Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Everstart 12 Volt Battery Charger Ever Start

Showing 1 - 24 of 92 items Search Results for "everstart 12 volt battery charger ever start"

1 2 3 of 4 next

Sort By:

BM Part #:
ACC-SS-1

Quantity
Price: 162.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
GEN1

Quantity
Price: 127.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Varible Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specfications Battery Banks: 1 Amps/Bank: 10 Amps Total Amps: 10 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12 VDC Efficiency: 90% Approx. Charging Volatge: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 6.0" x 5.1" x 2.5" Weight: 3.75 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
12V-PROMAX

Quantity
Price: 89.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
Current models include LED light. Easy to Attach! Connect your existing vehicle positive cable to Priority Start Attach the PriorityStart! cable to your battery's positive post Attach the ground wire to the battery's negative post Specially designed for Law Enforcement, Fleets, Utility, Emergency, and Security vehicles with multiple accessories. PriorityStart! is an automatic computerized on/off “switching" system protecting battery voltage and starting power. If battery voltage drains below 11.7 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 “starting amps". Often multiple accessories mimic “engine run". The Pro-Series is specially designed to handle multiple accessory loads, utilizing higher value electrical components to monitor “engine run" when the engine is off. Pro-Series is successfully being used in vehicles with:2 way/CB radiosRadar SystemsGPSCell phonesComputersFlashlight ChargersMobile EquipmentDual batteriesHi-Amp Stereo SystemsMobile T.V PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276 View Parallel Dual Battery Installation Instructions
(Learn More)
BM Part #:
BLM-MISC

Quantity
Price: 64.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
Open Box Special This open box special is specially priced. The item comes in like new condition and has been tested to be in working condition. What are Open Box Specials?As BatteryMart.com also has two retail stores, some items in our inventory need to be opened for display or presentation purposes. These items are then marked down to special prices. Current models include LED light. Specially designed for Law Enforcement, Fleets, Utility, Emergency, and Security vehicles with multiple accessories. PriorityStart! is an automatic computerized on/off “switching" system protecting battery voltage and starting power. If battery voltage drains below 11.7 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 “starting amps". Often multiple accessories mimic “engine run". The Pro-Series is specially designed to handle multiple accessory loads, utilizing higher value electrical components to monitor “engine run" when the engine is off. Pro-Series is successfully being used in vehicles with:2 way/CB radiosRadar SystemsGPSCell phonesComputersFlashlight ChargersMobile EquipmentDual batteriesHi-Amp Stereo SystemsMobile T.V PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
OPT-RED-35

Optima 35 Red Top Starting Battery Free Ground Shipping!
Quantity
Price: 158.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 720 CCA
  • Capacity (Amp Hours): 44 Ah
  • Warranty: 1 Year Factory Direct
OPTIMA® REDTOP® 35 Ultra high-performance SPIRALCELL TECHNOLOGY® AGM (absorbent glass mat) battery with reliable cranking power for your auto, car or truck and twice the life. The OPTIMA® REDTOP® will outperform and outlast traditional batteries in demanding cranking/starting applications. The ultimate high-CCA starting battery for vehicles that have alternators capable of keeping up with all electrical loads. The OPTIMA® model number for this battery is 35. If you are replacing an OPTIMA® battery you already have, this model is the same as batteries marked 8020-164, 9020-164, 27936, RED35, SC35A, or N9935RED. Includes applicable installation and/or height adapters for this battery. Full Specifications Battery Model: 35 Part Number: 8020-164 NSN: Number applied for, product currently available UPC Code: 8 11405 00164 2 Performance Data Cold Cranking Amps: 720 Cranking Amps: 910 Nominal Voltage: 12 volts Open Circuit Voltage (fully charged): 12.8 volts Internal Resistance (fully charged): 0.0030 ohms Capacity: 44 Ah (C/20) Reserve Capacity: BCI: 100 minutes (25 amp discharge, 80F (26.7C), to 10.5 volts cut-off) Physical Characteristics Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL TECHNOLOGY. Electrolyte: Sulfuric acid, H2SO4 Case: Polypropylene Case Color: Dark Gray Cover Color: OPTIMA Red Group Size: BCI: 35 Post Type: SAE Post Weight: 31.7 lb Length: 9.38 in Width: 6.75 in Height: 7.69 in Power CCA (BCI 0F): 720 amps MCA (BCI 32F): 910 amps Recommended ChargingThe following charging methods are recommended to ensure a long battery life: (Always use a voltage regulated charger with voltage limits set as described below.) Model: 25 and 35 These batteries are designed for engine starting applications. They are not recommended or warranted for use in deep cycle applications. Recommended Charging Information Alternator: 13.3 to 15.0 volts; no amperage limit Battery Charger: 13.8 to 15.0 volts; 10 amps maximum; 6-12 hours approximate Float Charge: 13.2 to 13.8 volts; 1 amp maximum current (indefinite time at lower voltages) Rapid Recharge (Constant voltage charger): Maximum voltage 15.6 volts. No current limit as long as battery temperature remains below 125F (51.7C). Charge until current drops below 1 amp. All limits must be strictly adhered to. Shipping and Transportation InformationOPTIMA batteries can be shipped by AIR. The battery is nonspillable and is tested according to ICAO Technical Instructions DOC. 9284-AN/905 to meet the requirements of Packing Instructions No. 806 and is classified as non-regulated by IATA Special Provision A-48 and A-67 for UN2800. Terminals must be protected from short circuit.
(Learn More)
BM Part #:
ACC-ISTART

