Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Kirkland Deep Cycle Batteries Kirkland Marine Battery

Related Searches:

Showing 1 - 24 of 83 items Search Results for "kirkland deep cycle batteries kirkland marine battery"

1 2 3 of 4 next

Sort By:

BM Part #:
12117

Quantity
Price: 44.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.33 Amps
  • Warranty: 5 Year Factory Direct
This product has been replaced by the BatteryMINDer Model 1500: 12 Volt 1.5 Amp Charger/Maintainer/Desulfator Discover a BatteryMINDer that's been Re-engineered and Improved Features: The New: Model 1500 The Old: Model 12117 Description Maintenance Charger-Desulfator Maintenance Charger-Desulfator Voltage 12V 12V Amps 1.5 Amps 1.33 Amps Power Source 100-240 VAC; 50/60 Hz 120 VAC; 60Hz Temperature Compensation Yes No Bad Cell Detection Yes No Minimum Start Up Battery Voltage 3 Volts 10.5 Volts 5-Stage Charger Yes No Plug 'n Run "no buttons" Yes No Form factor Wall Plug-In Wall Plug-In cULus/ETL Yes Yes Energy Star / CEC Yes No Automatic pulse desulfation Yes Yes Ambient Temperature Sensor (ATS-1) Included, installed No Battery Clips Included Included Ring Terminal Assembly Available as an optional accessory Included Optional mounting clips Included No Multiple batteries (Qty.) 4 as a Maintainer. Requires use of Y-Connectors 210AY (sold separately) 4 as a Maintainer. Requires use of Y-Connectors 210AY (sold separately) or customer-supplied 18 gauge wire. Works with Battery Types 12 volt Flooded (filler caps), Sealed, Maintenance-free, Starter, Deep Cycle, Marine, Hybrid and Optima brand Sealed AGM 12 volt Flooded (filler caps), Sealed, Maintenance-free, Starter, Deep Cycle, Marine, Hybrid Guarantee / Warranty 1 Year Unconditional / 5 Year "No Hassle" 1 Year Unconditional / 5 Year "No Hassle"
(Learn More)
BM Part #:
SCC005

Quantity
Price: 134.99
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Watts
  • Warranty: 2 Year Factory Direct
The BatteryMINDer is a 3-mode maintenance charger and desulphator-conditioner that extends performance and life of all types of 12 Volt lead acid batteries. These include maintenance-free, marine, sealed, AGM, dry and valve-regulated batteries. This BatteryMINDer provides full-time desulphation in all modes. The unit comes with a Battery Condition Indicator that has a push button for testing the condition of the battery. Please note: With .33 amps charge output (1 amp for the 15 watt model) the battery size must be considered. Large Deep Cycle/RV batteries can be maintained but not fully recharged from a deep discharge with this panel. If you have any questions, please contact one of our battery specialists. Features Includes one lug harness Brackets included 5 watt amorphous silicon solar panel PulseMode Circuitry Auto-Float control Automatic 3-mode operation Dissolves power robbing sulphation and prevents new sulphation (caused by self-discharge). LED indicators for Charge, Polarity Reversed and Solar Power. Shuts off completely when sunlight is reduced with no drain on the batteries. Meets exact maintenance float charge rate of all major sealed, dry-type battery makers. Guarantees full charge without ever overcharging. Prevents permanent cell damage due to self-discharge. Allows battery to be stored safely at -0°F to +120°F. Supplies exact voltage and current required – never more. Temperature short circuit and polarity reversal protected. Designed/engineered in the USA. Built in strict accordance with ISO 9001 Quality Certification. 1-year money-back guarantee handled directly through VDC. General Specifications Model SCC005 Output 12 volts @ 333 mA Charge Voltage 14.2 Vdc Float Voltage 13.2 Volts Desulphation Pulse 333 mA @ 3.26 MHz Float Current 5mA - 150 mA* 18 ft Panel to Controller Cable Solar Panel Size: 13.5"W x 19.5"L x 0.625"H* Actual current output is determined by individual battery demand. Technical Specs: (Adobe PDF) (Manual 1 Adobe PDF) (Manual 2 PDF)
(Learn More)
BM Part #:
ACC-SSC-1500A-CA

Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15/8/3 Amp
  • Warranty: 5 Year Factory Direct
This 12 Volt charger is ideal for charging deep-cycle, gel cell, AGM, and regular automotive lead-acid batteries. Formally the SSC-1500A. This charger now meets CA energy efficiency regulations. 15 Amp Fast Charge/8 Amp Fast Charge: Charger monitors battery condition and adjusts charge rate to prevent battery damage; for car, truck, marine, RV, farm equipment, AGM, gel cell, and deep-cycle batteries. 3 Amp Slow Charge: For charging small batteries and maintaining large ones; charges motorcycle, ATV, snowmobile, and lawn tractor batteries. Microprocessor Controlled: for precise monitoring and charging. Multi-Stage Automatic Charging: Includes constant current for greater efficiency and less heat. Float-Mode Monitoring: helps maintain battery. Battery Test: Diagnose battery condition and measures battery voltage. Desulphation/Restore Mode: Prolongs battery life. Slim Profile: Makes storage and hanging easy. High-Impact Case: Rust-proof and corrosion resistant. Electronic Push-Button Controls: Easy-to-feel switches for selection of Display Mode, Charge Rate, or Battery Type: choose from regular automotive (low maintenance or maintenance free), deep cycle, AGM, or gel cell batteries. Easy-To-Read Digital Display: Indicates battery charge status and test results. 50 Amp Clamps: For top and side-mounted battery posts. 6-ft. Power and Output Cords: Combine for a 12-ft reach. Retractable Handle & Self-Stored Cables: for compact storage and portability. Reverse-Hookup Protection: Checks the polarity of the connected battery and only stats charging if correctly connected. AC Power Compensation: Works even if the electric power from the AC outlet is below normal. Short Circuit Protection: For safe charging.
(Learn More)
BM Part #:
12106

Quantity
Price: 62.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 1 Amp
  • Warranty: 5 Year Factory Direct
BatteryMINDer is the first of a new generation of "Computer-On-A-Chip" technology. It conditions "sulphated" batteries as well as automatically charging any type 6 volt storage battery without ever over-charging.The BatteryMINDer is a 3-mode charger/maintainer/conditioner that extends performance and life of all types and sizes of 6 Volt lead acid batteries. These include maintenance-free, marine, deep cycle, sealed and all popular brands of AGM dry-type, valve-regulated batteries, such as InterState, Exide, Optima and Odyssey. FREE battery condition indicator ($12.95 retail value), with instant pushbutton LED read-out, when you register your warranty on the manufacturer's web site. Simple connection to any type 12 volt battery. Battery Condition Indicator Model 12103 Includes one Clamp Harness and one Lug Harness6 Volt Battery charger, maintainer and conditionerCharges at 1 AmpAlso de-sulphate's BatteryCharge/Maintain up to 4 batteries (of similar type - in parallel) The wires to connect multiple batteries are not included. Use 18 gauge lamp cord wire.Polarity reversal / short circuit over temperature protectionCharge indicator shows correct connections plus 'blinks' when battery reaches full chargeComes with Qwik Connect with Clamps & Ring TerminalsComes with mail-in offer for free SureGuard that retails for $29.95 which will protect and display the condition of your battery and charging system instantlyCan be left on for months at a timeOnly costs $0.15 a month to run 24/7Will not damage your battery5 Year Manufacturer WarrantySpecs:Model 12106Input 105-130 Vac 50/60 HzOutput 6 volts @ 1.0 AmpsCharge Voltage 7.2 VdcFloat Voltage 6.5 VdcDesulphation Pulse 1.0A @ 3.26 MHzFloat Current 5 Ma - 200 Ma*Size/Weight 3-1/4" L x 1-3/4" W x 2-1/4" H / 2 lbsCord Length: 12' outputTechnical Specs: (Adobe PDF) (BatteryMINDer Manual PDF)
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
ACC-41860

