Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Empi 9volt Battery And Charger

Showing 1 - 24 of 16219 items Search Results for "empi 9volt battery and charger"

1 2 3 of 676 next

Sort By:

BM Part #:
APSCH15

Quantity
Price: 37.95
  • Warranty: 1 Year
This charger is for NiCd and NiMH batteries. Charges AA/AAA in 15-20 minutes Ultimate on the go charger! Uses energy from a power outlet in your car or AC wall-outlet Charges 4 AA or AAA NiMH rechargeable batteries
(Learn More)
BM Part #:
BC-400

Quantity
Price: 57.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 4000 mAh
  • Warranty: 3 Year
Antigravity 4-amp Charger- Works with 120 or 240 voltage. Foreign countries just need adapter for plug. This 4-amp charger is the charger for use with any and all of our Lifepo4 Lithium batteries. With a 4-amp charge rate it offers a fast charge and is a good solid reliable unit for maintaining Lifepo4 (12v) batteries of any size. It can also work as a maintaining type charger for lithium if you have a vehicle with a fast parasitic drain. For Race vehicles using our larger batteries you can check our 8-amp charger which offers a very fast charge rate for those vehicles used for racing or who want a very fast charge.
(Learn More)
BM Part #:
CHG-HIT

Quantity
Price: 82.95
  • Voltage: 7.2V - 18V
  • Warranty: 1 Year
Features: Compatible with many Hitachi power tools, 7.2 - 18 Volt. Can be used with NiCd, NiMH, and Li-Ion batteries. 3-stage mode charging system: Pre-Charge, Constant Charge, Trickle Charge Multi-voltage power tool charger for Hitachi power tools. For 7.2 Volt to 18 Volt batteries, and compatible with NiCd, NiMH, and Li-Ion batteries. This power tool charger is designed with a 3 stage mode charging system: Pre-Charge, Constant Charge, Trickle Charge. It is equipped with a built-in circuit protection to prevent overcharging, short circuits, extended time charging, and will detect damaged or bad batteries. This charge also features a fast charge Output DC 1.5a.
(Learn More)
BM Part #:
AC1210-10

Quantity
Price: 80.95
  • Voltage: 19 Volt
  • Dimensions: 5.90" x 2.98" x 1.22"
  • Capacity (Amp Hours): 5.5 Amp
  • Warranty: 1 Year
This car adapter laptop battery changer is designed to power a variety of brands, models, series of laptop and notebook computers. It plugs into any standard 12 volt DC cigarette lighter power port or 24 volt European truck power socket. This car adapter laptop battery charger is built with the highest quality standards, safety features and has a 1 year warranty. Our batteries and accessories are guaranteed to meet or exceed the original equipment manufacturers specifications. Many are engineered and assembled right here in the USA by highly skilled American workers.
(Learn More)
BM Part #:
JAC0324

Quantity
Price: 72.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 3 Amp
  • Warranty: 1 Year
Aluminum-cased 24 Volt, 3 Amp Battery Charger with Clips This fully automatic charger confirms operation with three colored LED lights. Red indicates AC power is on, yellow shows the battery is charging, and green lets you know that charger has entered float mode. Worldwide Universal AC Input 90-260 volts, 50/60 Hz Charge control: Starts with a modified constant current charge, then to a constant finishing voltage, finishing with it's float standby mode. Current limiting. Fully Automatic: This charger can be left on the battery indefinitely without overcharging. Have a specific connector, like for Bruno chairlifts? You can splice from your original charger to this charger with out voiding your warranty.
(Learn More)
BM Part #:
ACC-ALCLIPKIT

Quantity
Price: 21.95
  • Warranty: 1 Year
Plugs into your fused connector and can adapt an on-board charger to a portable charger. Cord is approximately 12" in length. For use with all Dual Pro SS, RS, & PS Charger models.
(Learn More)
BM Part #:
24BC5-XLR

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amp
  • Warranty: 1 Year
Specification: Input Voltage: 100VAC - 240VAC Input Frequency: 50Hz - 60Hz Output Voltage Bulk Charge: 29.4VDC +/- 0.5VDC Float Charge: 27.4VDC +/- 0.5VDC Output Current Bulk Charge: 5A +/- 0.5A Float Charge: (<) 1.2A Over-voltage Protection: (>) 30VDC Over-current Protection: (>) 5.5A Low Voltage Turn-on: (>) 16VDC + 2V Input Power (Watts): (<) 180 Watts Input Standby Power (Watts): (<) 8 Watts Efficiency: 80% Battery Size Range: 12AH - 50AH Dielectric Withstand Voltage: 2.1KV for 1min. @ 3.5mA Insulation Resistance: 50M omhs min. @ 500VDC to Output Operating Temperature: -10°C ~+ 40°C Storage Temperature: -10°C ~+ 80°C Connector: 3 Pin D (XLR), Pin 1 (+) . Pin 2 and 3 (ground) Standards: UL1012, CUL, FCC Part 15- Class B. Certified as a wheelchair charger
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
UNCUSB1

Quantity
Price: 4.95
  • Warranty: 1 Year
Universal car charger with USB port. Works with any USB cable. Built-in IC chip prevents overcharging and the charger features a blue LED indicator to monitor charging.
(Learn More)
BM Part #:
D1766

Quantity
Price: 1.95
This sealed lead acid battery charger cord is 6 feet long and includes alligator clips.
(Learn More)
BM Part #:
C402