Quantity
Price: 64.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7 Ah
  • Warranty: 1 Year Factory Direct
iStart Personal Jump PackLight weight, powerful booster pack with jumper cables, 12V DC plug, built-in flashlight and charger The iStart Jump Pack from Quickcable doubles as a versatile portable jump pack and a 12 volt power source with its 7Ah battery. Ideal for jump starting cars, small trucks, and rec. vehicles. The jumper cables are 8 gauge with a 22 in. length. Product Features Lightweight, Powerful Personal Jump PackInsulated clamps, cord storage, reverse polarity light and alarm. 12V DC Plug for Cell Phones and Other AccessoriesRecharge or run accessories (adapter not included) Built-in Flashlight, All Controls on FrontUse flashlight as a worklight or safety beacon Built-in Charger and Battery Status MeterEasy to understand and use, all switches conveniently on the front
(Learn More)
BM Part #:
ACC-SC-10030A

Quantity
Price: 113.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 12 / 30 Amp
  • Warranty: 2 Year Factory Direct
Fully Automatic Microprocessor Controlled 100 Amp Engine Start - for emergency starting. 1230 Amp Fast Charge - self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition. Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries. 2 Amp Slow Charge - for charging and maintaining small batteries; charges motorcycle, ATV, snowmobile and lawn tractor batteries. 125 Amp, Sure-Grip Clamps - for top and side-mounted battery posts. Electronic Touch-Pad Controls - easy-to-select switches for Digital Display, Battery Type or Charge/Start. Choose from 12V regular automotive, 12V deep-cycle, 12V AGM or gel cell and 6V regular batteries. Built-in Digital Voltmeter/Tester - helps diagnose problems. Retractable Handle - for easy portability. Cord wrap on back.
(Learn More)
BM Part #:
ACC-OS-6130

Quantity
Price: 339.95
  • Voltage: 6 / 12 Volt
  • Capacity (Amp Hours): 60 Amps
  • Warranty: 2 Year Limited (Directly through Clore Automotive)
6/12 Volt SOLAR Octane Series Wheel ChargerSpeed. Power. Convenience. The most popular configuration in SOLAR wheel chargers, it features a 60A fast charge rate and 250A engine starting assistance. Features a 2-Hour timer for charging convenience, plus its handy test features provides a quick snapshot of battery function and alternator output. Features: 6 and 12 Volt Operation, 115 VAC 60 high, 40 medium and 2 amp low charging rates for use on a variety of batteries. 250 amp engine starting assistance. Enhanced TransoidTM Transformer design for improved durability and increased efficiency. New Quad ForceTM Rectifier design meets the demands of daily professional use. Rugged, Industrial-Grade Clamps for strong connections and efficient power transfer. EZ ViewTM Control Panel enables easy access to gauges and controls. Comfort WalkTM Handle provides hassle-free maneuverability in the shop. New Versa-TrexTM wheels allow easy mobility on any type of surface. Ships fully assembled, saving time and effort right from the start. Specifications: Charging Mode : Timer Voltage Settings : 6/12 Volt 6 Volt Charging Amps UL & CSA Rating : 60 12 Volt Charging Amps UL & CSA Rating : 60/40/2 6 Volt Starting Amps UL & CSA Rating : 185 12 Volt Starting Amps UL & CSA Rating : 250 Timer : 2 HR/Hold Weight : 51 lbs. Warranty : 2 Year Limited
(Learn More)
BM Part #:
ACC-SE-1510MA

