Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Tanning Hides With Battery Acid

Showing 1 - 24 of 16010 items Search Results for "tanning hides with battery acid"

1 2 3 of 668 next

Sort By:

BM Part #:
BLM-SMALL

Quantity
Price: 25.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 240 CCA
  • Capacity (Amp Hours): 19 Ah
This battery includes the necessary acid pack. Due to regulations regarding shipping these batteries, it can only be shipped FedEx Ground. 12 Volt 19 Ah 240 CCA
(Learn More)
BM Part #:
DEK-00450

Quantity
Price: 3.95
Deka's USA-made spray cleans your battery by neutralizing acid and stopping corrosion. It penetrates and loosens corroded parts, helping to eliminate energy loss. Cleans battery and the area around the battery; washes off with water. Penetrates, loosens and neutralizes acid corrosion deposits. Sprays on yellow, and leaves pink foam to indicate where acid is present. Helps eliminate energy loss with regular maintenance.
(Learn More)
BM Part #:
SLA-12V10-HI

Quantity
Price: 39.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 9 Ah
  • Warranty: 1 Year
Built with Abosrbent Glass Mat sealed lead acid techonology that provides superior performance and allows safe operation in any position. The nut and bolt terminal configuration found in some "jump start" units and is also used as a starting battery in some generators. Connectors - B1 (0.22 inch bolt hole) Dimensions: 5.94" L x 2.56" W x 3.7" H Chemistry: Lead Acid Volts: 12 Capacity: 9 Ah
(Learn More)
BM Part #:
BATMAT-YEL

Quantity
Price: 4.95
This mat is also available in BLACK Stops leaking battery acid from destroying your car. The Battery Mat is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in ovens, and screen printed. World's Only Acid Neutralizing Mat / Acid Absorbing Mat Traps and Neutralizes Battery Acid Recyclable Protects the Environment Protects battery from harmful road vibration Easy to Install Completely Safe to Handle Before & During Installation Protects against Corrosion Ideal for placing under batteries in storage Used by all Branches of the U.S. Military Can be cut to fit your battery tray Installation instructions included Dimensions: Length: 8 inches Height: 12 inches Thickness (Width): 3/16 inches Made entirely in the USA
(Learn More)
BM Part #:
BATMAT-BLK

Quantity
Price: 4.95
This mat is also available in YELLOW Stops leaking battery acid from destroying your car. The Battery Mat is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in ovens, and screen printed. World's Only Acid Neutralizing Mat / Acid Absorbing Mat Traps and Neutralizes Battery Acid Recyclable Protects the Environment Protects battery from harmful road vibration Easy to Install Completely Safe to Handle Before & During Installation Protects against Corrosion Ideal for placing under batteries in storage Used by all Branches of the U.S. Military Can be cut to fit your battery tray Installation instructions included Dimensions: Length: 8 inches Height: 12 inches Thickness (Width): 3/16 inches Made entirely in the USA
(Learn More)
BM Part #:
BATMAT-8-20

Quantity
Price: 14.95
Dimensions: Length: 8 inches Height: 20 inches Thickness (Width): 6/16 inches Stops leaking battery acid from destroying your car. The Battery Mat is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in ovens, and screen printed. World's Only Acid Neutralizing Mat / Acid Absorbing Mat Traps and Neutralizes Battery Acid Recyclable Protects the Environment Protects battery from harmful road vibration Easy to Install Completely Safe to Handle Before & During Installation Protects against Corrosion Ideal for placing under batteries in storage Used by all Branches of the U.S. Military Can be cut to fit your battery tray Installation instructions included Made entirely in the USA
(Learn More)
BM Part #:
BATMAT-8-12

Quantity
Price: 8.95
Dimensions: Length: 8 inches Height: 12 inches Thickness (Width): 6/16 inches Stops leaking battery acid from destroying your car. The Battery Mat is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in ovens, and screen printed. World's Only Acid Neutralizing Mat / Acid Absorbing Mat Traps and Neutralizes Battery Acid Recyclable Protects the Environment Protects battery from harmful road vibration Easy to Install Completely Safe to Handle Before & During Installation Protects against Corrosion Ideal for placing under batteries in storage Used by all Branches of the U.S. Military Can be cut to fit your battery tray Installation instructions included Made entirely in the USA
(Learn More)
BM Part #:
BATMAT-12-20

Quantity
Price: 18.95
Dimensions: Length: 12 inches Height: 20 inches Thickness (Width): 6/16 inches Stops leaking battery acid from destroying your car. The Battery Mat is made of super absorbent polypropylene needle punch felt, with one side heat treated to give it additional strength. This fabric is slowly pressure-treated at high temperatures with a unique, all-natural, acid neutralizing formula, and then cured in ovens. Finally, the fabric is dipped in a latex sealant mixture, again in ovens, and screen printed. World's Only Acid Neutralizing Mat / Acid Absorbing Mat Traps and Neutralizes Battery Acid Recyclable Protects the Environment Protects battery from harmful road vibration Easy to Install Completely Safe to Handle Before & During Installation Protects against Corrosion Ideal for placing under batteries in storage Used by all Branches of the U.S. Military Can be cut to fit your battery tray Installation instructions included Made entirely in the USA
(Learn More)
BM Part #:
SLA-12V100HR

Quantity
Price: 184.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 103 Ah
  • Warranty: 1 Year

