Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Electrolyte In Batteries

Showing 1 - 24 of 181 items Search Results for "electrolyte in batteries"

1 2 3 of 8 next

Sort By:

BM Part #:
C-ALK-2PK

Quantity
Price: 2.95
  • Voltage: 1.5 Volt
  • Warranty: 45 Day Return
Unbeatable performance for energy-intensive applications These top-performing C batteries have been specifically designed for use in portable, high-drain digital electronics. From portable CD players to hand-held video games. Powerful energy for your power-hungry devices 10% more energy due to new Triple Energy Fusion Formula Up to 10% longer life than comparable batteries Made in Germany Lower initial cost compared to Lithium and NiMH Rechargeable battery systems Suitable for use across all types of devices 5 year shelf life
(Learn More)
BM Part #:
EVR-EN93-12PK

Quantity
Price: 8.95
  • Voltage: 1.5 Volt
  • Capacity (Amp Hours): 8350 mAh
  • Warranty: 45 Day Return
Energizer Industrial C batteries are the exact same batteries offered to consumers (with the silver labels) except they are specially priced for government and commercial buyers. Most popular long-lasting USA-made power source Very good shelf-life: up to 7 years Lower initial cost compared to Lithium and NiMH Rechargeable battery systems Suitable for use across all types of devices 12 C batteries per Box 1.5 Volts 8350 mAh
(Learn More)
BM Part #:
BAT-C-5000BT

Quantity
Price: 6.95
  • Voltage: 1.2 Volt
Specs: Chemistry: NiMH Volts: 1.2 mAh: 5000 Consumer Tip Can be charged up to 1000 times Standard Charge Time: 14 to 16 hours x 450mA Quick Charge Time: 4 to 6 hours x 1000mA Environmentally Freindly 100% Tested
(Learn More)
BM Part #:
BAT-C-2500-FT

Quantity
Price: 4.95
  • Voltage: 1.2 Volt
  • Capacity (Amp Hours): 2500 mAh
This C NiCD flat top rechargeable battery is made with high quality parts and is guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. These batteries are intended for pack assembly. May not work in consumer applications where a button top C battery is required.
(Learn More)
BM Part #:
BAT-C-5000-TAB

Quantity
Price: 6.95
  • Voltage: 1.2 Volt
These batteries are for pack assembly, and may not work in consumer electronics. Our Rechargeable NiMH C batteries are for these applications. Powerizer quality NiMH C size 5000mAh battery with solder tabs. Make your own high capacity power pack up to 24 V. Dimension: 26D x 50H mm.
(Learn More)
BM Part #:
BAT-SC-2100

Quantity
Price: 3.95
  • Voltage: 1.2 Volt
These batteries are for pack assembly, and may not work in consumer electronics. Our Rechargeable NiMH C batteries are for these applications. Available With or Without Solder Tabs Please specify in Comments Box during Checkout Specs: 2100 MAH Single Sub C NICD cell 1-11/16" L x 7/8" dia.
(Learn More)
BM Part #:
SCR3800NIMH

Quantity
Price: 5.95
  • Voltage: 1.2 Volt
  • Capacity (Amp Hours): 3800 mAh
This Sub C NiMH rechargeable battery is made with high quality parts and is guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. Features and Benefits High quality Sub C size, 3800 mAh Nickel metal hydride (Ni-MH) battery. Up to 35 Amps high drain current rate, ideal for making various battery packs for heavy duty applications such as remote control (RC) toys, electrical guns, power tools and backups. Solderable taps enable cost effective and easy way to make your own power pack of different voltage and shape. Each cell is individually checked before shipping and all the batteries are matched. Ultra high capacity, 40% more running time than other NiCd Sub C batteries. Very long cycle life and rapid battery charge Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time
(Learn More)
BM Part #:
IC-U6S1234-LED

