Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Two 6 Volt Battery Box

Showing 1 - 24 of 90 items Search Results for "two 6 volt battery box"

1 2 3 of 4 next

Sort By:

BM Part #:
BOX-6V-GC-X2

Quantity
Price: 64.95
  • Dimensions: 14.75"L 10.75"W 12.00"H
Easy to Install: Fastens from the top/down for quick installation. Box accepts 1/4" fasteners (not included) Full-Flow Ventilation Molded from Linear Low-Density Polypropylene Acid, Gasoline, Oil, Salt and Chemical Resistant Impact Resistant to -40F (-40C) Battery Box Installation Instructions Meets United States Coast Guard (USCG) Code of Federal regulations 183.249 and American Boat and Yacht Council (ABYC) Recommended Practices for small crafts E-10.7 and National Fire Protection Association, Solar America Board and the National Electric Code for Codes, Standards and Suggested Practices for Photovoltaic Application Articles 480, 690-71, 72, 73.
(Learn More)
BM Part #:
BOX-6V-GC

Quantity
Price: 9.95
  • Dimensions: 10.75"L 7.25"W 12.25"H
  • Warranty: 1 Year
Quick Cable battery boxes--the QuickBox line--are made in the U.S. with unique features engineered for specific applications. The standard QuickBox line fits all batteries in the specific group sizes, including spiral cell and high performance models. With features like the QuickLock cover, mounting holes in the handles and materials tested to perform in all conditions, these are the battery boxes of choice. Features: Rugged heavy wall polyethylene construction Impervious to acid, gasoline, oil and solvents Flame retardant Heat stable -30° to +200°F (-34° to 93°C) Depending on your space requirements, use two boxes side-by-side, end-to-end or use a dual box About the BOX-174: Battery Group: 6 Volt / GC2 Color: Black Dimensions: Inside: Length: 10.75" (27.3cm) Width: 7.25" (18.4cm) Height: 12.25" (31.1cm) Outside: Length: 13.5" (34.3cm) Width: 9.25" (23.5cm) Height: 13" (33cm)
(Learn More)
BM Part #:
BLM-CHARGER

Quantity
Price: 39.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 1.25 Amps
  • Warranty: 10 Years
Open Box Special This open box special is specially priced. The item is slightly dented and has been tested to be in working condition. The 12 volt Deltran Battery Tender Plus is a 1.25 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Included is a quick connect harness for hard to reach areas.Includes one Clamp Harness and one Lug HarnessOptional cigarette plug allows you to charge & maintain your battery directly from your vehicle's lighter socket (only use if socket energized with key off)Temperature compensated to ensure optimum charge voltage according to ambient temperature.Automatically switches from full charge to float charging mode.Reverse Polarity Protection to ensure user safety.Complete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode).BTP microchip technology virtually eliminates battery destroying sulfationBuilt in 72 hour safety timer protects marginal batteries from over chargingMaintain up to 4 standard, starting batteries (of similar type - in parallel). Amperage is divided evenly among connected batteries. (NOT recommended for deep cycle batteries)Spark ProofSize: 4.88" x 3.25" x 2.88"Input Power: 115VAC @ 60HzAC power cord with a standard 3 prong plug - 6ft in lengthDC cord with connectors - 6ft total length (58" cord length)Temperature Range: -20F to 120FUL listed10 year Warranty!Battery Tender Plus's new BTP microchip technology applies the correct peak charge, then automatically maintains the battery at the perfect float voltage which virtually eliminates battery destroying sulfation. What does all this technology mean for you? A battery that is ready to go when you are! BTP microchip technology will extend the life of your battery.The new Battery Tender Plus will correctly charge and maintain any type of lead acid battery - AGM (absorbed glass mat) or sealed calcium batteries.Technical Specs:(Adobe PDF)
(Learn More)
BM Part #:
SLA-6V12-F1

Quantity
Price: 14.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 12 Ah
  • Warranty: 1 Year
Note: Manufacturers change battery specifications without notice. Please inspect your old batteries to verify the quantity needed, terminal and battery sizes. Brand New First Quality Factory DirectSealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".Long Service LifeA dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40 ºC to +60 ºC (-40 ºF to +140 ºF), and charged at temperatures ranging from -20 ºC to +50 ºC (4 ºF to +122 ºF).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.Specifications:6V 12AHLength 5.95 in.Width 1.97 in.Height 3.71 in.Terminal F1F1 terminals are .187" wide (3/16")1 Year Warranty
(Learn More)
BM Part #:
G750