Quantity
Price: 14.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 100 Amps
Rated 100 amps continuous, 1000 amps surge, at 12 volts. Rated 50 amps continuous, 500 amps surge, at 24 volts. 21/4" diam. x 21/2" deep (11/4" deep behind panel). Two 3/16" diam. mounting holes. Extra key and waterproof cover included. This Battery Cut Off Switch is a single circuit disconnect switch with detachable key. It isolates the battery circuit for anti-theft, anti-fire, short circuit protection, and unwanted battery drain and is ideal for RV, marine and farm equipment. This battery cut off switch is not for use with vehicles with full time power on demand computers or vehicles with thermostatic controlled cooling fans. Includes two (2) keys and water-resistant cover.
(Learn More)
BM Part #:
OPT-46B24R

Quantity
Price: 176.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 450 CCA
  • Capacity (Amp Hours): 38 Ah
  • Warranty: 3 Year
Direct fit for 2004 and newer Toyota Prius with SmartKey System. New to BatteryMart.com, the Optima DS46B24R battery is one of the most-asked for and most-sought out batteries ever. This Optima battery for the Toyota Prius is a direct replacement for all models 2004 and up, and is the first Optima product to provide a direct fit for the Prius. You can purchase this battery assured that it will drop right into your car. OPTIMA vs Prius OE Ah (C/20 Rate) CCA Warranty Optima 38 450 3 years Large (SmartKey) OE Service 32 361 1 year Small (Non-SmartKey) OE Service 27 313 1 year Optima Difference +18% +24% +2 years The Optima DS46B24R integrates with the current Toyota OE vent system without any special installation. It is built to Optima's unbeatable standards, so you can expect to find Optima's world-class deep cycle dependability, vibration resistance 15 times above traditional batteries, and a long shelf life thanks to Optima's low-discharge rate. YellowTop Deep Cycle Battery by Optima Group Size S46B24R Crank Amps (CA): 575 Cold Crank Amps (CCA): 450 Amp Hour (Ah): 38 Reserve Capacity (RC): 66 Only for cars with the SmartKey system About Optima Yellowtop Batteries:Optima's YellowTop batteries are dual-purpose starting and deep-cycle batteries. They provide engine starting power plus deep cycle capacity to support multiple accessories, demanding electrical systems, and vehicles without alternators.
(Learn More)
BM Part #:
SCC015