Quantity
Price: 44.95
  • Warranty: 1 Year
This Hitech battery charger features 6 individual charging channels, capable of charging any assortment of AA, AAA, C, and D rechargeable NiCd or NiMH batteries. With delta V control, this charger has a discharge function and a safety timer function. Details: 6-bank charger for AA, AAA, C and D rechargeable Ni-MH and Ni-Cd batteries Charges each battery individually (1 to 6 pieces AA/AA/C/D batteries) Capable of charging both Ni-Cd and Ni-MH batteries at the same time, with automatic detection of battery chemistry. LED light turns red in each slot when charging battery. Once the charging is complete the LED light changes green and automatically switches over to trickle charge mode. Computer controlled with Negative delta V (-V) cut off detection. Features both a discharge function and a safety timer function Will test the battery immediately when inserted into the charger. This will prevent charging bad and low quality batteries. Supports universal voltage 100V-240V Comes with a DC car charger for charging batteries in your vehicle AC/DC adapter built to U/L and CE safety standards. AAA size battery: Charge current of 500mA. Trickle charge 25mA (each slot). AA/C/D size battery: Charge current of 1000mA. Trickle charge 50mA (each slot) Specifications Charging Cell Configuration 1-6 pcs. of AA/AAA/C/D cells Supported Chemis. Ni-Cd / Ni-Mh Charging Current: AAA size battery: Charge current of 500mA. Trickle charge 25mA (each slot). AA/C/D size battery: Charge current of 1000mA. Trickle charge 50mA (each slot) Adaptor Type External plug-in AC adaptor and car DC adaptor AC Adaptor Supported Volt.(V) 100V - 240V (universal voltage) Input (AC adaptor) 100V - 240V AC 60/50Hz Reference on Standard Charge Time Battery Size Battery Capacity Charging Time (Approx.) AAA Ni-Cd 180mAh ---350mAh 20 - 50 minutes AAA Ni-Mh 600mAh ---1000mAh 1 - 2 hours AA Ni-Cd 600mAh ---1100mAh 0.6 - 1.2 hours AA Ni-Mh 1200mAh --- 2800mAh 1 - 2.3 hours C Ni-Cd 1800mAh --- 5500mAh 2 - 3 hours C Ni-Mh 3000mAh --- 9000mAh 3 - 6 hours D Ni-Cd 1800mAh --- 5000mAh 2 - 5 hours D Ni-Mh 3000mAh --- 6000mAh 3 - 6 hours D Ni-Mh 7000mAh --- 9000mAh 7 - 10 hours
(Learn More)
BM Part #:
ACC-CH-V2299

Quantity
Price: 27.95
  • Voltage: 12 Volt
  • Warranty: 6 Months
Recharges batteries in all capacities: 2-4pcs AAA, AA, C, D and 1-2pcs 9V. NiCd & NiMH batteries can be mixed to charge at the same time. Features: Easy to use Plugs into your wall's electrical outlets with the supplied AC adapter when using at your home or office or by the supplied 12VDC car adapter for use in your vehicle's cigarette plug. Recharges NiMH and NiCd batteries. Two (2) to four (4) pieces of high capacity AA, AAA, C and D or one (1) to two (2) pieces of 9V, at a time. The battery life is well protected by the -dV detection and timer protection for AA, AAA, C, and D size batteries. Automatic charging current selection for the different sizes of batteries. LED display for rapid charger, trickle charge, and bad cell detection for AA, AAA, C, and D size batteries. RED LED: Rapid Charge GREEN LED: Cells are ready for use / Trickle Charge Flashing RED LED: Cells are not suitable for charging For 9V Batteries: RED LED: Charging Safety Features: Negative delta V cut-off function Safety time to prevent over charge Short circuit protection Reverse-polarity protection Bad cell detection Estimated Charging times: AAA size: Capacity: 600 - 900 mAh Charging time: 1.5 - 3 hrs. AA size: Capacity: 800 - 2500 mAh Charging time: 1- 3 hrs. C size: Capacity: 1200 - 4500 mAh Charging time: 2 - 7 hrs. D size: Capacity: 1200 - 9000 mAh Charging time: 2- 14 hrs. 9V block size: Capacity: 100 - 200 mAh Charging time: 9-17 hrs.
(Learn More)
BM Part #:
H2-DRY