Quantity
Price: 31.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 750 mA
The NOCO G750 is a smart, 5 Step, fully automatic switch-mode battery charger and maintainer. The G750 is best for small battery applications from 1.2-30Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G750 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G750']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G750']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G750']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Wicked Smart Features: 6V/12V CompatibilityCharges 6V and 12V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time What's in the box? G750 Charger Battery clamp connectors Eyelet Terminal Connectors Owner's manual and user guide (View PDF) Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 3: Bulk Continues Bulk charging process, returns 90% of battery capacity. Step 4: Absorption Brings the charge level to 100%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 5: Maintenance Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and then will discontinue the charge cycle. Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Technical Specifications: Input Voltage AC: 110-120VAC, 50-60Hz Working Voltage AC: 85-130 VAC, 50-60Hz Input Current: 300mA RMS Max Efficiency: 85% Approx. Power: 20W Max Charging Voltage: 7.2V/14.4V Charging Current: 750mA Back Current Drain: <5mA Ripple: <2% Charger Type: 5 Step, Fully Automatic, Switch-Mode Type of Batteries: 6V and 12V Lead-Acid Battery Chemistries: Wet, Gel, MF & AGM Battery Capacity: 1.2-30Ah, Maintains All Battery Sizes Housing Protection: IP60 Cooling: Natural Convection Noise Level: <50 dB Dimensions (L x W x H): 4.5 x 2.7 x 1.3 Inches Weight: 0.5 Pounds
(Learn More)
BM Part #:
G3500

Quantity
Price: 59.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 3.5 Amps
The G3500 is a smart, 8 Step, fully automatic switch-mode battery charger and maintainer. The G3500 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A versatile battery charger that provides charging modes for both large and small batteries from 1.2-120Ah, such as Cars, RVs, Boats and Trucks, as well as for Motorcycles, ATVs, Jet Skis or Snowmobiles. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G3500']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G3500']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G3500']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Wicked Smart Features: 6V/12V CompatibilityCharges 6V and 12V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time Recovery ModeRecovers deeply discharged & sulphated batteries with pulse charging Cold/AGM ModeOptimized charge mode for cold weather or AGM batteries What's in the box? G3500 Charger Battery Clamp Connectors Eyelet Terminal Connectors Owner's Manual & User Guide (View PDF) Product Registration Card Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4-5: Bulk The Bulk charging process continues using both a High Rate and Medium Rate charge and returns 80% of battery capacity, indicated by the 25%, 50% and 75% CHARGE LEDs. Step 6: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 7: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 8: Maintenance Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Technical Specifications: Input Voltage AC: 110-120VAC, 50-60Hz Working Voltage AC: 85-130 VAC, 50-60Hz Input Current: 1200mA RMS Max Efficiency: 85% Approx. Power: 60W Max Charging Voltage: 7.2V/14.4V, 7.4/14.7V (Cold/AGM) Charging Current: 3500mA (Large), 900mA (Small) Back Current Drain: <5mA Ripple: <2% Charger Type: 8 Step, Fully Automatic, Switch-Mode Type of Batteries: 6V & 12V Lead-Acid Battery Chemistries: Wet, Gel, MF & AGM Battery Capacity: 14-120Ah (Large), 1.2-14Ah (Small) Housing Protection: IP65 Cooling: Natural Convection Noise Level: <50 dB Dimensions (L x W x H): 7.7 x 2.7 x 1.9 Inches Weight: 1.1 Pounds
(Learn More)
BM Part #:
G1100

