Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Toyota Solar

Showing 1 - 24 of 40 items Search Results for "toyota solar"

1 2 of 2 next

Sort By:

BM Part #:
021-1162

Quantity
Price: 19.95
  • Warranty: 3 Year Factory Direct
Not for use with the Battery Tender solar panels. A controller is built in to Battery Tender panels. Battery Tender Solar Controller allows you to convert an existing solar panel into a solar charger using Battery Tender patented Super Smart Charging Algorithm. Usable input range between 5-45 Watts! Product Features Convert any existing solar panel into a solar charger Battery Tender Solar Controller has a usable input range between 5-45 watts Fully automatic: Prevents your battery from either overcharging or undercharging Keeps the excess voltage from damaging the battery
(Learn More)
BM Part #:
OPT-46B24R

Quantity
Price: 176.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 450 CCA
  • Capacity (Amp Hours): 38 Ah
  • Warranty: 3 Year
Direct fit for 2004 and newer Toyota Prius with SmartKey System. New to BatteryMart.com, the Optima DS46B24R battery is one of the most-asked for and most-sought out batteries ever. This Optima battery for the Toyota Prius is a direct replacement for all models 2004 and up, and is the first Optima product to provide a direct fit for the Prius. You can purchase this battery assured that it will drop right into your car. OPTIMA vs Prius OE Ah (C/20 Rate) CCA Warranty Optima 38 450 3 years Large (SmartKey) OE Service 32 361 1 year Small (Non-SmartKey) OE Service 27 313 1 year Optima Difference +18% +24% +2 years The Optima DS46B24R integrates with the current Toyota OE vent system without any special installation. It is built to Optima's unbeatable standards, so you can expect to find Optima's world-class deep cycle dependability, vibration resistance 15 times above traditional batteries, and a long shelf life thanks to Optima's low-discharge rate. YellowTop Deep Cycle Battery by Optima Group Size S46B24R Crank Amps (CA): 575 Cold Crank Amps (CCA): 450 Amp Hour (Ah): 38 Reserve Capacity (RC): 66 Only for cars with the SmartKey system About Optima Yellowtop Batteries:Optima's YellowTop batteries are dual-purpose starting and deep-cycle batteries. They provide engine starting power plus deep cycle capacity to support multiple accessories, demanding electrical systems, and vehicles without alternators.
(Learn More)
BM Part #:
SLA-9A51P

AGM Toyota Prius Auxiliary Battery - Made in the USA Free Ground Shipping!

BACKORDERED
AVAILABLE April 17, 2014
Quantity
Price: 163.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 46 Ah / 325 CCA
  • Warranty: 1 Year
This S46B24R is made in the USA and it compatible with these Prius applications: 2004 - 2009 1.5L with Smart Key 2010 - 2011 1.8L Hybrid Battery Specifications: Replaces JIS part number S46B24R CCA: 325 Reserve Capacity: 60 Capacity: 46 Ah @ 20Hr
(Learn More)
BM Part #:
37002

20 Watt Crystaline Solar Panel Free Ground Shipping!
Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 20 Watts / 1.17 Amp
  • Warranty: 25 Year
The Panel in a Pithy Portion: A high performing 20 watt solar panel, with crystalline solar cells made to increase light absorption and improve efficiency. About the 20 Watt Solar Panel: This solar panel, manufactured lovingly by Sunforce, features high output and efficient crystalline solar cells. With assured maintenance free performance, this panel is perfect for all your 12 volt battery charging needs. Whether you are charging and maintaining the batteries of boats, trucks, RVs, tractors, cars and more (stopping just short of spacecraft), this panel will have your needs shining brightly as the energy it's capturing. As expected from any quality solar panel, it features a weatherproof design and is easy to install. The rugged aluminum frame and shatterproof tempered glass offer superior durability to persevere through harsh weather conditions. But, you still shouldn't hit it with a two-ton hammer or anything. It might still work, but it's still a dumb idea. Cool Features of This Voltaic Gadget High efficiency crystalline solar cells Ideal for charging 12 volt batteries of boats, trucks, tractors, RVs, cars and more Rugged aluminum frame for extended outdoor use Shatterproof tempered glass for superior durability Bypass diode minimizes power drop caused by shade Weatherproof Easy to install and maintenance free Maximum power output: 20 watts, 1.17 amps Recommended to use with a charge controller Includes supreme quality junction box 25 year limited warranty on 80% of power output.
(Learn More)
BM Part #:
ULGSOLAR