Quantity
Price: 79.95
  • Voltage: 6 Volt
  • Cold Cranking Amps (CCA): 70 CCA
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 6 Months
6 Volts 14 Amp Hour @10 hr rate 1.4 Ah Charge Current 70 CCA Hard Rubber Ships without acid which can be purchased at most large auto parts stores New bolts included Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. How to make a dry, unfilled battery ready for service Unscrew the filler plugs and press down firmly with your finger on the button of the cell being filled in order to close the vent and prevent overfilling With the button depressed, add the electrolyte (acid) until the filling well reaches the top. Remove your finger to allow the electrolyte to fall to its correct level. Do the same on all cells and replace the filler plugs Allow the battery to stand not less than 12 hours or more than 24 hours so that the electrolyte will cool and completely saturate the plates. After standing, restore the electrolyte level by adding distilled water or approved water to the cells while pressing down on the button as described above. Charge the battery at 1.5 amperes until the specific gravity stops rising. This will require approximately 24 hours. If the temperature of the electrolyte gets too hot, reduce the charging rate and increase the time.
(Learn More)
BM Part #:
GEL-8G-U1

Quantity
Price: 98.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 32 Ah
  • Warranty: 1 Year
Advanced American Technologies and the use of the most modern computer - aided design and manufacturing techniques combine to make Sealed Gel Batteries the new standard by which all other batteries will be judged. Gelled electrolyte won't spill, even if the battery is tipped upside down ... or cracked open. Therefore, you don't have to worry about messy acid spills or corrosion around the batteries or sensitive electronic equipment. Original Equipment in Kangaroo Golf Caddy True gelled electrolyte Length 8 5/16 at the top including the handle brackets Length 7 9/16 at the bottom of the battery Width 5 1/8 Height 7 1/4 including terminal 1 Year Warranty Requires special gel charger to charge Made in the USA This battery is a replacement for: Fortress Scooters, Kangaroo Golf Caddy, Optiway Technology 1700FS, Optiway Technology 1704FS, Optiway Technology 1700SP
(Learn More)
BM Part #:
SLA-6V4-5

Quantity
Price: 7.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 4.5 Ah
  • Warranty: 1 Year
Find Compatibility in Listing Here. Then, Read over 300 Customer Reviews. Sealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Brand New Factory Direct Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40 ºC to +60 ºC (-40 ºF to +140 ºF), and charged at temperatures ranging from -20 ºC to +50 ºC (4 ºF to +122 ºF).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. Satisfaction Guaranteed If the battery isn't a perfect fit, return within 45 days in as-new state with Return Authorization Number (provided upon request) for a full refund. Specifications: Length 2.76 in. Width 1.86 in. Height 3.98 in. Terminal F1 -- 3/16" wide --------> 1 Year Warranty APC Installation: (Adobe PDF) If your current battery or device is listed below, you can confidently buy our 6 Volt 4.5 Ah Sealed Lead Acid Rechargeable Battery - F1 Terminal RBC1 equivalent replaces:1003, 26117, 120255, 241002, 8011230, 1000010149, 12-255, 2UKJ2, 3CE34, 3CE35, 3FM35, 3FM45, 3FM5, 3XE34, 4PG73, 4PG74, 4PG79, 4PG80, 4PG88, 4PH06, 4PH07, 4PH08, 4PH10, 4PH14, 4PH19, 4PH20, 5M6, 5YB74, 6M1, A20638, A20646, A5007, A50642, A50642S, BATDG6-5F, BBBP5-6, BP4-6, BP4.5-6, BP5-6, CA640, CA645, CB640, CB645, CE1-5BS, CFM6V4.6, CP0660, CY0112, D5685, D5733, DG6-5, ELB0604, ELB0605, ELB0642, ES4-6, EVA65F, FB645, FP640, FP645, FXM43, GH640, GP640, GP645, Grainger 5EFF2, GS012P3-LL, HK-3FM4.5, JC640, LC-RB064P, LCR6V4BP, LCR6V4P, LCR6V5P, Lithonia ELB06042, NP4-6, PC640R-F, PE6-4, PE6V4.5F1, PE6V4F, PEV4F1, PS-640, PS-640F, RBC1, SB604B, UB645, WP4-6, WP4.5-6 Also replaces: Neata: NT6-5.0, XK06-044-00885 Sanshui: JL3-XM-4 Sho-Me Flashlight: 09.0985 Streamlight: 44007, Sho-me Vector: VEC199, VEC124, VEC127, HYS660, VEC127Y, 750, SPORT SPOT 138BY, Vector Common Spotlights See all Compatible Models
(Learn More)
BM Part #:
OBD-36V