Quantity
Price: 44.95
  • Voltage: 6/12 Volt
  • Capacity (Amp Hours): 1.1 Amps
The G1100 is a smart, 7 Step, fully automatic switch-mode battery charger and maintainer. The G1100 is best for small battery applications from 2.2-40Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G1100 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G1100']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G1100']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G1100']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Wicked Smart Features: 6V/12V CompatibilityCharges 6V and 12V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time Recovery ModeRecovers deeply discharged & sulphated batteries with pulse charging Cold/AGM ModeOptimized charge mode for cold weather or AGM batteries What's in the box? G1100 Charger Battery clamp connectors Eyelet Terminal Connectors Owner's manual and user guide (View PDF) Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4: Bulk The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs. Step 5: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 6: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this Step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 7: Maintenance Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Technical Specifications: Input Voltage AC: 110-120VAC, 50-60Hz Working Voltage AC: 85-130 VAC, 50-60Hz Input Current: 600mA RMS Max Efficiency: 85% Approx. Power: 30W Max Charging Voltage: 7.2V/14.4V, 7.4/14.7V (Cold/AGM) Charging Current: 1100mA Back Current Drain: <5mA Ripple: <2% Charger Type: 7 Step, Fully Automatic, Switch-Mode Type of Batteries: 6V & 12V Lead-Acid Battery Chemistries: Wet, Gel, MF & AGM Battery Capacity: 2.2-40Ah, up to 150Ah for Maintenance Housing Protection: IP65 Cooling: Natural Convection Noise Level: <50 dB Dimensions (L x W x H): 6.1 x 2.5 x 1.6 Inches Weight: 0.8 Pounds
(Learn More)
BM Part #:
BM-MBT6N6

Motobatt MBT6N6 6V 6Ah AGM Battery Free Ground Shipping!
Quantity
Price: 48.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 6 Ah
  • Warranty: 2 Year Factory Direct
6 Volt - 6 AhSealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
EVR-522-156PK

Quantity
Price: 179.40
Energizer consumer battery in bulk packaging. Most popular long-lasting power source Very good shelf-life, up to 7 years Lower initial cost compared to Lithium and NiMH Rechargeable battery systems Suitable for use across all types of devices
(Learn More)
BM Part #:
BAT-EN6

Quantity
Price: 24.95
  • Voltage: 1.5 Volt
  • Capacity (Amp Hours): 200 Ah
This 1.5 Volt dry cell battery contains no Mercury or Cadmium. The battery is crafted specifically for high power, constant voltage, and a better response to temperature changes. These features extremely important in telecommunication applications the Cegasa Air Alkaline battery is popular in. Replacement For: Energizer EN6 ANSI / NEDA 906AC or 906 IEC LR40, R40 Also known as: Ignition Battery or Type R40 The EN6 battery has been used in a variety of applications: HAM radio equipment, radiation monitoring equipment, ignition power for manufacturing machinery, equipment control panel back-up power, military CB radios, portable testing/measuring devices. And, the application that our customers have used EN6 batteries for... Grandfather clocks! What are some advantages of Cegasa's Air Alkaline batteries? More Powerful, Long Lasting This battery is very similar in appearance some other batteries you may have seen (including the now discontinued Zinc Chloride battery we carried). However, internally they have substantial differences. Cegasa's air alkaline cells use a very small amount of cathodic active material when compared to conventional alkalines. To put it simply, this means that more electrical energy is available. The unique chemistry of the battery can be continuously regenerated by oxidizing it with the air. After removing the seal, small holes are revealed in the battery shell that allows air to flow into the battery's special support system. You can see these holes in the images above. Easy to Use, Maintenance Free When you're ready to use the battery, all you need to do to activate the battery is remove the plugs blocking the air holes Maintenance Free: Ready to use out of the box Safe to handle: No dangerous liquids to spill Solid state: Operates in any position, even if in motion Higher Shelf Life Cegasa's battery boasts a two year shelf life. There is very little capacity lost when the battery is in storage: 5% in one year and 8% in two years.
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
BM-MBT6N4

Motobatt MBT6N4 6V 4Ah AGM Battery Free Ground Shipping!
Quantity
Price: 47.95
  • Voltage: 6 Volt
  • Capacity (Amp Hours): 4 Ah
  • Warranty: 2 Year Factory Direct
6 Volt - 4 AhSealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
G26000