Quantity
Price: 19.95
  • Capacity (Amp Hours): 2100 mAh
  • Warranty: 1 Year
Solar Charger Solar Powered Charger Flexible charging power -use solar panel or batteries to charge: Charge 2 AA rechargeable batteries with solar panel, or through the USB port. Charge electronic devices through the USB port. Rugged, compact cover design for use indoors or out. Use clip hook for attaching to backpack or clothing, keeps batteries charged as you're hiking, walking, or doing any other outdoor activities. Kick-stand on back of charger allows solar panel to be angled in direct sunlight at different times of the day - will even charger through a window! LED indicator light illuminates to show charging direction- LED glows green when IN/OUT switch set to "IN", batteries receiving power from solar panel or USB port. LED glows red when IN/OUT switch set to "OUT", electronic device receiving power from fully charged batteries, solar panel turns off. Packaged in eco-friendly materials, including post-consumer recycled cardboard and recyclable PET plastic. Includes: 2 AA UltraLast Green Everyday Rechargeable batteries Interchangeable USB cable USB, mini-USB, and micro-USB connectors
(Learn More)
BM Part #:
50102

Quantity
Price: 24.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2.5 Watt
  • Warranty: 1 Year
Using the power of the sun, the portable Sunforce 2.5 Watt Solar Battery Maintainer offers an ideal way to maintain the 12 Volt batteries of automobiles, boats, tractors and more! Product Features: Made of durable ABS plastic and amorphous solar cells Excellent for maintaining the batteries of cars, boats, SUVs, tractors and more Amorphous solar panel works in all daylight conditions, even on cloudy days! Maintenance free and easy to install Completely weatherproof for added durability Plugs into cigarette lighter with included 12V DC plug Mounts on windshield with included suction cups Temperature Range: -40° to 176° F Maximum power output 2.5 Watts 167 mAh Includes: Alligator battery clamps 12V DC plug Wiring connected to the solar panel Suction cups to mount panel onto windshield
(Learn More)
BM Part #:
021-1163

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 270 mA
  • Warranty: 5 Year Factory Direct
Harness the power of the sun!This Battery Tender product by Deltran is a 5-watt solar panel with built-in smart charging controller. This panel provides 100% portable battery charging and maintenance. Perfect when you lack traditional power access. Battery Tender solar panels are the only panels available with a built-in charge controller to prevent overcharging! Product Specifications: Amazingly simple DIY installation 13.25" X 16" X 0.875" 3 lbs Built-in 3-step microcontroller for precise charging 12 V Nominal Voltage 270 mAmps Temperature Compensation Sensor Reverse polarity protected Sparkproof, waterproof: Excellent option for outdoor installations 5 Year Factory Direct Warranty (covers manufacturer defects only, not breakage)
(Learn More)
BM Part #:
021-1164

Quantity
Price: 85.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 540 mAmps
  • Warranty: 5 Year Factory Direct
Harness the power of the sun!This Battery Tender product by Deltran is a 10-watt solar panel with built-in smart charging controller. This panel provides 100% portable battery charging and maintenance. Perfect when you lack traditional power access. Battery Tender solar panels are the only panels available with a built-in charge controller to prevent overcharging! Product Specifications: Amazing simple DIY installation 26" X 16" X 0.875" 5.5 lbs Built-in 3-step micro-controller for precise charging 12 V Nominal Voltage 540 mAmps Temperature Compensation Sensor Reverse polarity protected Sparkproof, waterproof: Excellent option for outdoor installations 5 Year Factory Direct Warranty (covers manufacturer defects only, not breakage)
(Learn More)
BM Part #:
021-1165

