Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Battery Disconnect Switch

Showing 1 - 17 of 17 items Search Results for "battery disconnect switch"

1 of 1

Sort By:

BM Part #:
ACC-51-902

Quantity
Price: 31.95
Features 180 amps continuous capacity 1000 amps peak capacity
(Learn More)
BM Part #:
ACC-41860

Quantity
Price: 14.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 100 Amps
Rated 100 amps continuous, 1000 amps surge, at 12 volts. Rated 50 amps continuous, 500 amps surge, at 24 volts. 21/4" diam. x 21/2" deep (11/4" deep behind panel). Two 3/16" diam. mounting holes. Extra key and waterproof cover included. This Battery Cut Off Switch is a single circuit disconnect switch with detachable key. It isolates the battery circuit for anti-theft, anti-fire, short circuit protection, and unwanted battery drain and is ideal for RV, marine and farm equipment. This battery cut off switch is not for use with vehicles with full time power on demand computers or vehicles with thermostatic controlled cooling fans. Includes two (2) keys and water-resistant cover.
(Learn More)
BM Part #:
WIR-GK-K

Quantity
Price: 4.95
  • Voltage: 6 / 12 / 24 Volt
Installation: Remove your negative battery cable, install the disconnect on the negative battery post and then re-attach the vehicle's cable to the post on the disconnect. To break the connection from the vehicle to the battery just unscrew the knob until it loosens up. It would be a good idea to open a door-etc to confirm that the battery is unhooked from the vehicle (no lights come on-etc.) Wear safety glasses during the install.
(Learn More)
BM Part #:
WIR-ST-9

Quantity
Price: 13.95
  • Voltage: 6 / 12 / 24 Volt
Installation: Remove your negative battery cable, install the disconnect on the negative battery terminal with the bolt provided and then re-attach the vehicle's cable to the threaded terminal of the disconnect. To break the connection from the vehicle to the battery just unscrew the knob until it loosens up. It would be a good idea to open a door-etc to confirm that the battery is unhooked from the vehicle (no lights come on-etc.) Wear safety glasses during the install.
(Learn More)
BM Part #:
ACC-D2903

Quantity
Price: 13.95
This break away kit will lock the trailer brakes if the trailer becomes disconnected from the tow vehicle. For use in single, tandem, and tri-axle trailers. The Breakaway Kit will charge an internal 12V battery (not included) from the vehicle's electrical system. For charging the internal battery when not connected to vehicle please see charger listed below.
(Learn More)
BM Part #:
1950-222

Quantity
Price: 48.95
  • Voltage: 12 Volt
With Rogue Engineering's stand-alone LVD module, you never again need to worry about the battery in your RV or boat being drained by your appliances. Simply wire the module into the power leads for the appliance, and when the battery voltage drops below the set value, power will be disconnected. Power to the appliance will automatically be restored the next time the battery is charged back up. Benefits Easy to install Control up to 150 Watt Load directly or add a separate relay to control even larger Loads 7 position switch makes it easy to choose the shut-off voltage or "always on" LVD override Disconnect voltage selection range from 9.0V to 11.5V Uses an automotive style fuse for protection and easy replacement Applications Idle Reduction for Work Vehicles Off-Grid Solar Installations Recreational Vehicles Many other battery-powered applications Specifications Supports all 12V lead acid batteries 15 Amp automotive style fuse Conformal coated and potted for humid conditions Disconnect voltages are every 0.5V from 9.0V to 11.5V Reconnect voltage is fixed at 1 volt above selected disconnect voltage Self Consumption: Battery (supply) voltage above disconnect threshold: 2 milliamps (mA) and battery (supply) voltage below disconnect threshold: 550 microamps (uA) Alternative configurations available upon request. Minimum order quantities would apply. Testing and Reliability Each LVD is fully tested and inspected, ensuring reliability
(Learn More)
BM Part #:
24V-PROMAX

Quantity
Price: 94.95
  • Voltage: 24 Volt
  • Warranty: 1 Year Factory Direct
The 24 Volt PriorityStart! is an automatic computerized on/off "switching" system protecting battery voltage and starting power. If battery voltage drains below 23.6 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 "starting amps."You have minimized the dangers, lost time and costs associated with a dead battery. Deep discharging a battery means you have already done damage to your battery, and jump starting can cause irreparable damage to the electrical system on board. PriorityStart! maximizes the battery life, your time and your dollars spent. Because there is no hard wiring the unit is transferable. PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
MV-12-WB