Quantity
Price: 284.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12V @ 26 Amps / 24V @ 13 Amps
The G26000 is a smart, 15 Step, fully automatic switch-mode battery charger and maintainer. The G26000 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A powerful battery charger with specialized charging modes for recovering severely drained batteries that will not accept a normal charge and the ability to perform an equalization charge. The G26000 comes equipped with a remote temperature probe for optimized charging performance. Suitable for most 12V and 24V battery capacities from 25-500Ah, such as Motorcycles, ATVs, UTVs, Snowmobiles, Jet Skis, Cars, RVs, Boats and Trucks. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G26000']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G26000']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G26000']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Wicked Smart Features: 12V/24V CompatibilityCharges 12V and 24V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time Recovery ModeRecovers deeply discharged & sulphated batteries with pulse charging Cold/AGM ModeOptimized charge mode for cold weather or AGM batteries 16V and 32V Boost ModeHelps recover deeply discharged or sulphated batteries for 12V & 24V 13.6V Equalization and Supply ModeCharge mode for maximizing battery capacity, reviving low voltage batteries & can act as a power supply Calcium ModeCharge mode designed for calcium batteries Silent Night ModeDisables the charger's internal fan for quiet nighttime operation What's in the box? G26000 Charger HD Battery clamp connectors HD Eyelet Terminal Connectors Owner's manual and user guide (View PDF) Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4-7: Bulk The Bulk charging process continues using Max Rate, High Rate, Medium Rate and Low Rate charges and returns 80% of battery capacity, indicated by the 25%, 50% and 75% CHARGE LEDs. Step 8: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 9: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 10: Maintenance Continuously monitors the battery voltage to determine if a Maintenance charge should be initiated. If the terminal voltage falls below 12.8V (12V) and 25.6V (24V), the charger will start the Maintenance cycle until voltage reaches 14.4V (12V) and 28.8V (24V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Step 11: 13.6V Supply The 13.6V SUPPLY mode is used for low voltage batteries, maintenance charging or as a power supply. Step 12: 13.6V Equalization The 13.6V EQUALIZATION is used to provide an equalization charge by delivering a constant voltage of 13.6V. Step 13: Silent Night The SILENT NIGHT is used to provide quiet operation by reducing the charging current to 5A (5000mA) and disabling the internal cooling fan. Step 14: 16V Boost The 16V BOOST mode is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 16.5V (17V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again. Step 15: 32V Boost The 32V BOOST is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 33V (34V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again.
(Learn More)
BM Part #:
BM-MBTX9U

Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 160 CCA
  • Capacity (Amp Hours): 10.5 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 10.5 Ah / 160 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
G7200