Quantity
Price: 118.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 830 mAmps
  • Warranty: 5 Year Factory Direct
Harness the power of the sun!This Battery Tender product by Deltran is a 15-watt solar panel with built-in smart charging controller. This panel provides 100% portable battery charging and maintenance. Perfect when you lack traditional power access. Battery Tender solar panels are the only panels available with a built-in charge controller to prevent overcharging! Product Specifications: Amazing simple DIY installation 38" x 16" x 0.875" 8 lbs Built-in 3-step micro-controller for precise charging 12 V Nominal Voltage 830 mAmps Temperature Compensation Sensor Reverse polarity protected Sparkproof, waterproof: Excellent option for outdoor installations 5 Year Factory Direct Warranty (covers manufacturer defects only, not breakage)
(Learn More)
BM Part #:
60012

Quantity
Price: 19.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 7000 mAh
  • Warranty: 1 Year
Prevents overcharging 12V batteries! What is a charge controller? A charge controller is a very important feature of a solar system and must be used on all systems over 15 Watts. A charge controller protects your batteries from overcharge and discharge. Charge controllers are the maintenance free protection of your solar panel and batteries. Connecting a solar panel to a battery without a regulator seriously risks damaging the battery and potentially causing a safety concern. 7 Amp Solar Charge Controller: Maintain 12V batteries in a fully charged state Specifications Cut-in Voltage: 13 Volts Cut-Out Voltage: 14.2 Volts Max. Load: 105 Watts/ 7 Amps Product Features: Protects battery from overcharge and discharge For use with 12 Volt solar panels and batteries only Handles up to 7 amps of array current Handles up to 105 watts of solar power Maintains 12V batteries in a fully charged state Operation: Yellow charging light indicates battery charging Green light indicates fully charged battery Installation: Attach the charge controller positive(+) wire to the positive (+) battery terminal Attach the charge controller negative (-) wire to the negative (-) battery terminal Product Dimensions: (L x W x H): 4" x 2.85" x 1" Retail Box Dimensions: (L x W x H): 7 5/8" x 4 5/8" x 2 1/4" Installation Connect to Battery: Attach the Solar Charge Controller positive (+) wire to the positive (+) battery terminal. Then connect the Solar Charge Controller negative (-) wire to the negative (-) battery terminal. WARNING: The alligator clips MUST be placed on to the battery in the aforementioned order- wrong connections may cause sparking or explosion. Connect to Solar Panel: Option 1 Strip the solar panel wires. Connect positive (+) wire from the solar panel to the positive (+) of the charge controller and the negative (-) wire from the solar panel to the negative (-) of the charge controller. Ensure the connections are secure. Option 2 Some panels may include a quick connect for use with the Solar Charge Controller. If included, connect positive to positive and negative to negative of charge controller. Ensure connections are secure. Operation: The Green "Charged" light indicates a full-charged battery. When the battery reaches 14.2 V, the Solar Charge Controller will cut out voltage thereby ensuring no overcharging. The yellow "Charging" light indicates a battery that is being charged. When the battery reaches 13 V, the Battery Charge Controller will cut-in and begin charging. NOTES: The Solar Charge Controller should be placed within 5 feet of the battery in a dry well ventilated area. This Solar Charge Controller can support up to 105 watts of solar power. It is not advisable to use with greater wattage. All connections should be in parallel to ensure a 12 Volt system. It is normal for both lights to flicker on and off during normal operation. The Battery Charge Controller should be placed within 5' of the battery in a dry, well-ventilated area. This Battery Charge Controller can support up to 105 W and up to 7 A of array current. All connections should be parallel to ensure 12 V system (positive to positive and negative to negative). FAQ How many panels can I connect to my 7 Amp Solar Charge Controller? You can connect up to 105 Watts of Solar Power to the 7 Amp Solar Charge Controller. Panels should be connected in parallel - positive to positive, negative to negative. When will the Charged Indication light (green) light up? The charged indication green light will light up when the battery voltage reaches 14.2 Volts and the SCC will prevent the solar panels from overcharging the battery. It is normal for the SCC LED to light on and off as the battery voltage cuts in and out. GENERAL TESTING PROTOCOL Always test outdoors under optimal sunlight Test Solar Panel for Voltage Connect Voltmeter to the panel separately from the charge controller and observe Open Voltage. Open Voltage can range from 16 Volts to 24 Volts. Test Connection to Charge Controller for Voltage. Reconnect solar panel, and connect to charge controller as per instructions. Measure the Open Circuit Voltage at the battery side of the charge controller. Open circuit voltage should read 5-10% lower than without charge controller. Open circuit measurement will read between 15 and 23.5. Connect charge controller to battery First, disconnect solar panels and connect charge controller to battery. Always connect charge controller to battery first and remove last. Observe polarity - positive to positive and negative to negative. Reconnect Solar Panels to Charge Controller If battery voltage is 14.2 or higher, the GREEN light should be on. If battery voltage is between 13 and 14.2, the YELLOW LED should be on. If battery voltage is 13 or lower, the YELLOW LED should be on. If all testing results within the above indicated ranges, solar system is in acceptable range. If Voltage readings indicate lower ranges, repeat above connections and retest. Finally, it is common to have 12V Battery issues such as dead cells or non-rechargeable battery problems.
(Learn More)
BM Part #:
800310-001

