Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Spx Volt Charging Stations

Showing 1 - 24 of 796 items Search Results for "spx volt charging stations"

1 2 3 of 34 next

Sort By:

BM Part #:
021-0146-4

Quantity
Price: 459.95
  • Voltage: 12 Volt
  • Warranty: 3 Year Factory Direct
This item is Built-To-Order. Once this item is ordered, it cannot be canceled, returned, or exchanged. Please confirm that you need a 240 Volt unit before ordering. Safe, No Spark Charging! Deltran's advanced SuperSmart Battery Tender Battery Management System is light years ahead of any standard battery charger. It's the first fully automatic, constant-current battery charger designed to charge and/ or maintain up to 5 12-volt batteries simultaneously @ 2 amps.This Multiple Charging Station Shop Charger uses 5 independent Battery Tender Plus battery charger circuits in a single enclosure. Each circuit is a linear power converter that has a true DC output at a maximum power level of approximately 29 watts. It has a maximum output charging current of 2.0 amps. This is a higher current output than the stand-alone Battery Tender Plus battery charger circuits because each shop charger has an internal fan to provide forced air cooling of all active, semiconductor components.Includes 5 six foot Clamp HarnessesWill correctly charge and maintain any type of lead acid battery - AGM (absorbed glass mat), sealed calcium or Gel batteriesTo avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to batterySimultaneously charges and/ or maintains up to 5 batteries or any combination from 1 to 5Maintains batteries at full chargeTemperature compensated to ensure optimum charge voltage according to ambient temperatureAutomatically switches from full charge to float charging mode. Reverse Polarity Protection to ensure no charger or battery damageComplete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode).BTP microchip technology virtually eliminates battery destroying sulfation Built in 72 hour timer will protect a marginal battery from over charging2 amps per output charging currentInput Power: 240 VAC @ 50HzTemperature Range: -20F to 120F Technical Specs: (Adobe PDF) (Microsoft Word)
(Learn More)
BM Part #:
CUSTOM-68

Quantity
Price: 53.95
  • Voltage: 9.6 Volt
  • Capacity (Amp Hours): 1200 mAh
  • Warranty: 1 Year
This battery is a replacement for:Harding Energy: ASXOTCO08 Genisys OTC SPX vehicle scannerHarding Energy: SPX/OTC PART # 239180 REV. A OTC 239180This replacement battery is 100% compatible with the SPX P/N 239180 for Matco Determinator and all compatible models. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% Quality Control Assurance.This replacement battery includes a 1 Year Warranty to guarantee that it has no manufacturing defects.
(Learn More)
BM Part #:
021-0133

Quantity
Price: 398.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2 Amps
  • Warranty: 3 Year Factory Direct
Safe, No Spark Charging! Deltran's advanced SuperSmart Battery Tender Battery Management System is light years ahead of any standard battery charger. It's the first fully automatic, constant-current battery charger designed to charge and/ or maintain up to 5 12-volt batteries simultaneously @ 2 amps.This Multiple Charging Station Shop Charger uses 5 independent Battery Tender Plus battery charger circuits in a single enclosure. Each circuit is a linear power converter that has a true DC output at a maximum power level of approximately 29 watts. It has a maximum output charging current of 2.0 amps. This is a higher current output than the stand-alone Battery Tender Plus battery charger circuits because each shop charger has an internal fan to provide forced air cooling of all active, semiconductor components.Includes 5 six foot Clamp HarnessesWill correctly charge and maintain any type of lead acid battery - AGM (absorbed glass mat), sealed calcium or Gel batteriesTo avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to batterySimultaneously charges and/ or maintains up to 5 batteries or any combination from 1 to 5Maintains batteries at full chargeTemperature compensated to ensure optimum charge voltage according to ambient temperatureAutomatically switches from full charge to float charging mode. Reverse Polarity Protection to ensure no charger or battery damageComplete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode).BTP microchip technology virtually eliminates battery destroying sulfation Built in 72 hour timer will protect a marginal battery from over charging2 amps per output charging currentInput Power: 115VAC @ 60HzTemperature Range: -20F to 120F Technical Specs: (Adobe PDF) (Microsoft Word)
(Learn More)
BM Part #:
021-0134