Quantity
Price: 92.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
With Marine PriorityStart! you don't have to worry. Sit and listen to the radio, run your lights, enjoy boating without experiencing the dangers associated with a dead battery. Even if you leave a light or radio on when you leave your boat at the dock, no worries! By monitoring the battery's voltage at all times when the key is in the off position, the unit senses if a drain is taking place that would deplete the battery's starting power. It shuts it down, saving your battery's voltage, and allowing you to start your boat. The result: No dead battery.You have minimized the dangers, lost time and costs associated with a dead battery. Deep discharging a battery means you have already done damage to your battery, and jump starting can cause irreparable damage to the electrical system on board. Marine PriorityStart! maximizes the battery life, your time and your dollars spent. Because there is no hard wiring the unit is transferable.Marine PriorityStart! provides:Safety, Security, Peace of Mind, SavingsMinimizes stress level, Maximize battery life, Environmentally friendlySimple 1, 2, 3 installationNo hard wiringCoast Guard CertificationWaterproof system specially designed for marine environments. Maintenance-free, universal design works on all standard or wingnut-post battery's. Handles 1,000 starting amps and exerts a clamping force in excess of 75 linear pounds. No hard wiring required. For use with fishing boats, auxiliary engines, commercial vessels, recreational boats and smaller sporting boats. UL Tested, ISO, CE, SAE, and USCG Certified. PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
12V-PROMAX

Quantity
Price: 89.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
Current models include LED light. Easy to Attach! Connect your existing vehicle positive cable to Priority Start Attach the PriorityStart! cable to your battery's positive post Attach the ground wire to the battery's negative post Specially designed for Law Enforcement, Fleets, Utility, Emergency, and Security vehicles with multiple accessories. PriorityStart! is an automatic computerized on/off “switching" system protecting battery voltage and starting power. If battery voltage drains below 11.7 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 “starting amps". Often multiple accessories mimic “engine run". The Pro-Series is specially designed to handle multiple accessory loads, utilizing higher value electrical components to monitor “engine run" when the engine is off. Pro-Series is successfully being used in vehicles with:2 way/CB radiosRadar SystemsGPSCell phonesComputersFlashlight ChargersMobile EquipmentDual batteriesHi-Amp Stereo SystemsMobile T.V PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276 View Parallel Dual Battery Installation Instructions
(Learn More)
BM Part #:
SLA-PS-605

Quantity
Price: 16.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 0.5 Ah
Brand New First Quality Factory DirectGeneral SpecificationsDimensions:Length2.24 inches57 millimetersWidth0.55 inches14 millimetersHeight1.97 inches50 millimetersHeight over Terminals1.97 inches50 millimetersApproximate Weight0.20 pounds0.09 kilogramsTerminals:Wire Leads - Molex housing 5264-02 & 5263-PBT plugCase:ABS PlasticElectrical SpecificationsNominal Voltage:6 Volts (3 cell in series)Nominal Capacity:20 hour rate(25mA to 5.25 volts)0.50 AH10 hour rate(45mA to 5.25 volts)0.45 AH5 hour rate(80mA to 5.10 volts)0.40 AH1 hour rate(300mA to 4.50 volts)0.30 AHEnergy Density (20 hour rate)1.24 Watt-hours/cubic inch75.2 Watt-hours/lSpecific Energy (20 hour rate)15.0 Watt-hours/pound33.3 Watt-hours/kgInternal Resistance (Fully Charged Battery)360 milliohms (approx.)Replaces:7845CV2 Alarm Battery, PA6VO.5, WP0.5-6WCharging:Cycle Applications: Limit initial current to 100mA. Charge until battery voltage (under charge)reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35 volts until currentdrops to approximately 5mA. Battery is fully charged under these conditions, and charger shouldeither be disconnected or switched to "float" voltage."Float" or "Stand-by Service":Hold battery across constant voltage source of 6.75 to 6.90volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Battery Cross Reference: Amstron: 6V 0.5Ah, AP-605WL Apex Battery: AB45135, I-SLA0846 BatteryBob: 751605, LEAD-6-0.2PS Dantona: LEAD-6-0.5PS Elcotel: S5 Interstate: ASLA0847, SLA0846 , SLA0847 Leoch: DJW6-0.5, LP-6-0-5 Misc. Manufacturer: 7845CV2 Alarm Battery, PA6VO.5, WP0.5-6W Olympian: 5, PS605 Portable Power (PPS): 35L127S1, PS-605WL, Wire Lead with Molex housing 5264-02 & 5263-PBT plug Power-Sonic: 6V 0.5Ah, PS-605W, PS-605WL Protel: 2000, PS605 Sunnyway: SW605 OEM: LP6-0.5, PS-605
(Learn More)
BM Part #:
ACC-IC-1029-S08