Quantity
Price: 29.95
  • Warranty: 1 Year
This regulator for Quick Cable solar panels is designed to prevent overcharging and reverse polarity issues. 7A Charge Regulator Product Features: Exceptional Reliability Plug-N-Play Easy to use Handles up to 100 Watts of power Built-in Mode Indicators LED Charge Indicators Green: High Voltage (Over Charge Protection) - When activated, "High Voltage" indicator will go on and charge regulator will shut off power input from solar panel to battery. Disconnect Solar panel from the charge regulator. Yellow: Charging Low Voltage (Over Discharge Protection) - When activated, "Low Voltage: indicator will go on and charge regulator will shut off power output to prevent damage to the battery. In such case, discontinue using any application. Weather proof 1 Year Warranty Product Specifications: Rated Power: 100 Watts Operating Current: 7 Amps System Voltage: 12 V Warranty: 1 Year Dimensions: 3.7" x 2.7" x 1" Weight: 0.5 lb
(Learn More)
BM Part #:
50101

Quantity
Price: 22.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.5 Watt
  • Warranty: 1 Year
The Sunforce 1.5 Watt Power Sports Charger gives you another reason to love the sun! Designed to help charge 12 Volt batteries of ATVs, personal water crafts, cars, motorcycles, and much more, this unit is completely maintenance free and easy to install! Features: Helps charge 12V batteries with the power of the sun Made of durable ABS plastic and amorphous solar cells Works with motorcycles, personal water crafts, ATVs, snowmobiles, tractors and more! Completely weatherproof for added durability Amorphous solar panel works in all daylight conditions, even on cloudy days! Maintenance free and easy installation Built-in overcharge/discharge protection Easy connection to battery Maximum power output: 1.5 Watt Includes: 8Ft wire connected to solar panel 8Ft of extra wire Battery Clamps O Ring Connector and fuse Quick Connect Technology
(Learn More)
BM Part #:
ACC-BSP-10-12