Quantity
Price: 179.99
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15 Watts
  • Warranty: 2 Year Factory Direct
Solar Charger Controllers, Desulphators, Panels When solar panels are used to charge storage batteries (as in recreational vehicles, boats, remote monitoring and many home installations), their limited output under low sunlight conditions leads to seriously shortened battery life and performance. Trying to protect against this creates higher costs, as the typical solution is to increase the size / number of both the panels and batteries. In addition, typical solar controllers, although able to protect batteries from under/over charge, fail to optimize the charge rate capabilities of the solar panels. They also do not remove sulphate* build-up on the battery's storage plates, causing longer recharge time, boil out and shortened life. Our BatteryMINDer model SCC015 (shown on the right) is a "Smart" Pulse Width Modulated solar charge controller-desulphator. In addition to protecting batteries from over/under charge, its unique design optimizes charge rate, ensuring batteries are recharged in the shortest possible time, keeping them at full-charge indefinitely, without ever overcharging. A patented high frequency pulse circuit continually desulphates the battery's storage plates, allowing batteries to safely accept the highest possible rates of charge in the shortest time. Because of its pulse type output and hi-lo temperature compensation, model SCC015 BatteryMINDer can be used on all types and brands of solar panels and lead acid batteries including deep cycle and sealed AGM. Model SCC015 is part of a complete battery maintenance system with both the SolarGuard battery condition monitor and a high efficiency 15-watt amorphous silicon solar panel. *Sulphate is considered to be the major cause of reduced performance and early battery failure (Battery Council International [BCI] January 1998. Frequently Asked Questions Q: What do the experts say? A: Here at BatteryMart.com every product is thoroughly tested. BatteryMINDer has been tested by our in-house panel of experts who compared it with major competitors. Their conclusion? BatteryMINDer is a top pick. Q: Is it a big seller on BatteryMart.com? A: YES. We've had this model in stock for nearly 5 years and have already sold hundreds of units. Q: Can the Solar BatteryMINDer be used to charge, maintain and desulphate any size or type lead acid 12-volt battery such as sealed gel, agm, deep cycle, marine, maintenance free electrolyte? A: YES, BatteryMINDer can charge, maintain and desulphate any type size lead acid based battery, regardless of construction or brand. It is however limited in power (charge current output) by the solar panel (15 watts = 15-v @ 1.0 amps). If possible, always charge your battery(s) to full capacity using a plug-in type 120 Vac input high output charger, before connecting it to your solar maintenance charger. Q: Can BatteryMINDer be used to maintain and desulphate more than one battery at a time? A: YES, but remember the limitation of the solar panel will determine how much current output your Solar BatteryMINDer can supply to the battery. Normally, up to 4 parallel connected batteries can be maintained, if they are in good condition. See our definition of a good" battery in instructions for the Battery MINDer SCC015 solar maintenance charger-desulphator. Scientific basis for de-sulphation process / circuitry Every element known to man has a magnetic moment at a resonant frequency ie, a point at which the chemical bonds that hold the molecules together to form a crystal can be broken. Sulphation, the number one cause of early battery failure, is simply crystals of lead sulphate (PbSO4) which have formed on the lead storage plates in a lead-acid type battery. Magnified views of battery plates: New battery Sulphated plates (Note the large crystals) After dusulphation using high frequency pulses When a battery is improperly charged (over/under) or allowed to self discharge as occurs during storage/non-use, these crystals build up on the battery's storage plates preventing the battery from ever being fully charged and therefore able to deliver their full power/capacity. VDC Electronics, Inc. has created a simple method of generating the required resonant frequency (3.26 megahertz pulse) to breakdown the lead sulphate crystals, allowing the molecules to return to the battery's electrolyte. By creating a wave form with the required 3.26 HHz frequency, coupled with a very fast rise time and a high amplitude pulse, more energy is developed to breakdown sulphation than by any other method believed to exist. On February 6, 2001 this unique approach was granted a U.S. Patent Note: Not every battery is a candidate for re-conditioning due to mechanical damage, due to vibration or contamination, which has caused its cells to be shorted. If however a 12 volt battery has a resting voltage of at least 10.5V and none of the 6 cells are shorted, de-sulphation of its plates can be accomplished. Technical Specifications and Features Features Includes one lug harness Brackets included 15 watt amorphous silicon solar panel PulseMode Circuitry Auto-Float control Automatic 3-mode operation Dissolves power robbing sulphation and prevents new sulphation (caused by self-discharge). LED indicators for Charge, Polarity Reversed and Solar Power. Shuts off completely when sunlight is reduced with no drain on the batteries. Meets exact maintenance float charge rate of all major sealed, dry-type battery makers. Guarantees full charge without ever overcharging. Prevents permanent cell damage due to self-discharge. Allows battery to be stored safely at -0°F to +120°F. Supplies exact voltage and current required – never more. Temperature short circuit and polarity reversal protected. Designed/engineered in the USA. Built in strict accordance with ISO 9001 Quality Certification. 1-year money-back guarantee handled directly through VDC. General Specifications Model SCC015 Shipping Weight: 67 pounds Output 12 volts @ 1 Amps Charge Voltage 14.2 Vdc Float Voltage 13.2 Vdc Desulphation Pulse 1A @ 3.26 MHz Float Current 5 Ma – 1 Amp* 18 ft Panel to Controller Cable Solar Panel Size: 12.5"W x 36"L x 1"H 2 Year Warranty (Handled directly through VDC) * Actual current output is determined by individual battery demand. Technical Specs: (Manual 1 PDF) (Manual 2 PDF)
(Learn More)
BM Part #:
SLA-9A34