Quantity
Price: 99.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12V @ 7.2 Amps / 24V @ 3.6 Amps
The G7200 is a smart, 12 Step, fully automatic switch-mode battery charger and maintainer. The G7200 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries, and provides maintenance charging to increase battery life. A powerful battery charger with specialized charging modes for recovering severely drained batteries that will not accept a normal charge. Suitable for most 12V and 24V battery capacities from 14-230Ah, such as Motorcycles, ATVs, UTVs, Snowmobiles, Jet Skis, Cars, RVs, Boats and Trucks. var playedOnce = false; function onYouTubePlayerReady(playerid) { player = document.getElementById('ytvideo'); player.addEventListener('onStateChange', 'youtubeEvent'); } function youtubeEvent(state) { if (state == 1) { if (!playedOnce) { playedOnce = true; _gaq.push(['_trackEvent', 'Videos', 'Unique_Play_Per_Page', 'G7200']); } _gaq.push(['_trackEvent', 'Videos', 'Play', 'G7200']); return; } if (state == 0) { _gaq.push(['_trackEvent', 'Videos', 'Ended', 'G7200']); return; } } Powered by NOCO VosFX Processor The VosFX Processor is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process, based on organic feedback from the battery, to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. What's in the box? G7200 Charger Battery clamp connectors Eyelet Terminal Connectors Owner's manual and user guide (View PDF) Wicked Smart Features: 12V/24V CompatibilityCharges 12V and 24V batteries Auto-memoryReturns to last selected mode when restarted Fully InteractiveAutomatically adjusts itself to changing current needs Designed for SafetyReverse polarity, short circuit, open circuit, spark proof, overheat, overcurrent, and overcharge Multiple Battery ChemistrySafely chargers Wet, Gel, MF, and AGM batteries Extendable ConnectorsPlug-n-play connectors for easy accessory changes HF/HE Switch Mode DesignHigh-frequency, high-efficiency for a lightweight, compact charger Rapid Charging TechnologyCharges batteries 2X faster than traditional linear battery chargers Variable Input Compensated100% full charge even with varying A/C input voltages Abnormality ProtectionAutomatically shuts "off" if charger remains in Bulk charge mode for an extended period of time Recovery ModeRecovers deeply discharged & sulphated batteries with pulse charging Cold/AGM ModeOptimized charge mode for cold weather or AGM batteries 16V Boost ModeHelps recover deeply discharged or sulphated batteries 13.6V Supply ModeCharge mode for maximizing battery capacity, reviving low voltage batteries & can act as a power supply Charging Steps Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4-7: Bulk The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs. Step 8: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 9: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this Step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 10: Maintenance Continuously monitors the battery voltage to determine if a Maintenance charge should be initiated. If the terminal voltage falls below 12.8V (12V) and 25.6V (24V), the charger will start the Maintenance cycle until voltage reaches 14.4V (12V) and 28.8V (24V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. Step 11: 13.6V Supply The 13.6V SUPPLY mode is used for low voltage batteries, maintenance charging or as a power supply. Step 12: 16V Boost The 16V BOOST mode is used to recover battery capacity from a stratified (sulfated) battery by applying a specialized high 16.5V (17V Max) voltage to soften and melt down sulfate from the battery plates so that the material becomes usable again. Technical Specifications: Input Voltage AC: 110-120VAC, 50-60Hz Working Voltage AC: 85-130 VAC, 50-60Hz Input Current: 2000mA RMS Max Efficiency: 85% Approx. Power: 150W Max Charging Voltage: 14.4/28.8V, 14.7/29.4V (Cold/AGM), 13.6V (Supply), 16.5V (Boost) Charging Current: 7200mA (12V), 3600mA (24V), 5000mA (Supply), 1500mA (Boost) Back Current Drain: <5mA Ripple: <2% Charger Type: 12 Step, Fully Automatic, Switch-Mode Type of Batteries: 12V & 24V Lead-Acid Battery Chemistries: Wet, Gel, MF & AGM Battery Capacity: 14-230Ah (12V), 14-120Ah (24V) Housing Protection: IP65 Cooling: Natural Convection Noise Level: <50 dB Dimensions (L x W x H): 8.9 x 3.8 x 2.4 Inches Weight: 1.7 Pounds
(Learn More)
BM Part #:
BM-MBTZ7S

Quantity
Price: 68.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 100 CCA
  • Capacity (Amp Hours): 6.5 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 6.5 Ah / 100 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
BM-MBTZ10S

Quantity
Price: 79.43
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 175 CCA
  • Capacity (Amp Hours): 8.6 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 8.6 Ah / 175 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
BM-MB7U

Motobatt MB7U 12V 6.5Ah AGM Battery Free Ground Shipping!
Quantity
Price: 67.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 100 CCA
  • Capacity (Amp Hours): 6.5 Ah
  • Warranty: 2 Year Factory Direct
12 Volt - 6.5 Ah / 100 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersThe world's only premium AGM factory activated 4-terminal powersports battery. Guaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safePatented top, front and side connection terminal design provide easy multiple terminal installations, increased power flow, long terminal connection strength and durabilityHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifePatented recessed quad terminal cover design facilitates multi-terminal fitment for accessory cable fitmentNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
BM-MB16AU

Quantity
Price: 103.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 230 CCA
  • Capacity (Amp Hours): 20.5 Ah
  • Warranty: 2 Year
12 Volt - 20.5 Ah / 230 CCASealed, Maintenance Free AGM BatteryIncludes hardware:Stainless steel fastening screws with wrenchThreaded brass multi-fit terminalsSpacersGuaranteed long life and factory activated so it is ready to install out of the box. High density oxide provides maximum power-per-pound for dependable 'high cycling' long life service and lowest discharge rates.FeaturesFactory sealed, valve regulated, maintenance-free design eliminates damage from acid spills and corrosion; environmentally safeHeavy cast positive and negative full frame grids provide the highest amp hour and cranking amps and the lowest self-discharge rates for successful high voltage off-season storageLarge over the partition straps and welds increase durability, power output, and lifeNote: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.
(Learn More)
BM Part #:
YT9B-4