Quantity
Price: 94.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 2 Amp, 15 Amp
  • Warranty: 2 Year Factory Direct
Schumacher's Automatic Charger with Engine Start is for use with 6 and 12 Volt batteries and includes 2 LED lights to signal full charge and check battery. Features 100 ampere engine start for emergency starting, 15 ampere fast charge for charging a battery in 2 to 4 hours, and 2 ampere trickle charge for charging a small 12 Volt battery in 2 to 12 hours. This charger is fully automatic and will not overcharge batteries. #specs-table table { float: left; margin-right: 20px; width: 360px; } table.long tbody tr td { padding: 6px; vertical-align: middle; } table.long tbody td { border-bottom: 1px solid #EBE7DE; } .col3 { width: 231px; } .col5 { width: 120px; } Item#1677822 Ship Weight16.0 lbs Charger TypeAutomatic Volts6, 12 Works With6, 12V batteries Settings (qty.)4 Amp Charge Rate100, 15, 2 Recharge Time (hours at amps)2–4 at 15 Trickle Recharge Time (hours at amps)2–12 at 2 Amps100/15/2 Cable Length (in.)72 Cable Gauge10 Clamp MaterialPlated steel Overcharge ProtectionYes Charges Multiple Batteries (qty.)2 Polarity Reversal ProtectionYes Case MaterialSteel Power Cord (ft.)6 Dimensions L x W x H (in.)9 x 10 x 4 1/2
(Learn More)
BM Part #:
SC5A

Quantity
Price: 52.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amp
  • Warranty: 1 Year
12V Switching Power, Digital Processing, Battery Charger and Maintainer For 12 Volt SLI/VRLA/GEL/AGM, CAL/CAL and SPIRAL Batteries. Package Includes: SC5A Charger with 6' AC Cord and 5' DC quick-connect. Ring Terminals, 1' in cord length Clamps, 1' in cord length Instruction Manual Features: Uses two LEDs: Green and Red IP65 Water Resistant: Dust/Splash/Rain protection. Microprocessor controlled 5-stage charging. Switches to float mode automatically (Speed charger). Charge and maintain batteries simultaneously. Auto-polarity, spark free and over-charging protection. Optimizes battery performance and longevity. Five Stage Charging: Desulfation:Save a deeply discharged or a light sulfated battery for recovery. Fast Charge:Charge battery to 75% in the fastest and most efficient manner. Equalization:When the battery reaches 75% charge, the charger starts a charge pulse with a smaller stream current to fully charge in a safe manner. Top-Off:Fully charge the battery without overcharging the battery. Maintenance:Maintain the battery in full-charge status.
(Learn More)
BM Part #:
ACC-INC-812A

12 Volt, 2/12 Amp Automatic Eight Battery Charging Station Free Ground Shipping!

BACKORDERED
AVAILABLE May 1, 2014
Quantity
Price: 738.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2 / 12 Amp
  • Warranty: 1 Year Factory Direct
Industrial Series Battery Charger - Model INC-812A DIGITAL - Automatically selects 2 to 12 amps charging current. Charges up to eight batteries at once. Eight completely independent, fully automatic, microprocessor controlled charging banks - charge 8 different size batteries at the same time Charger automatically selects from 2 to 12 amps output per bank Eight detachable 6 foot cables with 75 amp, color-coded clamps Separate digital display for each bank Separate standard and gel settings to assure a complete charge Multi-stage charging algorithm Safe-start, reverse polarity and short circuit protection - the charger will not apply current to the battery clamps until they are properly connected Overcharge protection - the charger will not over charge the battery Patent pending "thermal runaway" protection Fan-cooled for dependability and peak performance Heavy duty steel case for durability Charges 12 volt lead-acid, deep cycle, AGM and gel cell batteries UL/CUL approved Specifications: Charger Type: Fully Automatic Microprocessor Controlled Output Voltage: 12VDC Input Voltage: 120VAC Output Current Cont: 2A-12A / 6A Accessory: 8 Detachable Battery Clamps Unit Height: 11.87 Unit Width: 19.00 Unit Depth: 11.68 Unit Weight: 28.70 Rating Agency: UL Input Current Cont: 6.0A-20.0A / 11.0A
(Learn More)
BM Part #:
1214S