Quantity
Price: 139.95
  • Cold Cranking Amps (CCA): 750 CCA
  • Capacity (Amp Hours): 55 Ah / 750 CCA
  • Warranty: 2 Year
100% MAINTENANCE-FREE ELIMINATES NEED TO CHECK FLUID LEVELS.Electrolyte absorbed by micro-porous glass separators eliminates acid spills and terminal corrosion.Tightly "packed" construction and calcium reinforced grids provide greater resistance to shock and vibration.Faster recharge than conventional batteries allows for faster turnaround times.Sealed construction provides added protection for sophisticated electronic equipment.Easy fit and efficient design allows for easy installation in more applications.Superb dual purpose design delivers great starting and deep cycle service.Highly porous separators lowers resistance and increases power.Computer-cast power path grids assures highest quality and optimum performance.Includes handle. Flush manifold vented cover.Automotive Top Post Terminal55 Ah, 750 CCAReserve Capacity: 120 Minutes
(Learn More)
BM Part #:
SLA-9A78DT

Quantity
Price: 141.95
  • Cold Cranking Amps (CCA): 750 CCA
  • Capacity (Amp Hours): 55 Ah / 750 CCA
  • Warranty: 2 Year
100% MAINTENANCE-FREE ELIMINATES NEED TO CHECK FLUID LEVELS.Electrolyte absorbed by micro-porous glass separators eliminates acid spills and terminal corrosion.Tightly "packed" construction and calcium reinforced grids provide greater resistance to shock and vibration.Faster recharge than conventional batteries allows for faster turnaround times.Sealed construction provides added protection for sophisticated electronic equipment.Easy fit and efficient design allows for easy installation in more applications.Superb dual purpose design delivers great starting and deep cycle service.Highly porous separators lowers resistance and increases power.Computer-cast power path grids assures highest quality and optimum performance.Includes handleFlush manifold vented coverDual terminal universal design750 CCAReserve Capacity: 120 Minutes
(Learn More)
BM Part #:
SLA-9A34M

Quantity
Price: 139.95
  • Cold Cranking Amps (CCA): 750 CCA
  • Capacity (Amp Hours): 55 Ah
  • Warranty: 2 Year
100% MAINTENANCE-FREE ELIMINATES NEED TO CHECK FLUID LEVELS.Electrolyte absorbed by micro-porous glass separators eliminates acid spills and terminal corrosion.Tightly "packed" construction and calcium reinforced grids provide greater resistance to shock and vibration.Faster recharge than conventional batteries allows for faster turnaround times.Sealed construction provides added protection for sophisticated electronic equipment.Easy fit and efficient design allows for easy installation in more applications.Superb dual purpose design delivers great starting and deep cycle service.Highly porous separators lowers resistance and increases power.Computer-cast power path grids assures highest quality and optimum performance.Includes handle.Flush manifold vented cover.Automotive Post and Marine Terminal750 CCAReserve Capacity: 120 Minutes
(Learn More)
BM Part #:
021-1158-12

Battery Tender 12 Volt 20 Amp Battery Charger Free Ground Shipping!
Made to Order - Ships in 2-3 Weeks
Quantity
Price: 411.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 20 Amp
  • Warranty: 2 Year Factory Direct
This is a Heavy Duty Portable Charger with dual independent 12 volt outputs that can deliver a full 20 Amps simultaneously. This product charges a lead acid battery as fast as is chemically and electrically possible without causing any damage. It is perfect for both flooded cells and Absorbed Glass Mat (AGM) sealed batteries. (Note: Please allow 3-4 weeks for shipment of this unit). Charges two 100% discharged Deep Cycle (Group 27) batteries in four to five hours Charges four batteries in eight to nine hours 2 Year Warranty (directly through Deltran)
(Learn More)
BM Part #:
PC1800-FT

Quantity
Price: 575.33
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 1300 CCA
  • Capacity (Amp Hours): 214 Ah
  • Warranty: 2 Year
Like an athlete that is both a sprinter and a long distance runner, the ODYSSEY Trolling Thunder/Marine Dual Purpose battery has both massive starting power and amazing deep cycling capability - up to 400 cycles at 80% depth of discharge. With twice the overall power and three times the life of conventional marine batteries, the ODYSSEY battery is ideal for trolling, starting, and for powering the many on-board electronic accessories common in today's boats and recreational vehicles.
(Learn More)
BM Part #:
PC1500-DT