Quantity
Price: 40.95
  • Warranty: 1 Year
This 10-slot battery charger charges one to ten (1-10) pieces of AA and AAA batteries and one to two (1-2) pieces of 9v NiCd and NiMH batteries. (Not compatible with any other batteries, such as Lithium, Li-Ion, L-Poly) Includes 110v-230v AC Adapter and car adapter. Charging Current Battery Type Standard Charge Trickle Charge AA / AAA 250 mA 50 mA 9V 30 mA 15 mA Standard Charging Times Battery Size/Chemistry Battery Capacity Charging Time (Approximate) AAA NiCd 180 mAh - 350 mAh 60 - 100 minutes AAA NiMH 600 mAh - 1000 mAh 2 - 4 hours AA NiCd 600 mAh - 1100 mAh 2 - 5 hours AA NiMH 1200 mAh - 2800 mAh 5 - 13 hours 9V NiCd 120 - 150 mAh 4-5 hours 9V NiMH 170 - 350 mAh 5 - 13 hours Charging Instructions Connect the switching power adapter to any 110V-240V AC outlet. A red LED will shine on the power adapter. Insert AA, AAA, or 9V batteries into the charger in the correct slots. If the battery is not chargeable or bad, the LED will flash red or stay blank. If the battery is suitable for charging and battery voltage is within the allowed range, fast-charging mode commences. The LED will blink red, then green, and then turn a steady red to indicate charging. When the battery fully charged or the predetermined charging time (controlled by the safety timer) has elapsed, the charger will switch to trickle-charge mode. The LED will turn green to indicate the battery is fully charged and ready for use (95% minimum). Disconnect the charger from the AC outlet and remove batteries from the charger -It is recommended to charge batteries of the same capacity in each charging process. Discharging: Press and hold the discharge button for several seconds to activate the discharge process. The charger will switch to fast-charging mode automatically when the batteries are discharged sufficiently.
(Learn More)
BM Part #:
ACC-CR1

Quantity
Price: 49.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 3 Amp
  • Warranty: 1 Year
The CR1 from Schumacher Electric is a universal battery charger for battery-powered ride-on toys. The CR1 is compatible with most batteries for 3- and 4-wheel powered ride-on toys, with fully automatic operation that switches from continuous charge to float-mode. Monitoring LEDs indicate battery status, including Power, Charging, and Charged. The versatile quick disconnect harness features 3 different connectors. Reverse hook-up protection protects your child's toys from improper charging damage, and Auto Voltage Detection lets the charger automatically determine whether the connected battery is a 6V battery or a 12V battery. Charge 3x Faster, Ride Longer Microprocessor Controlled Technology with multi-stage charging lets the CR1 deliver added precision, safety, and battery life. This technology lets you charge your child's ride-on toys up to 3x faster, allowing children to spend more time with their toys and less time waiting on a lengthy charge. Auto Voltage Detection The CR1's Auto Voltage Detection automatically selects battery voltage (6V or 12V) and charges properly depending on the type of battery connected. Fully Automatic Operation The CR1 automatically switches from Continuous Charge to Float-Mode Monitoring, which allows the charger to maintain the battery when fully charged. The CR1 resumes continuous charging when the battery becomes discharged. LED Indicators LED lights on the CR1 indicate the connected battery's status, including Charging, Charged, and Check Battery. Quick-Connect Harness The versatile quick-connect harness allows you to attach any three connectors into place in seconds, with reverse hook-up protection that helps protect battery and charger from damage. The harness comes with three connectors designed to fit most models of Peg Perego and Power Wheels ride-on toys. Works with Many Popular Toys The Schumacher CR1 charger is compatible with most Power Wheels, Peg Perego, and Schumacher batteries for 3- and 4- wheel powered ride-on toys. Technical Specifications Charger Type: Fully Automatic Microprocessor Controlled Output Voltage: 6V/12V DC Input Voltage: 120V AC Output Current: 3A Input Current: 0.81A Accessory: 3 Different Connectors Warranty: 1 Year Rating Agency: UL RoHS Compliant: No Energy Star Rated: No
(Learn More)
BM Part #:
BLM-MISC