10 Watt Flat Solar Panel Free Ground Shipping!
Quantity
Price: 127.95
  • Warranty: 10 Year Factory Direct
Our line of rugged outdoor solar panels come complete with a built-in blocking diode and a ten foot UV resistant output cable with bare wire leads.The annodized aluminum frame provides for easy mounting to the optional mounting brackets and also offer full protection for years of continued charging.Typical Electrical CharacteristicsMaximum Power (Pmax): 10WVoltage at Pmax (Vmp): 17.3VCurrent at Pmax (Imp): 0.58AShort-circuit current (Isc): 0.66AOpen-circuit voltage (Voc): 21.3V
(Learn More)
BM Part #:
ACC-BSP-10-12LSS

10 Watt Lite Flat Solar Panel Free Ground Shipping!
Quantity
Price: 120.95
  • Warranty: 2 Year Factory Direct
Our line of rugged outdoor solar panels come complete with a built-in blocking diode and a ten foot UV resistant output cable with bare wire leads.The cell strings are laminated between sheets of ethylene vinyl acetate (EVA) with stainless steel substrate.Typical Electrical CharacteristicsMaximum Power (Pmax): 10WVoltage at Pmax (Vmp): 17.3VCurrent at Pmax (Imp): 0.58AShort-circuit current (Isc): 0.66AOpen-circuit voltage (Voc): 21.3V
(Learn More)
BM Part #:
ACC-BSP-20-12

20 Watt Flat Solar Panel Free Ground Shipping!

BACKORDERED
AVAILABLE May 21, 2014
Quantity
Price: 199.95
  • Warranty: 10 Year Factory Direct
Our line of rugged outdoor solar panels come complete with a built-in blocking diode and a ten foot UV resistant output cable with bare wire leads.The cell strings are laminated between sheets of ethylene vinyl acetate (EVA) with stainless steel substrate.Typical Electrical CharacteristicsMaximum Power (Pmax): 20WVoltage at Pmax (Vmp): 17.3VCurrent at Pmax (Imp): 1.20AShort-circuit current (Isc): 1.30AOpen-circuit voltage (Voc): 21.7V
(Learn More)
BM Part #:
ACC-BSP-5-12

Quantity
Price: 74.95
  • Warranty: 10 Year Factory Direct
Our line of rugged outdoor solar panels come complete with a built-in blocking diode and a ten foot UV resistant output cable with bare wire leads.The cell strings are laminated between sheets of ethylene vinyl acetate (EVA) with stainless steel substrate.Typical Electrical CharacteristicsMaximum Power (Pmax): 5WVoltage at Pmax (Vmp): 17.0VCurrent at Pmax (Imp): 0.30AShort-circuit current (Isc): 0.33AOpen-circuit voltage (Voc): 21.0V
(Learn More)
BM Part #:
ACC-BLSOLAR2

Quantity
Price: 24.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2.5 Watt
  • Warranty: 5 Year Limited
Rated at 2.5 Watt (180 milli-ampere); for 12 Volt, 1.2-10Ah lead-acid batteries. Maintains all battery sizes. Waterproof, UV resistant, and weather resistant seals; weather resistant solar charger for outdoor rated at IP65. Thin film technology; works well in low-light, cloudy and overcast conditions. Designed for safety; short circuit, open circuit, overheat and over-current. Multiple battery chemistry; safely charges wet, Gel, MF and AGM batteries. Includes four (4) suction cups; easy to mount in many different locations and positions. The NOCO BLSOLAR2 Solar Battery Charger and Maintainer is a 2.5 watt ultra-low profile thin film. This panel is one of the top choices for maintaining 12 volt batteries, commonly found on motorcycles, ATVs, tractors, lawn mowers, or snowmobiles. It provides up to 180 mA (0.18 amp) charging current, and protects against accidental reverse battery drain. The BLSOLAR2 is suitble for maintaining all types of lead-acid batteries. Whether your battery is Wet, Gel, Maintenance Free, or AGM, this panel can keep your battery maintained. A common question about solar panels are how well they can handle the elements. This panel is completely waterproof, and completely safe to use outdoors. In fact, the thin film technology offers optimal performance in low-light, cloudy, and overcast conditions. What's in the box? (1) 2.5W Solar Battery Charger with 8ft. DC Cord (1) Battery Terminal Clamps (1) 12V Plug Connector (4) Suction Cups (4) Stainless Steel Screws
(Learn More)
BM Part #:
ACC-BLSOLAR5