Quantity
Price: 539.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2 Amps
  • Warranty: 3 Year Factory Direct
Safe, No Spark Charging! Deltran's advanced SuperSmart Battery Tender Battery Management System is light years ahead of any standard battery charger. It's the first fully automatic, constant-current battery charger designed to charge and/ or maintain up to 10 12-volt batteries simultaneously @ 2 amps.This Multiple Charging Station Shop Charger uses 10 independent Battery Tender Plus battery charger circuits in a single enclosure. Each circuit is a linear power converter that has a true DC output at a maximum power level of approximately 29 watts. It has a maximum output charging current of 2.0 amps. This is a higher current output than the stand-alone Battery Tender Plus battery charger circuits because each shop charger has an internal fan to provide forced air cooling of all active, semiconductor components.Includes 10 six foot Clamp HarnessesWill correctly charge and maintain any type of lead acid battery - AGM (absorbed glass mat), sealed calcium or Gel batteriesTo avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to batterySimultaneously charges and/ or maintains up to 10 batteries or any combination from 1 to 10Maintains batteries at full chargeTemperature compensated to ensure optimum charge voltage according to ambient temperatureAutomatically switches from full charge to float charging modeReverse Polarity Protection to ensure user safetyComplete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode)BTP microchip technology virtually eliminates battery destroying sulfationBuilt in 72 hour timer will protect a marginal battery from over charging2 amps per output charging currentInput Power: 115VAC @ 60HzTemperature Range: -20F to 120FTechnical Specs: (Adobe PDF)
(Learn More)
BM Part #:
021-0147-4

Battery Tender 12 Volt 2 Amp Battery Charger - 10 Banks 240 Volt AC Free Ground Shipping!
Made to Order - Ships in 7-10 Days
Quantity
Price: 584.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2 Amps
  • Warranty: 3 Years Factory Direct
    (Returned units for repair may take 7 to 10 days for turn around time)
This item is Built-To-Order. Once this item is ordered, it cannot be canceled, returned, or exchanged. Please confirm that you need a 240 Volt unit before ordering. **No AC Plug Included with Charger** **Customer Must Supply Correct AC Plug & Install** Please see below. Safe, No Spark Charging! Deltran's advanced SuperSmart Battery Tender Battery Management System is light years ahead of any standard battery charger. It's the first fully automatic, constant-current battery charger designed to charge and/ or maintain up to 10 12-volt batteries simultaneously @ 2 amps.This Multiple Charging Station Shop Charger uses 10 independent Battery Tender Plus battery charger circuits in a single enclosure. Each circuit is a linear power converter that has a true DC output at a maximum power level of approximately 29 watts. It has a maximum output charging current of 2.0 amps. This is a higher current output than the stand-alone Battery Tender Plus battery charger circuits because each shop charger has an internal fan to provide forced air cooling of all active, semiconductor components.Includes 10 six foot Clamp HarnessesWill correctly charge and maintain any type of lead acid battery - AGM (absorbed glass mat), sealed calcium or Gel batteriesTo avoid dangerous dead-short sparking, microchip circuitry will not activate output voltage until clips are correctly connected to batterySimultaneously charges and/ or maintains up to 10 batteries or any combination from 1 to 10Maintains batteries at full chargeTemperature compensated to ensure optimum charge voltage according to ambient temperatureAutomatically switches from full charge to float charging modeReverse Polarity Protection to ensure user safetyComplete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode)BTP microchip technology virtually eliminates battery destroying sulfationBuilt in 72 hour timer will protect a marginal battery from over charging2 amps per output charging currentInput Power: 240 VAC @ 50HzTemperature Range: -20F to 120FTechnical Specs: (Adobe PDF) AC Plug not included. Customer must supply IEC Cord (Specification IEC 60320, C13 Line Socket): Device supplied with C14 chassis plug (inlet):
(Learn More)
BM Part #:
022-0148-DL-WH