Quantity
Price: 84.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7 Amps
  • Warranty: 1 Year
Charge like a professional and be proactive by stopping and reversing sulfation on contact. Battery Defender is the charger with a super brain. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of its kind.Features:U.S. Patent PendingDe-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed).Small size & light weight: Portability is a major feature. The charger can be installed on-board.One charger for any type of lead acid battery (no switch): Battery Defender charger will charge lead acid and AGM batteries. The charger will adjust itself as the battery gets old.AC Input voltage: 115 VAC.Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure (no fuse will blow).Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally.No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery.Low voltage start: Battery Defender charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this.Maintain full charge & no overcharging: Battery Defender charger can be left connected to the battery indefinitely without harming (overcharging) the battery.Soneil ReplacementUL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals.DC Output: 12 Volt 7 AmpsInput 115AC (Range 90VAC~132VAC)LED Indicator: Orange: Charging Green: Charged1 Year Warranty
(Learn More)
BM Part #:
1212SR

Quantity
Price: 109.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
Charge like a professional and be proactive by stopping and reversing sulfation on contact. Battery Defender is the charger with a super brain. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of its kind.Features:U.S. Patent PendingDe-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed).Small size & light weight: Portability is a major feature. The charger can be installed on-board.One charger for any type of lead acid battery (no switch): Battery Defender charger will charge lead acid and AGM batteries. The charger will adjust itself as the battery gets old.Dual voltage: 115 and 230VAC. This means you only need one charger for the whole world.Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure (no fuse will blow).Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally.No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery.Low voltage start: Battery Defender charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this.Maintain full charge & no overcharging: Battery Defender charger can be left connected to the battery indefinitely without harming (overcharging) the battery.Soneil ReplacementUL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals.DC Output: 12 Volt 5 AmpsInput: 115-230 Volts ~ 2 Amp Max. 50/60HzLED Indicator: Orange: Charging Green: Charged1 Year Warranty
(Learn More)
BM Part #:
1206WB

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 3 Amps
  • Warranty: 5 Year Limited Warranty
All the Battery Defender Super Charger features you've come to know and love plus professional super fast connect/release harness with lugs and clamps included. The Battery Defender is not a trickle charger it is fully electronic and fully automatic. Recommended for maintaining EnerSys ODYSSEY and Optima batteries only. Not recommended for charging EnerSys Odyssey or Optima batteries. Charge like a PROfessional and be PROactive by stopping and reversing sulfation on contact. Battery Defender Pro is the charger with a super brain. Put the power of super computing to work for your battery. Blast battery destroying sulfation off your battery plates for longer battery life. It is the only charger of its kind. Features: Included Leads: Non-fused Clamps with quick disconnect Fused Ring Terminals with quick disconnect U.S. Patent Pending De-sulfation of battery: The charger will remove loose sulfation and increase the battery life. (Hard sulfation cannot be reversed). Small size & light weight: Portability is a major feature. The charger can be installed on-board. One charger for any type of lead acid battery (no switch): Battery Defender Pro charger will charge any type or brand of lead acid battery fully, sealed or dry battery. The charger will adjust itself as the battery gets old. Short circuit protection: If you touch the output Prove & -ve wires (with AC ON) and there will be no failure (no fuse will blow). Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally. No current drain: If the AC is OFF and the charger is connected to the battery, there will be no drain of current from the battery. Low voltage start: Battery Defender Pro charger will start charging from 0.5 volts. This means a very deeply discharged battery can be charged. Other chargers cannot do this. Maintain full charge & no overcharging: Battery Defender Pro charger can be left connected to the battery indefinitely without harming (overcharging) the battery. Super fast connect/release harness: Includes clamp harness and lug harness with 7.5 Amp Fuse. Both include weather pack connections. LED Indicator: Orange: Charging Green: Charged UL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1, Charger EN 60335-2-29, EMC - listed above) safety approvals. Soneil Replacement DC Output: 12 Volt 3 Amps Input: 90-130 Volts ~ 1 Amp Max. 60Hz 1 Year Warranty
(Learn More)
BM Part #:
ACC-CRS1