YT9B-4 AGM Maintenance Free Battery Free Ground Shipping!
Quantity
Price: 54.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 115 CCA
  • Capacity (Amp Hours): 8 Ah
  • Warranty: 1 Year
12 VoltsCCA: 1158 Amp Hour @20 hr rateFeatures:Sealed, Maintenance-FreeLeakproof/SpillproofShips fully charged ready to installEnvironmentally friendly, 100% recyclableVibration Resistant DesignFully Charged out of the boxNew bolts included *Picture is approximate representation of the item. Color and brand may vary. Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application.Off-Season Maintenance:We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
YTX7A-BS

Quantity
Price: 31.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 85 CCA
  • Capacity (Amp Hours): 6 Ah
  • Warranty: 1 Year
12 Volts CCA: 85 6 Amp Hour @10 hr rate Features: Sealed, Maintenance-Free Leakproof/Spillproof Ships fully charged ready to install Environmentally friendly, 100% recyclable Vibration Resistant Design Fully Charged out of the box New bolts included *Picture is an approximate representation of the item. Color and brand may vary. Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the below charger to maintain this battery when it is not in use.
(Learn More)
BM Part #:
YT12B-BS

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 160 CCA
  • Capacity (Amp Hours): 10 Ah
  • Warranty: 1 Year
12 VoltsCCA: 16010 Amp Hour @10 hr rateFeatures:Sealed, Maintenance-FreeLeakproof/SpillproofShips fully charged ready to installEnvironmentally friendly, 100% recyclableVibration Resistant DesignFully Charged out of the boxNew bolts included *Picture is approximate representation of the item. Color and brand may vary. Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off-Season Maintenance: We recommend the charger below to maintain this battery when it is not in use.
(Learn More)
BM Part #:
YT7B-BS

YT7B-BS AGM Maintenance Free Battery Free Ground Shipping!
Quantity
Price: 39.95
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 85 CCA
  • Capacity (Amp Hours): 6.5 Ah
  • Warranty: 1 Year
12 Volts CCA: 85 6.5 Amp Hour @10 hr rate Features: Sealed, Maintenance-Free Leakproof/Spillproof Ships fully charged ready to install Environmentally friendly, 100% recyclable Vibration Resistant Design Fully Charged out of the box New bolts included *Picture is approximate representation of the item. Color and brand may vary. Note: Please check dimensions and terminal configuration to ensure this is the proper battery for your application. Off Season Maintenance: We recommend the charger below to maintain this battery when not in use.
(Learn More)
BM Part #:
BLI-1267-1-3

Quantity
Price: 16.95
  • Voltage: 3.7 Volt
  • Capacity (Amp Hours): 1250 mAh
  • Warranty: 1 Year
This replacement battery is 100% compatible with the Huawei HB4F1 and all compatible models. Our batteries and accessories are made with high quality parts and are guaranteed to meet or exceed the original equipment manufacturers specifications at a reduced price. All batteries are tested for 100% Quality Control Assurance. This replacement battery includes a 1 Year Warranty to guarantee that it has no manufacturing defects. This battery is compatible with these models: 4G SYSTEMS XSB6X G0 AT&T Impulse 4G BLU Rave EMOBILE D25HW Pocket WiFi HUAWEI A100 A103 A105 A109 A113 A115 A201 A520 C8600 CHT8000 E5 E5830 E5832 E5832s E5836s E5838 E583X E585 E586 E586E E586Es E6939 ideos U8800H ideos X5 M860 MiFi E6939 P51 Pocket WiFi C01HW T5 Titan U8220 U8230 U8800 U9120 Z101 HWBAF1 i-Mo Pocket WiFi C01HW INQ Chat 3 LENOVO C101 LePhone 3G W100 LePhone W100 Lphone 3GC101 Lphone 3GW100 Lphone 3GW101 W100 W101 SOFTBANK C01HW T-MOBILE E582 Pulse walk Box mobile WLAN This battery replaces these OEM batteries: 4G SYSTEMS HB4F1 AT&T HB4F1 BLU C634104130T EMOBILE PBD25HWZ10 HUAWEI BLT005 HB4F1 HWBAF1 LENOVO B5765620003 SOFTBANK HB4F1 T-MOBILE HB4F1
(Learn More)
1 2 3 of 4 next
SearchSpring