Quantity
Price: 174.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amps
  • Warranty: 2 Year Factory Direct
The 4 Bank International Battery Tender Charging Station! Operates Anywhere in the World!The 4 Bank Battery Tender Charging Station is four encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. This charger will operate anywhere in the world!Includes four Clamp Harness and four Lug Harness48" Charging Leads supplied with unit (4 leads)4 independent charging stations12 volts @ 1.25 amps per stationExtremely lightweight Less than 3 lbsOperates anywhere in the world! 100-240 VAC 50/60 HzTemperature Range: -20F to 120FOptional 25 ft leads availableMicroprocessor controlled constant current chargingReverse Polarity ProtectedSpark ProofPerfect for all AGM (absorbed glass matte), sealed maintenance free and flooded batteriesWill comply to all International safety standards (UL/CSA/CE)Technical Specs: (Adobe PDF)
(Learn More)
BM Part #:
SC5A

Quantity
Price: 52.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amp
  • Warranty: 1 Year
12V Switching Power, Digital Processing, Battery Charger and Maintainer For 12 Volt SLI/VRLA/GEL/AGM, CAL/CAL and SPIRAL Batteries. Package Includes: SC5A Charger with 6' AC Cord and 5' DC quick-connect. Ring Terminals, 1' in cord length Clamps, 1' in cord length Instruction Manual Features: Uses two LEDs: Green and Red IP65 Water Resistant: Dust/Splash/Rain protection. Microprocessor controlled 5-stage charging. Switches to float mode automatically (Speed charger). Charge and maintain batteries simultaneously. Auto-polarity, spark free and over-charging protection. Optimizes battery performance and longevity. Five Stage Charging: Desulfation:Save a deeply discharged or a light sulfated battery for recovery. Fast Charge:Charge battery to 75% in the fastest and most efficient manner. Equalization:When the battery reaches 75% charge, the charger starts a charge pulse with a smaller stream current to fully charge in a safe manner. Top-Off:Fully charge the battery without overcharging the battery. Maintenance:Maintain the battery in full-charge status.
(Learn More)
BM Part #:
ACC-SSC-1500A-CA

Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15/8/3 Amp
  • Warranty: 5 Year Factory Direct
This 12 Volt charger is ideal for charging deep-cycle, gel cell, AGM, and regular automotive lead-acid batteries. Formally the SSC-1500A. This charger now meets CA energy efficiency regulations. 15 Amp Fast Charge/8 Amp Fast Charge: Charger monitors battery condition and adjusts charge rate to prevent battery damage; for car, truck, marine, RV, farm equipment, AGM, gel cell, and deep-cycle batteries. 3 Amp Slow Charge: For charging small batteries and maintaining large ones; charges motorcycle, ATV, snowmobile, and lawn tractor batteries. Microprocessor Controlled: for precise monitoring and charging. Multi-Stage Automatic Charging: Includes constant current for greater efficiency and less heat. Float-Mode Monitoring: helps maintain battery. Battery Test: Diagnose battery condition and measures battery voltage. Desulphation/Restore Mode: Prolongs battery life. Slim Profile: Makes storage and hanging easy. High-Impact Case: Rust-proof and corrosion resistant. Electronic Push-Button Controls: Easy-to-feel switches for selection of Display Mode, Charge Rate, or Battery Type: choose from regular automotive (low maintenance or maintenance free), deep cycle, AGM, or gel cell batteries. Easy-To-Read Digital Display: Indicates battery charge status and test results. 50 Amp Clamps: For top and side-mounted battery posts. 6-ft. Power and Output Cords: Combine for a 12-ft reach. Retractable Handle & Self-Stored Cables: for compact storage and portability. Reverse-Hookup Protection: Checks the polarity of the connected battery and only stats charging if correctly connected. AC Power Compensation: Works even if the electric power from the AC outlet is below normal. Short Circuit Protection: For safe charging.
(Learn More)
BM Part #:
CHG-HIT