Quantity
Price: 280.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 850 CCA
  • Capacity (Amp Hours): 62 Ah
  • Warranty: 4 Year
BATTERY DESIGNOdyssey PC1500DT Battery Absorbent glass mat (AGM) technology 12V battery pure lead VRLA SAE Group 34/78 footprint - dual purpose Rugged construction Top tin plated brass SAE terminals and GM side terminals Can be mounted in any orientation except inverted Lifting handle US DOT and IATA certified non-spillable Shipped fully charged - just install and go! Container and cover made from oil resistant plastic Made in the USAPERFORMANCE FEATURESPHCA: 1,500A at 80° F (27° C) for 5 seconds CCA: 850A at 0°F (-18° C) CA/MCA: 1,050A at 32° F (0° C) HCA: 1,250A at 80° F (27° C) Reserve capacity: 125 minutes Short circuit current: 3,100A 62 Ah @ 10hr rate Deep cycling capability: 400 at 80% DODTypical service life: 3 to 10 years, when properly maintained. Operation temperature range: -40° F (-40° C) to 176° F (80° C)DimensionsLength: 10.85" Width: 6.99" Height: 7.82"Warranty4 Year Full Replacement
(Learn More)
BM Part #:
24V-PROMAX

Quantity
Price: 94.95
  • Voltage: 24 Volt
  • Warranty: 1 Year Factory Direct
The 24 Volt PriorityStart! is an automatic computerized on/off "switching" system protecting battery voltage and starting power. If battery voltage drains below 23.6 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 "starting amps."You have minimized the dangers, lost time and costs associated with a dead battery. Deep discharging a battery means you have already done damage to your battery, and jump starting can cause irreparable damage to the electrical system on board. PriorityStart! maximizes the battery life, your time and your dollars spent. Because there is no hard wiring the unit is transferable. PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
PC1220

Quantity
Price: 299.92
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 680 CCA
  • Capacity (Amp Hours): 64.8 Ah
  • Warranty: 2 Year
PC 1220 Design: Made in the USA 70% longer cycle life Longer shelf life Fast recharge - capable of 100% recharge in 4-6 hours Mounting flexibility - non-spillable design Extreme temperature tolerance Totally maintenance free Longer service life: 3 to 10 years, when properly maintained. 2 year warranty Performance Features and Specifications: Voltage: 12 Volt PHCA: 1,220A at 80°F (27°C); for 5 seconds CCA: 680A at 0°F (-18°C) CA/MCA: 860A at 32° (0°C) HCA: 960 at 80°F (27°C) Capacity (at 10hr rate): 64.8Ah Reserve capacity: 135 minutes on 25amps Short circuit current: 2,200A Deep cycling capability: 400 at 80% DOD Dimensions: 11.89L x 6.88W x 7.48H Battery Weight: 45.6lbs Terminal: DIN Lead Post Internal Resistance: 5.7 ohms Design life: 12 years Typical service life: 6 to 8 years Group 48 and Group 94R 2 Batteries in 1 The Odyssey PC1220 battery combines in one box the characteristics of two separate batteries. It can deep cycle (be recharged) as well as provide enormous cranking power. Military Grade Only Hawker Odyssey batteries are based on the same battery technology offered by Hawker to the military for aircraft and tank batteries. Odyssey batteries are of military grade and have endured rigorous tests that demonstrate their overall ruggedness and exceptional tolerance of mechanical abuse. Superior cranking and fast charge capability The 5 second cranking power of Odyssey batteries is double to triple that of equally sized conventional batteries, even when the temperature is as low as - 40° C. Also, with simple constant voltage charging (alternator or independent charger), there is no limitation on the inrush current, so the user is assured of a fast charge.
(Learn More)
BM Part #:
PC1350