Quantity
Price: 49.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5.0 Watt
  • Warranty: 5 Year Limited
Rated at 5.0 Watt (410 milli-ampere); for 12 Volt, 1.2-20Ah lead-acid batteries. Maintains all battery sizes. Waterproof, UV resistant, and weather resistant seals; weather resistant solar charger for outdoor rated at IP65. Thin film technology; works well in low-light, cloudy and overcast conditions. Designed for safety; short circuit, open circuit, overheat and over-current. Multiple battery chemistry; safely charges wet, Gel, MF and AGM batteries. The NOCO BLSOLAR5 Solar Battery Charger and Maintainer is a 5.0 watt ultra-low profile thin film. This panel is one of the top choices for maintaining 12 volt batteries, commonly found on motorcycles, ATVs, tractors, lawn mowers, or snowmobiles and other applications. It provides up to 410 mA (0.41 amp) charging current, and protects against accidental reverse battery drain. The BLSOLAR5 is suitble for maintaining all types of lead-acid batteries. Whether your battery is Wet, Gel, Maintenance Free, or AGM, this panel can keep your battery maintained. A common question about solar panels are how well they can handle the elements. This panel is completely waterproof, and completely safe to use outdoors. In fact, the thin film technology offers optimal performance in low-light, cloudy, and overcast conditions. What's in the box? (1) 5W Solar Battery Charger with 8ft. DC Cord (1) Battery Terminal Clamps (1) 12V Plug Connector (4) Stainless Steel Screws
(Learn More)
BM Part #:
ACC-SG-4

Quantity
Price: 39.95
  • Warranty: 5 Year Factory Direct
SunGuard is the most advanced small, economical solar charge controller on the market today.SunGuard’s technology provides:Exceptional ReliabilityPWM Battery ChargingConsistent High QualityLow CostThe SunGuard is able to match the quality and performance of the world-leading SunSaver controllers because:SunGuards are made on the same high speed, automated production linesSunGuards use the same charging circuitSunGuards use the same high quality componentsFeatures:ISO 9002 quality programsSeries design (not shunt)100% solid stateTrue 0 to 100% PWM duty cycleSetpoint accuracy to 60 mVTemperature compensationRated for 25% overloadsNo need to derateLightning protected with 1500 W transorbsSelf-consumption is 6 mAFully encapsulated in epoxy pottingABS plastic, impact-resistant caseOutdoor rated, Hypalon connecting wiresWire size #16 AWGElectrical SpecificationsRated Solar Input: 4.5AMax. Input (5 min.): 5.5ASystem Voltage: 12VMax. Solar Voltage: 30VRegulation Voltage: 14.1V
(Learn More)
BM Part #:
ACC-BSP-2-12

Quantity
Price: 39.95
  • Warranty: 5 Year Factory Direct
Our line of rugged outdoor solar panels come complete with a built-in blocking diode and a ten foot UV resistant output cable with bare wire leads. The anodized aluminum frame provides for easy mounting to mounting brackets and also offer full protection for years of continued charging.The cell strings are laminated between sheets of ethylene vinyl acetate (EVA) with stainless steel substrate.Typical Electrical CharacteristicsMaximum Power (Pmax): 2.5WVoltage at Pmax (Vmp): 17.0VCurrent at Pmax (Imp): 0.15AShort-circuit current (Isc): 0.17AOpen-circuit voltage (Voc): 21.0V
(Learn More)
BM Part #:
ACC-SS-10-12