Quantity
Price: 82.95
  • Voltage: 7.2V - 18V
  • Warranty: 1 Year
Features: Compatible with many Hitachi power tools, 7.2 - 18 Volt. Can be used with NiCd, NiMH, and Li-Ion batteries. 3-stage mode charging system: Pre-Charge, Constant Charge, Trickle Charge Multi-voltage power tool charger for Hitachi power tools. For 7.2 Volt to 18 Volt batteries, and compatible with NiCd, NiMH, and Li-Ion batteries. This power tool charger is designed with a 3 stage mode charging system: Pre-Charge, Constant Charge, Trickle Charge. It is equipped with a built-in circuit protection to prevent overcharging, short circuits, extended time charging, and will detect damaged or bad batteries. This charge also features a fast charge Output DC 1.5a.
(Learn More)
BM Part #:
022-0165-DL-WH

Quantity
Price: 89.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amp
  • Warranty: 2 Year (Handled
    Directly Through Deltran)
Operates anywhere in the world! 100-240VAC, 50/60Hz. The 2 Bank Battery Tender Charging Station contains two encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.
(Learn More)
BM Part #:
022-0185G-DL-UK

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amps
  • Warranty: 2 Year
The popular Battery Tender is now offered internationally! The world's most advanced battery charger switches automatically from charge to long term storage. The #1 Selling Charger in the U.S. Powersports Industry! Widely marketed throughout the U.S. by leading Sports Vehicle Manufacturer's & Distributors.Includes one Clamp Harness and one Lug HarnessIncludes Battery Tender CaseInternational Input Model (Worldwide Usage)Includes AC Plug for use in the UKVoltage Range 100-240 VAC 50/60 HzTemperature Range: -20F to 120F12 volts @ 1.25 ampsSwitchmode Design- Lightweight & compact (1 lb.) (,45 kg)4 step fully automatic charging (Initialization, Bulk, Absorption, Float/ Maintenance)Microprocessor Controlled Constant Current Charging! (Never shuts off while monitoring state of charge)Reverse Polarity ProtectionCharges as fast as a 3 amp taper charger!Perfect for all AGM (absorbed glass mat) gel, sealed maintenance free and flooded batteriesComplies to all International safety standards UL/CSA/CE2 year warrantyTechnical Specs:(Adobe PDF)
(Learn More)
BM Part #:
022-0185G-DL-EU

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amps
  • Warranty: 2 Year
The popular Battery Tender is now offered internationally! The world's most advanced battery charger switches automatically from charge to long term storage. The #1 Selling Charger in the U.S. Powersports Industry! Widely marketed throughout the U.S. by leading Sports Vehicle Manufacturer's & Distributors.Includes one Clamp Harness and one Lug HarnessIncludes Battery Tender CaseInternational Input Model (Worldwide Usage)Includes AC Plug for use in the EUVoltage Range 100-240 VAC 50/60 HzTemperature Range: -20F to 120F12 volts @ 1.25 ampsSwitchmode Design- Lightweight & compact (1 lb.) (,45 kg)4 step fully automatic charging (Initialization, Bulk, Absorption, Float/ Maintenance)Microprocessor Controlled Constant Current Charging! (Never shuts off while monitoring state of charge)Reverse Polarity ProtectionCharges as fast as a 3 amp taper charger!Perfect for all AGM (absorbed glass mat) gel, sealed maintenance free and flooded batteriesComplies to all International safety standards UL/CSA/CE2 year warrantyTechnical Specs:(Adobe PDF)
(Learn More)
BM Part #:
022-0185G-DL-AU