Quantity
Price: 64.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
Open Box Special This open box special is specially priced. The item comes in like new condition and has been tested to be in working condition. What are Open Box Specials?As BatteryMart.com also has two retail stores, some items in our inventory need to be opened for display or presentation purposes. These items are then marked down to special prices. Current models include LED light. Specially designed for Law Enforcement, Fleets, Utility, Emergency, and Security vehicles with multiple accessories. PriorityStart! is an automatic computerized on/off “switching" system protecting battery voltage and starting power. If battery voltage drains below 11.7 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 “starting amps". Often multiple accessories mimic “engine run". The Pro-Series is specially designed to handle multiple accessory loads, utilizing higher value electrical components to monitor “engine run" when the engine is off. Pro-Series is successfully being used in vehicles with:2 way/CB radiosRadar SystemsGPSCell phonesComputersFlashlight ChargersMobile EquipmentDual batteriesHi-Amp Stereo SystemsMobile T.V PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
IC29VRLIUL-SET

Quantity
Price: 52.95
  • Voltage: 8.4 Volt
  • Capacity (Amp Hours): 600 mAh
  • Warranty: 1 Year (Replacement Only)
9 Volt Lithium-Ion/Polymer charger with two 9 Volt Lithium-Polymer batteries. 100 VAC - 240 VAC Fast charging and fully automatic Includes 2 9 Volt, 720 mAh Lithium Polymer Batteries Material Safety Data Sheet (MSDS) Compatible only with 9 volt Lithium Polymer batteries (2x included) or the Hitech Lithium-Ion batteries (sold separately). 100% Original Manufacturer Compatible and guaranteed to meet Original Specifications. This compact two bank charger includes two (2) 720 mAh Lithium Polymer 9 volt batteries. The charger is fully automatic and charges fast. When the light turns green, your batteries are fully charged. Compatible only with 9 volt Lithium Polymer batteries (included). Also compatible with the original Hitech 9 Volt lithium ion batteries. Our Ultralife 9 Volt Lithium Batteries are NOT rechargeable and are NOT compatible with this unit. You can also buy these batteries separately, if you need extras. 9 Volt Lithium Ion With the Lithium Ion technology, these batteries can perform in many high-drain applications: Wireless Microphones, high-power mini fans, Digital Wireless Guitar/Bass systems, and other high-end equipment. These batteries have higher capacity than heavy-duty or alkaline batteries. Being rechargeable, the 9 Volt Lithium ion batteries are cost-saving and environmentally friendly. Li-Ion batteries are free of Memory Effect. Important note about the voltage of this battery: Rechargeable batteries, like this 9V-size Lithium Ion battery, are rated at a lower voltage than their Alkaline-based alternatives. If your application absolutely requires a full 9 volts to operate, rechargeable batteries may not work for you. Please view the datasheet or give us a call at 1-800-405-2121 for further information. If your device has a charge indicator, this battery will most likely not show a "full" charge when installed. These indicators are calibrated for alkaline 9 volt batteries, which, by design, have a higher initial voltage level than a fully charged rechargeable battery. The battery will work, but the indicator will display inaccurate results. Charging Instructions 1. Connect the power adapter to any 100V-240V AC outlet. The LEDs on the charger will blink red and green, then turn off to indicate that it is ready for use. 2. Insert one or two compatible 9V batteries into the charger; make sure contacts are correctly aligned. If your Li-Ion battery is not chargeable or bad, the LED will blink red slowly. DO NOT attempt to charge Ni-Cd, Ni-MH or non-rechargeable batteries! 3. If the battery is suitable for charging and battery voltage is within the allowed range, the charge will start its fast-charging mode. While charging, the LED will turn to a steady red light. 4. When the battery is fully charged (determined by the battery controller chip), the charger will switch off. The LED will turn green to indicate the battery is fully charged and ready for use (95% minimum). 5. Disconnect the charger from the AC outlet and remove batteries from the charger. This protects the charger from any possible electric surges.
(Learn More)
BM Part #:
XCITER-PLUG