Quantity
Price: 327.48
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 770 CCA
  • Capacity (Amp Hours): 88.5Ah
  • Warranty: 2 Year
PC 1350 Design: Made in the USA 70% longer cycle life Longer shelf life Fast recharge - capable of 100% recharge in 4-6 hours Mounting flexibility - non-spillable design Extreme temperature tolerance Totally maintenance free Longer service life: 3 to 10 years, when properly maintained. 2 year warranty Performance Features and Specifications: Voltage: 12 Volt PHCA: 1,350A at 80°F (27°C); for 5 seconds CCA: 770A at 0°F (-18°C) CA/MCA: 960A at 32° (0°C) HCA: 1080 at 80°F (27°C) Capacity (at 10hr rate): 88.5Ah Reserve capacity: 195 minutes on 25amps Short circuit current: 2,900A Deep cycling capability: 400 at 80% DOD Dimensions: 14.84L x 6.88W x 7.48H BCI Group 49 Battery Weight: 60.4lbs Terminal: DIN Lead Post Internal Resisitance: 4.2 ohms Design life: 12 years Typical service life: 6 to 8 years 2 Batteries in 1 The Odyssey PC1350 battery combines in one box the characteristics of two separate batteries. It can deep cycle (be recharged) as well as provide enormous cranking power. Military Grade Only Hawker Odyssey batteries are based on the same battery technology offered by Hawker to the military for aircraft and tank batteries. Odyssey batteries are of military grade and have endured rigorous tests that demonstrate their overall ruggedness and exceptional tolerance of mechanical abuse. Superior cranking and fast charge capability The 5 second cranking power of Odyssey batteries is double to triple that of equally sized conventional batteries, even when the temperature is as low as - 40° C. Also, with simple constant voltage charging (alternator or independent charger), there is no limitation on the inrush current, so the user is assured of a fast charge.
(Learn More)
BM Part #:
12061

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amps
  • Warranty: 1 Year
12 Volt - 6 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Golf caddies and scooters among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: Includes clamps, approximately 5ft cord length OUTPUT: 12 Volt Nominal; 6 Amp DC Set Voltage (cut-off Voltage): 14.3v +/- 0.1 Float Voltage (come-on Voltage):13.7 +/-0.1 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
24031

Quantity
Price: 59.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 3 Amps
  • Warranty: 1 Year
24 Volt - 3 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial Battery maintenance, OEM applications such as Wheelchairs and Scooters among many other things. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 24 Volt Nominal; 3 Amp DC Set Voltage (cut-off Voltage): 28.6 +/- 0.2 Float Voltage (come-on Voltage):27.2 +/- 0.2 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
24054

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
24 Volt - 5 Amp: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty
(Learn More)
BM Part #:
24054-XLR

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
With 3 Pin XLR Connector for mobility scooters and wheelchairs 24 VOLT - 5 AMP: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty XLR Connector:
(Learn More)
BM Part #:
4807SR

Quantity
Price: 87.95
  • Voltage: 48 Volt
  • Capacity (Amp Hours): 3 Amp
  • Warranty: 1 Year
The 48 Volt, 3 Amp Battery Defender charger is a fully automatic charger appropriate for keeping any of your 48 volt lead acid battery systems charged, maintained, and ready for action. This double-insulated charger with its 4-stage charging process (explained further below) features a battery desulphating mode, constant current, constant voltage, and float voltage. The 100-240 VAC input makes it suitable for anywhere in the world. Summary 48 volt, 3 amp constant current -- equivalent to a 6A tapered charger in charging time. Universal input: 100VAC to 240VAC - suitable anywhere in the world. Automatic cut-off and then true Float mode. Battery Defender can be left connected indefinitely without harming your battery. Battery desulphation: Preventative and reactive care for the leading cause of battery failture. UL, CSA, TUV listed and meets EMC standards. Our Battery Defender has been through rigorous nationally-recognized testing certifications for electrical safety. Compatible with on-board (internal) applications. Compact and light-weight. The 4-Stage Battery Defender Charging Process Stage 1: Deep Discharge Charging Pulse Mode: LED Flash The Battery Defender starts charging at 0.5 volts and gives pulse current up to 5 volts. This removes recently formed sulphation during battery's in a deep state of discharge. Stage 2: Contstant Current Mode (CC): LED Orange The Battery Defender changes a constant current of 3 amps. When the battery's voltage reaches cut-off voltage, the charging state changes from CC (Constant Current) to CV (Constant Voltage) mode. Stage 3: Constant Voltage Mode (CV): LED Orange During this stage, each battery cell's voltage is equalized. The Battery Defender holds the battery at cut-off voltage and the current slowly reduces. When the current reaches 0.3CC (Constant Current), this point is called the "Switching Point." This Switching Point is one of the greatest features of the Battery Defender. Here, it can adjust current automatically according to the battery's capacity. This feature makes the Battery Defender unique compared to other chargers Stage 4: Standby Voltage Mode: LED Green The Battery Defender maintains the battery voltage at float voltage and current slowly reduces to the discharge current of the battery (almost zero). The Battery Defender can be left connected indefinitely without harming the battery. If the battery voltage goes below 54V, the charger changes from any mode to Constant Current mode (Stage 2) and restarts charging. The charging cycle will go through Stage 2 to Stage 4.
(Learn More)
BM Part #:
OPT-D750U