Quantity
Price: 197.95
  • Voltage: 12 Volt
  • Warranty: 3 Year Factory Direct
This is not a standalone battery charger and must be connected to the vehicle alternator to work. The Charge On The Run Series is a revolutionary product that has proven to be an important advantage to serious boaters everywhere. This unit utilizes boat engine charging current to charge auxiliary batteries while the engine is running. There are no connections to the ignition system or engine. Just connect to the starting and auxiliary batteries. Provides up to 30% more battery time on the water. The unit is fully waterproof with reverse polarity and short circuit protection. Battery Charging System Designed for Use On Land and in Fresh and Salt Water Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Fast and Easy Installation Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof Wide Variety of Applications Features of Charge On The Run Fast and easy installation Dependable, rugged and light weight construction Fully automatic shut off Advanced microprocessor controlled Waterproof Ignition protected Decreases overnight charge time Reverse polarity protected FCC 15 Parts A & B interference compliant approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410) DC charge cable = 5 ft. Battery systems available: 12V - For a single 12 volt battery
(Learn More)
BM Part #:
OPT-D1200

Quantity
Price: 199.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 12 Amp
  • Warranty: 3 Year Factory Direct
Optima Digital 1200 12V Performance Charger and Battery Maintainer For 12V Automotive, Motorcycle, Marine, Tractor, Power Sports, RVs and More. This 12 Amp OPTIMA charger excels at charging and maintaining flooded and AGM batteries found in automobiles, motorcycles, boats, tractors, RVs, and any other application where you'll find 12 volt batteries. The micro-processor controlled charging profiles will maximize your batteries, giving them the ability to perform at the ultimate level. The OPTIMA Digital 1200 is a favorite option for high-performance AGM batteries, but it's enhanced charging capabilities keep all traditional types of batteries in tip-top shape. Best in Class Features LCD Battery Charging Gauge Backlit LCD display for charging, maintaining, and fault mode indication. Gauge displays battery charging (fill) rate with charger mode and fault messages. Quick Set Selections LED directional indicators prompt user for quick and easy selection of charge profiles by battery type or battery maintainer by connection type (DC clamps or ring terminal cable assembly for stored or seasonal use vehicles). Integrated LED Work Light Ergonomically designed DC charging clamps. Positive clamp comes with push button activated LED light to illuminate battery terminals for easy hook-ups in the darkest of conditions. USB / Maintenance Port USB power and charging for iPads, iPhones, and other devices such as cameras and phones. Installation ring terminal / extension cable included for maintaining batteries during storage periods. Technical Specifications AC Input: 90 to 135 VAC 60 Hz DC Output: 13.3 to 14.9 VDC Digitally & Temperature Controlled Charge Rate: 12 Amps Maximum Large Batteries Up to 3 Amps Small Batteries & 0 to 4 Amp Maintain Mode Battery Types: AGM and Flooded (Lead Acid) Batteries -12V Auto / Marine -12V Motorcycle / Power Sports 12V OPTIMA and High Performance AGM Batteries -Starting AGMs, including OPTIMA RedTop & BlueTop -Dual Purpose AGMs, including OPTIMA YellowTop & BlueTop Cables: 6' AC and DC Cable, 6' Maintainer Cable
(Learn More)
BM Part #:
QPIE12v/6Ax10

Quantity
Price: 759.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amp per bank
  • Warranty: 1 Year Factory Direct
For Wet and Gel Batteries Provides a 6 Amp charge to up to ten 12 volt batteries, all at once. Keeps batteries perfectly equalized Charge one 12 volt battery at 60 amps Individual Cable Length (Starting from the top): 7ft, 6ft, 5ft, 4ft, 3ft. Made in the USA The Octopus is a portable or shelf type charger with (10), 12 volt, 6 amp independent circuits. Batteries in different states of discharge can be connected, and each will receive the proper charge. No over or under charging. The Green LED blinks indicating full charge. The batteries can be left connected indefinitely with only an occasional check of water level. This charger is perfect for gel's and wet starting type batteries. Tri-color LED's indicate what stage each battery is in. The Octopus is polarity protected, and there is no sparking if the charge leads come together. In addition, more than one set of leads can be connected to any battery to increase the rate of charge in 6 amp increments.
(Learn More)
BM Part #:
ACC-SC-8020A