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amps
  • Warranty: 2 Year
The popular Battery Tender is now offered internationally! The world's most advanced battery charger switches automatically from charge to long term storage. The #1 Selling Charger in the U.S. Powersports Industry! Widely marketed throughout the U.S. by leading Sports Vehicle Manufacturer's & Distributors.Includes one Clamp Harness and one Lug HarnessIncludes Battery Tender CaseInternational Input Model (Worldwide Usage)Includes AC Plug for use in AUVoltage Range 100-240 VAC 50/60 HzTemperature Range: -20F to 120F12 volts @ 1.25 ampsSwitchmode Design- Lightweight & compact (1 lb.) (,45 kg)4 step fully automatic charging (Initialization, Bulk, Absorption, Float/ Maintenance)Microprocessor Controlled Constant Current Charging! (Never shuts off while monitoring state of charge)Reverse Polarity ProtectionCharges as fast as a 3 amp taper charger!Perfect for all AGM (absorbed glass mat) gel, sealed maintenance free and flooded batteriesComplies to all International safety standards UL/CSA/CE2 year warranty
(Learn More)
BM Part #:
24054

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
24 Volt - 5 Amp: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty
(Learn More)
BM Part #:
24054-XLR

Quantity
Price: 69.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 1 Year
With 3 Pin XLR Connector for mobility scooters and wheelchairs 24 VOLT - 5 AMP: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. Selectable charge mode: A switch permits the user to select the type of charge required for either Gel or Wet Lead-acid. These voltage settings are identified above in the output ratings. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to +100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 25 Volt Nominal; 5 Amp DC Set Voltage: Gel: 28.6 +/- 0.2 WET LEAD ACID: 29.9 +/-0.2 Float Voltage: 27.2 +/- 0.2 28.8 +/-0.2 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6" wide x 11" high x 4" deep 15cm x 27.5cm x 10cm deep WEIGHT: 9 lbs.; 4.09kg 1 Year Warranty XLR Connector:
(Learn More)
BM Part #:
12061

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amps
  • Warranty: 1 Year
12 Volt - 6 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Golf caddies and scooters among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: Includes clamps, approximately 5ft cord length OUTPUT: 12 Volt Nominal; 6 Amp DC Set Voltage (cut-off Voltage): 14.3v +/- 0.1 Float Voltage (come-on Voltage):13.7 +/-0.1 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
24031

Quantity
Price: 59.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 3 Amps
  • Warranty: 1 Year
24 Volt - 3 Amp: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial Battery maintenance, OEM applications such as Wheelchairs and Scooters among many other things. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all commonly available Lead Acid batteries with ratings from 20 to 100 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. DO NOT USE WITH AVIATION BATTERIES Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any battery discharged down to 10 Volts. Even a totally discharged battery will recover to 20 Volts in 10 to 60 minutes, when the load is removed. No Risk of Shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Specs: OUTPUT: 24 Volt Nominal; 3 Amp DC Set Voltage (cut-off Voltage): 28.6 +/- 0.2 Float Voltage (come-on Voltage):27.2 +/- 0.2 INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 7" wide x 6" high x 3" deep 17.5cm x 15cm x 7.5cm deep WEIGHT: 5 lbs.; 2.27kg 1 Year Warranty
(Learn More)
BM Part #:
1500

Quantity
Price: 49.99
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.5 Amp
  • Warranty: 5 Year Factory Direct
BatteryMINDer® 1500 by VDC is a SmarTECHnology(tm) plug 'n run 1.5 Amp battery charger/maintainer with full-time automatic pulse desulfator can help extend a battery's life up to 4 times its normal life. Ideal for charging, maintaining or recovering 12V flooded, sealed, maintenance-free, starter, deep-cycle, AGM and marine batteries. Automatic high-low temperature compensator is installed to ensure that batteries will never be overcharged or undercharged, regardless of the operating temperature. 0°F-130°F operating range. Unit can maintain up to 4 batteries at one time when connected in parallel. Has reverse polarity protection for safety. Input Voltage: 100-240 VAC 50/60 Hz 5 Year Factory Direct Warranty Voltage: 12 Volt Output: 1.5 Amp Includes clamps. If you need a lug harness (ring terminal), please see related items below Click to enlarge
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
LC1-12-1A