Quantity
Price: 199.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 750 CCA
  • Capacity (Amp Hours): 55 Ah
  • Warranty: 1 - 3 Year
750 CCA Optima Yellow Top Battery Model D34/78Optima Yellow Top Batteries are designed to take abuse. Optima's patented SPIRALCELL® Technology offers 15 times more vibration resistance and twice the life of an ordinary battery.Optima Yellow Top Batteries are Dual Purpose Starting and Deep Cycle Batteries. Optima Yellow Top Batteries hold a high voltage longer into their discharge cycle, providing a cleaner, higher voltage to keep your electronics running longer.Optima Yellow Top Batteries are perfect for running all your extra accessories, like running lights, high-performance audio and visual equipment, winches, or hydraulics.Optima Yellow Top Batteries are ideal for applications that only require seasonal use. Fully charged, this Optima Yellow Top Battery can sit unused for up to 12 months at or below room temperature, and still deliver the starting power you need.The SPIRALCELL® Technology and Sealed Case make this battery completely spill proof, preventing external gassing and leaking which may damage engine components and limit battery performance. Performance Voltage 12 Volt Cold Cranking Amps @ 0F 750 Cranking Amps @ 32F 870 Reserve Capacity 120 minutes Capacity 55 Ah Internal Resistance 0.0028 ohms Physical Specs Length 10" Width 6 7/8" Height 7 13/16" Battery Weight 43.5 lbs Type Post/Terminal Dual SAE and GM BCI Group 34/78 Warranty Personal Use: 36 months replacement Commercial Use: 12 months replacement Click to download PDF
(Learn More)
BM Part #:
ACC-INC-812A

12 Volt, 2/12 Amp Automatic Eight Battery Charging Station Free Ground Shipping!

BACKORDERED
AVAILABLE May 1, 2014
Quantity
Price: 738.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2 / 12 Amp
  • Warranty: 1 Year Factory Direct
Industrial Series Battery Charger - Model INC-812A DIGITAL - Automatically selects 2 to 12 amps charging current. Charges up to eight batteries at once. Eight completely independent, fully automatic, microprocessor controlled charging banks - charge 8 different size batteries at the same time Charger automatically selects from 2 to 12 amps output per bank Eight detachable 6 foot cables with 75 amp, color-coded clamps Separate digital display for each bank Separate standard and gel settings to assure a complete charge Multi-stage charging algorithm Safe-start, reverse polarity and short circuit protection - the charger will not apply current to the battery clamps until they are properly connected Overcharge protection - the charger will not over charge the battery Patent pending "thermal runaway" protection Fan-cooled for dependability and peak performance Heavy duty steel case for durability Charges 12 volt lead-acid, deep cycle, AGM and gel cell batteries UL/CUL approved Specifications: Charger Type: Fully Automatic Microprocessor Controlled Output Voltage: 12VDC Input Voltage: 120VAC Output Current Cont: 2A-12A / 6A Accessory: 8 Detachable Battery Clamps Unit Height: 11.87 Unit Width: 19.00 Unit Depth: 11.68 Unit Weight: 28.70 Rating Agency: UL Input Current Cont: 6.0A-20.0A / 11.0A
(Learn More)
1 2 3 of 4 next
SearchSpring