Quantity
Price: 101.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp, 20 Amp
  • Warranty: 5 Year Factory Direct
Fully Automatic Microprocessor Controlled 80 Amp Engine Start - for emergency starting. 10-20 Amp Fast Charge - self-adjusting, variable charge rates for everyday charging needs and maintaining your battery in peak condition. Charges and automatically desulfates and restores car, truck, RV, farm equipment, AGM, gel cell and deep-cycle batteries. 2 Amp Slow Charge - for charging and maintaining small batteries; charges motorcycle, ATV, snowmobile and lawn tractor batteries. 125 Amp, Sure-Grip Clamps - for top and side-mounted battery posts. Electronic Touch-Pad Controls - easy-to-select switches for Digital Display, Battery Type or Charge/Start. Choose from 12V regular automotive, 12V deep-cycle, 12V AGM or gel cell batteries. Built-in Digital Voltmeter/Tester - helps diagnose problems. Retractable Handle - for easy portability. Cord wrap on back.
(Learn More)
BM Part #:
ACC-MAXXCITER

Quantity
Price: 36.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 2 Amp
  • Warranty: 1 Year
DPI's 2 Amp Intelligent Microprocessor Controlled Battery Charger is designed to give you Optimum Performance out of your Batteries. The Built-In Rocker Switch allows charging of 6V or 12V Lead Acid (L.A.) Batteries with just one charge. The Switch has 3 selections: Top: 12V Large Capacity L.A. Batteries. For example Golf Carts or Trolling Motor Batteries Middle: 12V Small Capacity L.A. Batteries. For example Lawn Mower or Motorcycle Batteries Bottom: 6V Large to Small Capacity L.A. Batteries The Internal Microprocessor contains a "5-Stage Intelligent Charge" Algorithm developed by DPI to give you maximum performance. This "Intelligent Charge" starts with a Diagnostics Stage before the charge starts. After the charge completes, the last stage keeps your battery in a "Ready-to-Go" state until you are ready to use it. Specifications: Input Rating : 120Vac, 0.43Aac Output Rating : 6Vdc/12Vdc 2Amp Approvals : UL / CUL Automotive Listed Accessories: Red/Black Battery Clamp Leads Enclosure Dimensions: 3.75in-W x 4.5in-D x2.5in-H (95mm x 114mm x 64mm) Battery Types: Lead Acid types including AGM, Flooded Sealed Maintenance Free
(Learn More)
BM Part #:
PL2310

Quantity
Price: 70.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 2/6/10 Amp
  • Warranty: 1 Year
Fully Automatic, Microprocessor-Controlled Operation - Simply set the charging parameters and press "CHARGE". Properly charges all battery types, including Conventional, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries. Advanced Multi-Phase Charging Process charges each battery based on its specific needs for optimal results. Optimized "Soft Start" and "Battery Recondition" routines specifically address the needs of problem batteries. Enhanced maintenance mode provides ideal long term storage charging. Temperature compensation feature adjusts to changes in ambient temperature. Reverse polarity protection and Battery Fault Detection for safe operation. Thermally activated fan control reduces noise and extends unit life. Data-rich displays provide specific status throughout the charging process. Not just smart - Intelligent INTELLIGENT New PRO-LOGIX Battery Chargers utilize an advanced multi-phase charging process to deliver the optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a 12 Volt lead-acid battery installed in a vehicle, it can be charged and charged right with PRO-LOGIX. VERSATILE New PRO-LOGIX Battery Chargers deliver two tools in one. They function as an advanced automatic battery charger (Phases 1-4) to immediately bring depleted batteries to full charge so that they can be put back into service. Plus, they function as an advanced automatic battery maintainer (Phases 5-7), conditioning and maintaining batteries in long term storage so they are in a ready state when needed. BENEFICIAL The PRO-LOGIX charging process results in improved battery condition and restored reserve capacity. Whether a battery is new and the operator simply wants to keep it in top condition as a preventive maintenance step or is older and in need of reconditioning, PRO-LOGIX will deliver a beneficial service to the battery every time.
(Learn More)
BM Part #:
ACC-INC-800A

