leakproof; frequent replacement and high maintenance are over! The AGM technology increases power while improving rider and environmental safety. The key to this technology is the highly porous microfiber separators, which completely absorb and trap the electrolyte. Molded top and side connection terminals provide versatility, increased strength and durability. The Big Crank Power Sports AGM Battery provides the most advanced power and value in the industry. 4 Reasons Why You'll Love Big Crank ETX20L Our 100% Satisfaction Guarantee: We're so impressed by the performance of ETX20L we back every order with a 45-day Money Back Guarantee. If your ETX20L isn't as good as we claim please contact us for an exchange, refund, or credit. Incredible Savings: Not only is ETX20L our best selling battery but while stocks last we're taking $49 off the reg. price (that's a 36% lowest-price-on-the-Internet discount). Unfortunately, we can't guarantee this special discount will be online after tomorrow. We Pay for Shipping: Buy today and we'll pay for ground shipping (only valid in the continental 48 states and not valid with any other offer.) ETX20L Is a Customer Favorite: Did you know 99% of ETX20L reviewers said they would recommend this to a friend?? Tech Tip This battery is supplied with unique terminal hardware (2 spacers and 2 bolts for cable to terminal connection). This hardware is required for proper installation on certain applications. Other hardware may damage terminals and should not be used. The spacers are required for side mount cable installation only! The top mount position does not require the round spacers, use supplied bolts only. Torque bolts to 6 to 8 ft. lbs. Good Connection: With the spacer, there is a flat, flush connection between the battery terminal and the cable. This connection will ensure you receive full cranking power. Bad Connection: Without the spacer, the cable does not make a flush connection, creating a gap. This will reduce your cranking power, cause arcing, and will melt your terminals. Click the images to enlarge Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
1 2 of 2 next
SearchSpring