Quantity
Price: 95.95
  • Voltage: 36 Volt
  • Warranty: 1 Year (Directly Through VDC Electronics)
A charger is required to charge or maintain your batteries. You can find a recommended charger in the related products below. Don't just charge your batteries... Condition them, with or without electric power! The BatteryMINDer OnBoard Desulfators are designed to desulfate your batteries while you are operating your vehicle. The units utilize patented technology to product a wide range of high frequency pulses known as RFP(tm) (Random Frequency Pulsation) designed to dissolve both old and newly formed sulfate. RFP(tm) technology, sweeps the entire frequency range known to cause sulfation crystals to resonate and then safely dissolve them. Sulfuric acid, the main component in the sulfate crystals, safely returns to the battery's electrolyte. The Specific Gravity (S.G.) of the electrolyte is not higher and able to generate more electrical energy-storage capacity than the previously sulfated batteries. Additional advantages of using sulfation-free batteries include extended alternator and belt life, as the vehicle's charging system no longer needs to work as hard trying to charge batteries that will not accept high alternator output current due to sulfation build-up. Better fuel economy can also be expected, as much lower output current is now demanded from the alternator to keep clean, sulfate-free batteries fully charged. Lower alternator output current translates to lower engine level. The BatteryMINDer On-Board RFP(tm) Desulfators - Conditioners can serve up to six batteries at a time. Thus, even large commercial vehicles, boats, commercial equipment require only one unit per system. Units are effective on all brands / types of batteries, including Maintenance-free, Gel, AGM, Deep Cycle, Sealed, and Free-electrolyte. Installation is a simple two wire hook-up. The units stop working shortly after you turn your engine off. They do not use any power while your vehicle is turned off and very little when the vehicle is running.
(Learn More)
BM Part #:
OBD-24V

Quantity
Price: 86.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
A charger is required to charge or maintain your batteries. You can find recommended chargers in the related products below. Don't just charge your batteries... Condition them, with or without electric power! The BatteryMINDer OnBoard Desulfators are designed to desulfate your batteries while you are operating your vehicle. The units utilize patented technology to product a wide range of high frequency pulses known as RFP(tm) (Random Frequency Pulsation) designed to dissolve both old and newly formed sulfate. RFP(tm) technology, sweeps the entire frequency range known to cause sulfation crystals to resonate and then safely dissolve them. Sulfuric acid, the main component in the sulfate crystals, safely returns to the battery's electrolyte. The Specific Gravity (S.G.) of the electrolyte is not higher and able to generate more electrical energy-storage capacity than the previously sulfated batteries. Additional advantages of using sulfation-free batteries include extended alternator and belt life, as the vehicle's charging system no longer needs to work as hard trying to charge batteries that will not accept high alternator output current due to sulfation build-up. Better fuel economy can also be expected, as much lower output current is now demanded from the alternator to keep clean, sulfate-free batteries fully charged. Lower alternator output current translates to lower engine level. The BatteryMINDer On-Board RFP(tm) Desulfators - Conditioners can serve up to six batteries at a time. Thus, even large commercial vehicles, boats, commercial equipment require only one unit per system. Units are effective on all brands / types of batteries, including Maintenance-free, Gel, AGM, Deep Cycle, Sealed, and Free-electrolyte. Installation is a simple two wire hook-up. The units stop working shortly after you turn your engine off. They do not use any power while your vehicle is turned off and very little when the vehicle is running.
(Learn More)
BM Part #:
OBD-48V