Quantity
Price: 60.45
  • Warranty: 5 Year Factory Direct
Morningstar’s advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions.This technology provides:Proven ReliabilityPrecise Lighting ControlPWM Battery ChargingFeatures:Microcontroller digital accuracyFully automatic operationSpecial on/off/on functionsManual test capabilityLVD override protectionDetects day and night using the PV arraySuitable for all 12/24 Vdc lampsSealed/Flooded battery selectTemperature compensationParallel with a SunSaver for 40 amps solarIncludes SunSaver battery charging circuitAnodized aluminum caseWire size #10 AWG (5.2 mm)Electrical Specifications:Rated Solar Input 12 Volt, 10 AmpRated Load: 10 Amp25% Current Overload: 5 min.Sealed Battery Voltage: 14.1 VFlooded Battery Voltage: 14.1 VLoad Disconnect Voltage: 11.7 VLVD Reconnect Voltage: 12.8 V
(Learn More)
BM Part #:
ACC-SS-20-12

Quantity
Price: 89.95
  • Warranty: 5 Year Factory Direct
Morningstar’s advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions.This technology provides:Proven ReliabilityPrecise Lighting ControlPWM Battery ChargingFeatures:Microcontroller digital accuracyFully automatic operationSpecial on/off/on functionsManual test capabilityLVD override protectionDetects day and night using the PV arraySuitable for all 12/24 Vdc lampsSealed/Flooded battery selectTemperature compensationParallel with a SunSaver for 40 amps solarIncludes SunSaver battery charging circuitAnodized aluminum caseWire size #10 AWG (5.2 mm)Electrical Specifications:Rated Solar Input 12 Volt, 20 AmpRated Load: 20 Amp25% Current Overload: 5 min.Sealed Battery Voltage: 14.1 VFlooded Battery Voltage: 14.1 VLoad Disconnect Voltage: 11.7 VLVD Reconnect Voltage: 12.8 V
(Learn More)
BM Part #:
SCC015