(Learn More)
BM Part #:
12N14-3A

Quantity
Price: 15.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 6 Month
This battery includes the necessary acid pack. Due to regulations regarding shipping these batteries, it can only be shipped FedEx Ground. 12 Volt 14 Ah 5 5/16"L x 3 1/2W" x 6 9/16H" Weight with acid: 10 lbs
(Learn More)
BM Part #:
YB14L-A2

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 6 Month
This battery includes the necessary acid pack. Due to regulations regarding shipping these batteries, it can only be shipped FedEx Ground. 12 Volt 14 Ah 5 5/16"L x 3 1/2"W x 6 9/16"H Weight with acid: 10 lbs
(Learn More)
BM Part #:
BLM-SMALL

Quantity
Price: 9.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 14 Ah
  • Warranty: 6 Month
This battery includes the necessary acid pack. Due to regulations regarding shipping these batteries, it can only be shipped FedEx Ground. 12 Volt 14 Ah 5 5/16"L x 3 1/2"W x 6 9/16"H Weight with acid: 10 lbs
(Learn More)
BM Part #:
6N4-2A-8

Quantity
Price: 12.95
  • Voltage: 6 Volt
  • Cold Cranking Amps (CCA): 24 CCA
  • Capacity (Amp Hours): 4 Ah
  • Warranty: 6 Months
6 Volts4 Amp Hour @10 hr rate0.4 Ah Charge Current24 CCAShips without acid which can be purchased at most large auto parts storesNew bolts includedComes with a two prong connectorNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
41A12500

Quantity
Price: 9.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 500 mA
Replacement Available:6/12 Volt 500 mA Sealed Lead Acid Battery Charger with Alligator Clips This charger with 6 volt and 12 volt switch is a 500 mili-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Includes charger cord with leadsCharger is for cycle applications and should not remain attached over 24 hours
(Learn More)
BM Part #:
4X0859-0012E

Quantity
Price: 144.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 8 Ah
  • Warranty: 1 Year
Assembled in the USA This is a Sealed Lead Acid rechargeable battery pack specifically designed to work in Energyline 5800, 5801, 5802, 5803 series switch controls. This ENERGY+ item is made with special Hawker brand extreme temperature sealed lead acid battery cells. This ENERGY+ item is built with the highest quality standards, safety features and has a 12 month warranty. Replaces: 591-000190-01
(Learn More)
BM Part #:
4X0859-0012W

Quantity
Price: 118.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 8 Ah
  • Warranty: 1 Year
Assembled in the USA This is a Sealed Lead Acid rechargeable battery pack specifically designed to work in Cooper Power Systems (McGraw Edison) (Kyle) Form 4, Form 4A, Form 4C, Form 4D, Form 5, Form 6 series power line reclosers. This ENERGY+ item is made with special Hawker brand extreme temperature sealed lead acid battery cells. This ENERGY+ item is built with the highest quality standards, safety features and has a 12 month warranty. Replaces: I04B25708, KME4-215, KME4215
(Learn More)
BM Part #:
LC1-12-1A

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1 Amp
  • Warranty: 1 Year
This battery charger, designed for sealed lead acid batteries, can protect and extend your battery's life. It is a three-step charging system: Contact Current, Constant Voltage, and Floating Charging. The charger features Over-current protection, short-circuit protection, reverse polarity protection, and includes an LED indicator for charging and full-charging modes. This charger is for 12 Volt batteries. It is best if used with 3.3 to 10Ah batteries. Features: Alligator clips Over-voltage protection Over-current protection Reverse connection protection Full automatic charge
(Learn More)
BM Part #:
LC1-12-3A

Quantity
Price: 21.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 3 Amp
  • Warranty: 1 Year
This battery charger, designed for sealed lead acid batteries, can protect and extend your battery's life. It is a three-step charging system: Contact Current, Constant Voltage, and Floating Charging. The charger features Over-current protection, short-circuit protection, reverse polarity protection, and includes an LED indicator for charging and full-charging modes. This charger is for 12 Volt batteries. It is best if used with 10Ah to 30Ah batteries. Features: Alligator clips Over-voltage protection Over-current protection Reverse connection protection Full automatic charge
(Learn More)
BM Part #:
6BC0500D-1-KT

Quantity
Price: 17.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 500 mA
Detachable 6 foot cord with Alligator Clips included. This charger is a 500 mili-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.
(Learn More)
BM Part #:
12BC0500D-1-KT

Quantity
Price: 17.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 500 mA
  • Warranty: 1 Year
Detachable 6 foot cord with Alligator Clips included. This charger is a 500 milliamp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.
(Learn More)
BM Part #:
4X0819-0012W

Quantity
Price: 83.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 2.5 Ah
  • Warranty: 1 Year
Assembled in the USA This ENERGY+ item is made with special Hawker brand extreme temperature sealed lead acid battery cells. This ENERGY+ item is built with the highest quality standards, safety features and has a 12 month warranty.
(Learn More)
BM Part #:
6-12BC0500S-1

Quantity
Price: 9.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 500 mA
  • Warranty: 1 Year
This charger with 6 volt and 12 volt switch is a 500 mili-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.
(Learn More)
BM Part #:
12BC1000D-1-KT

Quantity
Price: 13.95
  • Voltage: 12 Volt
  • Warranty: 1 Year
Detachable 6 foot cord with Alligator Clips included. This charger is a 1 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Requires any standard 115VAC in order to operate.
(Learn More)
BM Part #:
D1766

Quantity
Price: 1.95
This sealed lead acid battery charger cord is 6 feet long and includes alligator clips.
(Learn More)
1 2 3 of 668 next
SearchSpring