Quantity
Price: 27.95
  • Voltage: 6 / 12 Volt
  • Capacity (Amp Hours): 900 mA
  • Warranty: 1 Year
The AccuSense Charge Xciter™ is a microprocessor-based charger. Designed to increase battery life, lower operating costs and improve system efficiency, HD Digital Technology provides 5-stage battery charging and maintenance. This charger also includes a cigarette plug adapter, making it compatible with jump starters. Comes with cigarette plug adapter, standard battery clamp, and ring terminal leads - all interchangeable with quick-disconnect plug Battery Voltage Selector Switch For 12 Volt Sealed Lead Acid Batteries: Recommended for 5Ah through 20Ah Batteries For 12 Volt Small AGM Batteries and 12 Volt Wet Batteries For 6 Volt Batteries: Recommended for 5Ah through 20Ah batteries Fully automatic Charger/Maintainer - you can leave this charger plugged in without damaging effects. Specifications: Input Rating: 120VAC 0.23Aac 60Hz Output Rating: 6Vdc / 12Vdc 900 mAmp Interchangeable Accessory Leads: Cigarette Plug AdapterRed/Black Battery Clamp LeadsFused Ring Terminal Leads Enclosure Dimensions: 2/5"W x 2.25"D x 3.75"H Works with Jump Starters and Leads Acid Types including AGM, Flooded, Sealed Maintenance Free
(Learn More)
BM Part #:
1206WB

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 3 Amps
  • Warranty: 5 Year Limited Warranty
All the Battery Defender Super Charger features you've come to know and love plus professional super fast connect/release harness with lugs and clamps included. The Battery Defender is not a trickle charger it is fully electronic and fully automatic. Recommended for maintaining EnerSys ODYSSEY and Optima batteries only. Not recommended for charging EnerSys Odyssey or Optima batteries. Charge like a PROfessional and be PROactive by stopping and reversing sulfation on contact. Battery Defender Pro is the charger with a super brain. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of its kind. Features: Included Leads: Non-fused Clamps with quick disconnect Fused Ring Terminals with quick disconnect U.S. Patent Pending De-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed). Small size & light weight: Portability is a major feature. The charger can be installed on-board. One charger for any type of lead acid battery (no switch): Battery Defender Pro charger will charge any type or brand of lead acid battery fully, sealed or dry battery. The charger will adjust itself as the battery gets old. Short circuit protection: If you touch the output Prove & -ve wires (with AC ON) and there will be no failure (no fuse will blow). Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally. No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery. Low voltage start: Battery Defender Pro charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this. Maintain full charge & no overcharging: Battery Defender Pro charger can be left connected to the battery indefinitely without harming (overcharging) the battery. Super fast connect/release harness: Includes clamp harness and lug harness with 7.5 Amp Fuse. Both include weather pack connections. LED Indicator: Orange: Charging Green: Charged UL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals. Soneil Replacement DC Output: 12 Volt 3 Amps Input: 90-130 Volts ~ 1 Amp Max. 60Hz 1 Year Warranty
(Learn More)
BM Part #:
2409SR

Quantity
Price: 91.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 4 Amps
  • Warranty: 1 Year
Alternate Product Currently Available: Schumacher 24 Volt, 5 Amp Automatic Battery Charger with XLR, Rings, and Clamps This is a 24 volt, 5 amp automatic charger. It includes quick-disconnect battery clamps, ring terminals, and 3-pin XLR connector cables. This unit is perfect for wheelchairs, electric scooters, hospital beds, and other battery powered devices with hard-to-access batteries Charge like a professional and be proactive by stopping and reversing sulfation on contact. Battery Defender is the charger with a super brain. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of its kind.Features:U.S. Patent PendingDe-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed).Small size & light weight: Portability is a major feature. The charger can be installed on-board.DO NOT USE WITH AVIATION BATTERIESOne charger for any type of lead acid battery (no switch): Battery Defender charger will charge lead acid and AGM batteries. The charger will adjust itself as the battery gets old.Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure (no fuse will blow).Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally.No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery.Low voltage start: Battery Defender charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this.Maintain full charge & no overcharging: Battery Defender charger can be left connected to the battery indefinitely without harming (overcharging) the battery.Soneil ReplacementUL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals.DC Output: 24 Volt 4 AmpsInput: 115 VAC ~ 2 Amp Max. 50/60HzLED Indicator: Orange: Charging Green: Charged1 Year Warranty
(Learn More)
1 of 1
SearchSpring