Quantity
Price: 667.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 80 Amp
  • Warranty: 1 Year Factory Direct
Industrial Series Battery Charger - Model INC-800A 80 Amp Charger FAST CHARGE - "Industry leading" 35 minute charge returns your battery to service while you wait Microprocessor controlled automatic charging Patent pending "thermal runaway" protection and algorithms allows fast and safe charging Four distinct charging modes FAST charge - 35 mins. for automotive and marine batteries FULL charge - for automotive and marine batteries FULL charge - for lawn tractor / motorcycle / ATV batteries GEL FAST charge - for gel cell batteries 6 volt and 12 volt batteries Designed for flooded, AGM, and gel cell batteries - including spiral cell, orbital, or Optima batteries Charges lawn and garden, motorcycle, and all power sport batteries Charge complete audio alarm and LED UL approved LCD Display Large, easy to read Countdown timer to show time of charge remaining Shows charger mode selections and battery voltage upon start-up Heavy Duty Cables - Over 7 Feet Long Extra long 4GA ultra-flexible welding quality cables with a 125 amp polarized quick connect connector User replaceable cable sets Temperature-control fan cooling system Metallic finished all metal case Compact design for efficient use of counter space Powder coated case for durability
(Learn More)
BM Part #:
G26000

Quantity
Price: 284.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12V @ 26 Amps / 24V @ 13 Amps
The G26000 is a smart, 15 Step, fully automatic switch-mode battery charger and maintainer. The G26000 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A powerful battery charger with specialized charging modes for recovering severely drained batteries that will not accept a normal charge and the ability to perform an equalization charge. The G26000 comes equipped with a remote temperature probe for optimized charging performance. Suitable for most 12V and 24V battery capacities from 25-500Ah, such as Motorcycles, ATVs, UTVs, Snowmobiles, Jet Skis, Cars, RVs, Boats and Trucks. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G26000']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G26000']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G26000']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Wicked Smart Features: 12V/24V CompatibilityCharges 12V and 24V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time Recovery ModeRecovers deeply discharged & sulphated batteries with pulse charging Cold/AGM ModeOptimized charge mode for cold weather or AGM batteries 16V and 32V Boost ModeHelps recover deeply discharged or sulphated batteries for 12V & 24V 13.6V Equalization and Supply ModeCharge mode for maximizing battery capacity, reviving low voltage batteries & can act as a power supply Calcium ModeCharge mode designed for calcium batteries Silent Night ModeDisables the charger's internal fan for quiet nighttime operation What's in the box? G26000 Charger HD Battery clamp connectors HD Eyelet Terminal Connectors Owner's manual and user guide (View PDF) Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4-7: Bulk The Bulk charging process continues using Max Rate, High Rate, Medium Rate and Low Rate charges and returns 80% of battery capacity, indicated by the 25%, 50% and 75% CHARGE LEDs. Step 8: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 9: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 10: Maintenance Continuously monitors the battery voltage to determine if a Maintenance charge should be initiated. If the terminal voltage falls below 12.8V (12V) and 25.6V (24V), the charger will start the Maintenance cycle until voltage reaches 14.4V (12V) and 28.8V (24V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Step 11: 13.6V Supply The 13.6V SUPPLY mode is used for low voltage batteries, maintenance charging or as a power supply. Step 12: 13.6V Equalization The 13.6V EQUALIZATION is used to provide an equalization charge by delivering a constant voltage of 13.6V. Step 13: Silent Night The SILENT NIGHT is used to provide quiet operation by reducing the charging current to 5A (5000mA) and disabling the internal cooling fan. Step 14: 16V Boost The 16V BOOST mode is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 16.5V (17V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again. Step 15: 32V Boost The 32V BOOST is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 33V (34V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again.
(Learn More)
BM Part #:
GEN5

NOCO 12 Volt, 50 Amp Genius 5 Bank Battery Charger - Made in the USA Free Ground Shipping!
Made to Order - Ships in 3 Weeks
Quantity
Price: 556.95
  • Voltage: 12 - 60 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (50 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 5 -- Charges up to five (5) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 50 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-60 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 15.3" x 7.5" x 2.9" Weight: 15.1 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
GEN2

NOCO 12 Volt, 20 Amp Genius 2 Bank Battery Charger - Made in the USA Free Ground Shipping!

BACKORDERED
Available April 25, 2014
Quantity
Price: 186.95
  • Voltage: 12 - 24 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (20 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 2 -- Charges up to two (2) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 20 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-24 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 7.0" x 6.0" x 2.5" Weight: 5.70 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
1 2 3 of 4 next
SearchSpring