Quantity
Price: 179.99
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15 Watts
  • Warranty: 2 Year Factory Direct
Solar Charger Controllers, Desulphators, Panels When solar panels are used to charge storage batteries (as in recreational vehicles, boats, remote monitoring and many home installations), their limited output under low sunlight conditions leads to seriously shortened battery life and performance. Trying to protect against this creates higher costs, as the typical solution is to increase the size / number of both the panels and batteries. In addition, typical solar controllers, although able to protect batteries from under/over charge, fail to optimize the charge rate capabilities of the solar panels. They also do not remove sulphate* build-up on the battery's storage plates, causing longer recharge time, boil out and shortened life. Our BatteryMINDer model SCC015 (shown on the right) is a "Smart" Pulse Width Modulated solar charge controller-desulphator. In addition to protecting batteries from over/under charge, its unique design optimizes charge rate, ensuring batteries are recharged in the shortest possible time, keeping them at full-charge indefinitely, without ever overcharging. A patented high frequency pulse circuit continually desulphates the battery's storage plates, allowing batteries to safely accept the highest possible rates of charge in the shortest time. Because of its pulse type output and hi-lo temperature compensation, model SCC015 BatteryMINDer can be used on all types and brands of solar panels and lead acid batteries including deep cycle and sealed AGM. Model SCC015 is part of a complete battery maintenance system with both the SolarGuard battery condition monitor and a high efficiency 15-watt amorphous silicon solar panel. *Sulphate is considered to be the major cause of reduced performance and early battery failure (Battery Council International [BCI] January 1998. Frequently Asked Questions Q: What do the experts say? A: Here at BatteryMart.com every product is thoroughly tested. BatteryMINDer has been tested by our in-house panel of experts who compared it with major competitors. Their conclusion? BatteryMINDer is a top pick. Q: Is it a big seller on BatteryMart.com? A: YES. We've had this model in stock for nearly 5 years and have already sold hundreds of units. Q: Can the Solar BatteryMINDer be used to charge, maintain and desulphate any size or type lead acid 12-volt battery such as sealed gel, agm, deep cycle, marine, maintenance free electrolyte? A: YES, BatteryMINDer can charge, maintain and desulphate any type size lead acid based battery, regardless of construction or brand. It is however limited in power (charge current output) by the solar panel (15 watts = 15-v @ 1.0 amps). If possible, always charge your battery(s) to full capacity using a plug-in type 120 Vac input high output charger, before connecting it to your solar maintenance charger. Q: Can BatteryMINDer be used to maintain and desulphate more than one battery at a time? A: YES, but remember the limitation of the solar panel will determine how much current output your Solar BatteryMINDer can supply to the battery. Normally, up to 4 parallel connected batteries can be maintained, if they are in good condition. See our definition of a good" battery in instructions for the Battery MINDer SCC015 solar maintenance charger-desulphator. Scientific basis for de-sulphation process / circuitry Every element known to man has a magnetic moment at a resonant frequency ie, a point at which the chemical bonds that hold the molecules together to form a crystal can be broken. Sulphation, the number one cause of early battery failure, is simply crystals of lead sulphate (PbSO4) which have formed on the lead storage plates in a lead-acid type battery. Magnified views of battery plates: New battery Sulphated plates (Note the large crystals) After dusulphation using high frequency pulses When a battery is improperly charged (over/under) or allowed to self discharge as occurs during storage/non-use, these crystals build up on the battery's storage plates preventing the battery from ever being fully charged and therefore able to deliver their full power/capacity. VDC Electronics, Inc. has created a simple method of generating the required resonant frequency (3.26 megahertz pulse) to breakdown the lead sulphate crystals, allowing the molecules to return to the battery's electrolyte. By creating a wave form with the required 3.26 HHz frequency, coupled with a very fast rise time and a high amplitude pulse, more energy is developed to breakdown sulphation than by any other method believed to exist. On February 6, 2001 this unique approach was granted a U.S. Patent Note: Not every battery is a candidate for re-conditioning due to mechanical damage, due to vibration or contamination, which has caused its cells to be shorted. If however a 12 volt battery has a resting voltage of at least 10.5V and none of the 6 cells are shorted, de-sulphation of its plates can be accomplished. Technical Specifications and Features Features Includes one lug harness Brackets included 15 watt amorphous silicon solar panel PulseMode Circuitry Auto-Float control Automatic 3-mode operation Dissolves power robbing sulphation and prevents new sulphation (caused by self-discharge). LED indicators for Charge, Polarity Reversed and Solar Power. Shuts off completely when sunlight is reduced with no drain on the batteries. Meets exact maintenance float charge rate of all major sealed, dry-type battery makers. Guarantees full charge without ever overcharging. Prevents permanent cell damage due to self-discharge. Allows battery to be stored safely at -0°F to +120°F. Supplies exact voltage and current required – never more. Temperature short circuit and polarity reversal protected. Designed/engineered in the USA. Built in strict accordance with ISO 9001 Quality Certification. 1-year money-back guarantee handled directly through VDC. General Specifications Model SCC015 Shipping Weight: 67 pounds Output 12 volts @ 1 Amps Charge Voltage 14.2 Vdc Float Voltage 13.2 Vdc Desulphation Pulse 1A @ 3.26 MHz Float Current 5 Ma – 1 Amp* 18 ft Panel to Controller Cable Solar Panel Size: 12.5"W x 36"L x 1"H 2 Year Warranty (Handled directly through VDC) * Actual current output is determined by individual battery demand. Technical Specs: (Manual 1 PDF) (Manual 2 PDF)
(Learn More)
BM Part #:
800301-001

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Watts
  • Warranty: 1 Year
Helps trickle charge 12 volt batteries For auto, marine, and RV batteries Plugs into 12 volt DC plug or directly into battery Weatherproof Package Includes: 1' Cigarette Plug 1' Clamps 4 Screw
(Learn More)
1 2 of 2 next
SearchSpring