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1 Amp
  • Warranty: 1 Year
This battery charger, designed for sealed lead acid batteries, can protect and extend your battery's life. It is a three-step charging system: Contact Current, Constant Voltage, and Floating Charging. The charger features Over-current protection, short-circuit protection, reverse polarity protection, and includes an LED indicator for charging and full-charging modes. This charger is for 12 Volt batteries. It is best if used with 3.3 to 10Ah batteries. Features: Alligator clips Over-voltage protection Over-current protection Reverse connection protection Full automatic charge
(Learn More)
BM Part #:
LC1-12-3A

Quantity
Price: 21.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 3 Amp
  • Warranty: 1 Year
This battery charger, designed for sealed lead acid batteries, can protect and extend your battery's life. It is a three-step charging system: Contact Current, Constant Voltage, and Floating Charging. The charger features Over-current protection, short-circuit protection, reverse polarity protection, and includes an LED indicator for charging and full-charging modes. This charger is for 12 Volt batteries. It is best if used with 10Ah to 30Ah batteries. Features: Alligator clips Over-voltage protection Over-current protection Reverse connection protection Full automatic charge
(Learn More)
BM Part #:
1214CC

Quantity
Price: 64.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7 Amp
  • Warranty: 15 Year Limited Warranty
This battery charger, designed for sealed lead acid batteries, can protect and extend your battery's life. It is a three-step charging system: Contact Current, Constant Voltage, and Floating Charging. The charger features Over-current protection, short-circuit protection, reverse polarity protection, and includes an LED indicator for charging and full-charging modes. This charger is for 12 Volt batteries. It is best if used with 40Ah to 70Ah batteries. Features: Alligator clips, trail connector, ring terminals Over-voltage protection Over-current protection Reverse connection protection Full automatic charge
(Learn More)
BM Part #:
XC120

Quantity
Price: 32.95
  • Voltage: 12 Volt
  • Warranty: 2 Year
This uniquely shaped power inverter can power up to 4 devices at once with 3 USB ports for plug. With it's cup-like design, it fits securely in most cup holders, making it one of the most user-friendly power inverters you can buy. 12 Volt 130 Watt continuous / 260 watt peak. World's smallest cup Inverter: Unique cup design fits in most car cup holders. Modified Sine Wave Power Inverter 3x USB Connections Low voltage, Overload and temperature protection Noiseless technology (No Fan). 2.1A charging power: up to 4 times faster than standard USB charging. Patent pending design.
(Learn More)
BM Part #:
JAC0524-C

Quantity
Price: 97.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 5 Amp
  • Warranty: 1 Year
Aluminum-cased 24 Volt, 5 Amp Battery Charger with Clips This fully automatic charger confirms operation with three colored LED lights. Red indicates AC power is on, yellow shows the battery is charging, and green lets you know that charger has entered float mode. Worldwide Universal AC Input 90-260 volts, 50/60 Hz Charge control: Starts with a modified constant current charge, then to a constant finishing voltage, finishing with it's float standby mode. Current limiting. Fully Automatic: This charger can be left on the battery indefinitely without overcharging. For any type lead acid battery, including conventional, maintenance free, deep cycle, gelled-type, valve regulated batteries. Finishing voltage: 2.28 volts per cell float; 2.4 volts per cell finishing. May be preset to customers specification for battery type. Not intended for use as a DC power supply. Full load at 2.1 volts per cell continuous - 100% duty cycle. Short circuit proof. Reverse polarity protection (except 2 amp model).
(Learn More)
1 2 3 of 34 next
SearchSpring