Quantity
Price: 105.95
  • Voltage: 48 Volt
  • Warranty: 1 Year Factory Direct
A charger is required to charge or maintain your batteries. You can find recommended chargers in the related products below. Don't just charge your batteries... Condition them, with or without electric power! The BatteryMINDer OnBoard Desulfators are designed to desulfate your batteries while you are operating your vehicle. The units utilize patented technology to product a wide range of high frequency pulses known as RFP(tm) (Random Frequency Pulsation) designed to dissolve both old and newly formed sulfate. RFP(tm) technology, sweeps the entire frequency range known to cause sulfation crystals to resonate and then safely dissolve them. Sulfuric acid, the main component in the sulfate crystals, safely returns to the battery's electrolyte. The Specific Gravity (S.G.) of the electrolyte is not higher and able to generate more electrical energy-storage capacity than the previously sulfated batteries. Additional advantages of using sulfation-free batteries include extended alternator and belt life, as the vehicle's charging system no longer needs to work as hard trying to charge batteries that will not accept high alternator output current due to sulfation build-up. Better fuel economy can also be expected, as much lower output current is now demanded from the alternator to keep clean, sulfate-free batteries fully charged. Lower alternator output current translates to lower engine level. The BatteryMINDer On-Board RFP(tm) Desulfators - Conditioners can serve up to six batteries at a time. Thus, even large commercial vehicles, boats, commercial equipment require only one unit per system. Units are effective on all brands / types of batteries, including Maintenance-free, Gel, AGM, Deep Cycle, Sealed, and Free-electrolyte. Installation is a simple two wire hook-up. The units stop working shortly after you turn your engine off. They do not use any power while your vehicle is turned off and very little when the vehicle is running.
(Learn More)
BM Part #:
BOX-8D-X2

Quantity
Price: 114.95
  • Dimensions: 23.05"L 21.05"W 10.56"H
  • Warranty: 1 Year
This Noco Dual 8D Commercial Battery Box is rotationally modeled from the highest quality, low density polyethylene plastic. This rugged box maintains its tough impact properties in climates down to -40°F (-40°C) Meets USCG Code of Federal Regulation 183.420 and ABYC E-10.7 specification. Four-corner fasting system and captive lidLarge cable entry holesLarge electrolyte reservoir Full flow ventilationBrass inserted star knobsAcid, gasoline, oil, salt, and chemical resistant Impact Resistant to -40°F (-40°C)UV Resistant Battery Box Installation Instructions
(Learn More)
BM Part #:
ACC-SS-2

Quantity
Price: 243.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 20 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-3

Quantity
Price: 306.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-4

Quantity
Price: 399.95
  • Voltage: 12/24/36/48 Volt
  • Capacity (Amp Hours): 40 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-1

Quantity
Price: 162.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-1

Dual Pro 12 Volt 15 Amp Battery Charger Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 208.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-2

Dual Pro 12 Volt 30 Amp Battery Charger - Two 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 287.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-3

Dual Pro Three Bank Pro 12 Volt 45 Amp Battery Charger - Three 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 386.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 45 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-4

Dual Pro Four Bank Pro 12 Volt 60 Amp Battery Charger - Four 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 509.95
  • Voltage: 12/24/36/48 Volt
  • Capacity (Amp Hours): 60 Amps (15 Amps / Bank)
  • Warranty: 3 Year Factory Direct
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
1 2 3 of 8 next
SearchSpring