Quantity
Price: 91.95
  • Voltage: 12 Volt
  • Warranty: 1 Year
2 Position Charger & ConditionerCharges and conditions 2 battery packs at a time.Replaces:
(Learn More)
BM Part #:
24054-XLR

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
With 3 Pin XLR Connector for mobility scooters and wheelchairs 24 VOLT - 5 AMP: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty XLR Connector:
(Learn More)
BM Part #:
24054

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
24 Volt - 5 Amp: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty
(Learn More)
BM Part #:
12061

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amps
  • Warranty: 1 Year
12 Volt - 6 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Golf caddies and scooters among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: Includes clamps, approximately 5ft cord length OUTPUT: 12 Volt Nominal; 6 Amp DC Set Voltage (cut-off Voltage): 14.3v +/- 0.1 Float Voltage (come-on Voltage):13.7 +/-0.1 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
24031

Quantity
Price: 59.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 3 Amps
  • Warranty: 1 Year
24 Volt - 3 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial Battery maintenance, OEM applications such as Wheelchairs and Scooters among many other things. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 24 Volt Nominal; 3 Amp DC Set Voltage (cut-off Voltage): 28.6 +/- 0.2 Float Voltage (come-on Voltage):27.2 +/- 0.2 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
TWC6M-HW

Quantity
Price: 26.95
  • Warranty: 1 Year

(Learn More)
BM Part #:
GEL-8G-8D

Quantity
Price: 476.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 225 Ah
  • Warranty: 1 Year
Advanced American Technologies and the use of the most modern computer - aided design and manufacturing techniques combine to make Sealed Gel Batteries the new standard by which all other batteries will be judged. Gelled electrolyte won't spill, even if the battery is tipped upside down ... or cracked open. Therefore, you don't have to worry about messy acid spills or corrosion around the batteries or sensitive electronic equipment.Length 20.25 in.Width 11.01 in.Height 10.01 in.Terminal ComboShips motor freight onlyRequires special gel charger to charge1 Year WarrantyMade in the USA
(Learn More)
BM Part #:
GEL-8G-27M

Quantity
Price: 234.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 86 Ah
  • Warranty: 1 Year
Advanced American Technologies and the use of the most modern computer - aided design and manufacturing techniques combine to make Sealed Gel Batteries the new standard by which all other batteries will be judged. Gelled electrolyte won't spill, even if the battery is tipped upside down ... or cracked open. Therefore, you don't have to worry about messy acid spills or corrosion around the batteries or sensitive electronic equipment.Length 12.75 in.Width 6.75 in.Height 8.97 in.Terminal ComboRequires special gel charger to charge1 Year WarrantyMade in the USA
(Learn More)
BM Part #:
41A12500

Quantity
Price: 9.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 500 mA
Replacement Available:6/12 Volt 500 mA Sealed Lead Acid Battery Charger with Alligator Clips This charger with 6 volt and 12 volt switch is a 500 mili-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Includes charger cord with leadsCharger is for cycle applications and should not remain attached over 24 hours
(Learn More)
BM Part #:
501991-001

AST Ascentia J Series Batt Charger Free Ground Shipping!
Quantity
Price: 63.95
  • Voltage: 10.8 Volt
  • Warranty: 1 Year
This AST Ascentia J Series Battery Charger is 100% compatible with the 501991-001 AST Ascentia J Series Battery Charger. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% quality control assurance. This AST Ascentia J Series Battery Charger includes a warranty to guarantee that it has no manufacturing defects.
(Learn More)
BM Part #:
220461-001

Quantity
Price: 68.95
  • Voltage: 14.4 Volt
  • Warranty: 1 Year
This COMPAQ Armada 7300 Series Battery Charger is 100% compatable with the 220461-001 COMPAQ Armada 7300 Series Battery Charger. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% quality control assurance. This COMPAQ Armada 7300 Series Battery Charger includes a warranty to guarantee that it has no manufacturing defects.
(Learn More)
BM Part #:
220461-001

Quantity
Price: 68.95
  • Voltage: 14.4 Volt
  • Warranty: 1 Year
This COMPAQ Armada 7330MT, 7330T Battery Charger is 100% compatable with the 220461-001 COMPAQ Armada 7330MT, 7330T Battery Charger. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% quality control assurance. This COMPAQ Armada 7330MT, 7330T Battery Charger includes a warranty to guarantee that it has no manufacturing defects.
(Learn More)
BM Part #:
220461-001

Quantity
Price: 68.95
  • Voltage: 14.4 Volt
  • Warranty: 1 Year
This COMPAQ Armada 7350MT, 7350T Battery Charger is 100% compatable with the 220461-001 COMPAQ Armada 7350MT, 7350T Battery Charger. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% quality control assurance. This COMPAQ Armada 7350MT, 7350T Battery Charger includes a warranty to guarantee that it has no manufacturing defects.
(Learn More)
BM Part #:
220461-001

Quantity
Price: 68.95
  • Voltage: 14.4 Volt
  • Warranty: 1 Year
This COMPAQ Armada 7360DMT, 7360DT Battery Charger is 100% compatable with the 220461-001 COMPAQ Armada 7360DMT, 7360DT Battery Charger. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% quality control assurance. This COMPAQ Armada 7360DMT, 7360DT Battery Charger includes a warranty to guarantee that it has no manufacturing defects.
(Learn More)
1 2 3 of 676 next
SearchSpring