Voltage

May Require Technician To InstallThis is a 1 cell lithium battery designed to work in Gateway ColorBook 486DX/33, 486DX/35, 486SX/25, 486SX/33, DX2/50, DX33, DX4/75 series laptop and notebook computers.Low self discharge rate gives this cell a 10 year shelf life.Extremely stable voltage and broad

Power Rate < 400W No Load Current Draw < 0.3A Input DC Voltage Range 11-15V Output Voltage Range 117 +/- 10% Output Frequency Range 60 +/- 3Hz Max Outer Temperature < 65 C Max Power Efficiency > 90% High Voltage Cut Off Level 15.5 +/- 1V Low Voltage Alarm Level 10.5 +/- 0.5V Low Voltage Cut Off Level 10... +/- 0.5V Short Protect Yes Overload Protect Yes Dimension (LxWxH) in 5.79 x 3.89 x 1.81 in Weight 1.43 lbs Input Voltage DC 12V

Battery Charger for Digital Cameras and Video Camcorders. Includes CR-V3 Li-Ion Battery (Pictured) Specification: Input Voltage: DC12~24V Output Voltage: DC4.2V or 8.4V 0.5A Charging Voltage: 3.6V / 3.7V or 7.2V / 7.4V Charging Current: 650 mAh (Max)

This charger is a 500 mili-amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.

This charger is a 500 milliamp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.

This charger is a 1 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.

This 12 Volt Parallel Hookup Harness is for parallel hookup of 2 similarly sized batteries of the same voltage. For use with a charger with a quick connect type output cable like the Battery Tender.

Anodized aluminum case provides durability & max heat dissipation Digital Led Display (Input DC Voltage or Output Wattage) Built-in Cooling Fan Overload Indicator Cordless Remote Control Included

Voltage: 3 Volt Capacity: 40 Composition: LITHIUM Dimensions: 12MM X 2.5MM Connector: 2 PIN HORIZONTAL PC MOUNT

The Universal USB Car Charger is a DC/DC Converter with USB outlet. It incorporates safety features such as short-circuit protection and automatic overload cutoff. Use to power or charge MP3 Players, Digital Cameras, Cell Phones, and PDA's. Specifications: Input Voltage: 12-13.8 Volt DC Output... Voltage: 5 Volt DC Output Current: 1000 mAh

PriorityStart! is an automatic computerized on/off “switching” system protecting battery voltage and starting power. If battery voltage drains below 11.9 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal

The 24 Volt PriorityStart! is an automatic computerized on/off "switching" system protecting battery voltage and starting power. If battery voltage drains below 23.6 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step

Fully Automatic Microprocessor controlled Voltage controlled charging Suitable for flooded or sealed lead acid LED coupled with ammeter indicate charge operation Reverse polarity protected Weak battery detection program This charger can rapidly charge a battery Made in the USA

caseWire size #10 AWG (5.2 mm)Electrical Specifications:Rated Solar Input 12 Volt, 10 AmpRated Load: 10 Amp25% Current Overload: 5 min.Sealed Battery Voltage: 14.1 VFlooded Battery Voltage: 14.1 VLoad Disconnect Voltage: 11.7 VLVD Reconnect Voltage: 12.8 V

The 2 Bank Battery Tender Charging Station contains two encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers.

caseWire size #10 AWG (5.2 mm)Electrical Specifications:Rated Solar Input 12 Volt, 20 AmpRated Load: 20 Amp25% Current Overload: 5 min.Sealed Battery Voltage: 14.1 VFlooded Battery Voltage: 14.1 VLoad Disconnect Voltage: 11.7 VLVD Reconnect Voltage: 12.8 V

PLC Battery, assembled in the USA This is 1 cell lithium battery assembly for Koyo CPU Controllers. Low self discharge rate gives this cell a 10 year shelf life. Stable voltage and broad temperature range (-30° to +75°C).

PLC Battery, assembled in the USA This is 1 cell lithium battery for Mitsubishi MELDAS robots and industrial controllers. Low self discharge rate gives this cell a 10 year shelf life. Stable voltage and broad temperature range (-60° to +85°C).

PLC Battery, assembled in the USA. This is 1 cell lithium battery for Mitsubishi MELDAS robots and industrial controllers. Low self discharge rate gives this cell a 10 year shelf life. Stable voltage and broad temperature range (-60° to +85°C).

This ER14250 1/2 AA Lithium Thionyl Chloride battery features a high and stable operating voltage, with a high minimum voltage during pulsing. The battery's discharge rate is at a low 1% after a year of storage (at +25°C). The battery has a stainless steel container and features hermetic glass... electronics, and professional electronics. Electrical Characteristics: Nominal capacity: 1.20Ah(at 1.0 mA, +25°C, 2.0 V cut off. The capacity restored by the cell varies according to current drain, temperature and cut off voltage) Rated Voltage: 3.6V Maximum recommended continuous current: 40 mA(to get 50

temperature. Power LED flashes in reverse polarity or short circuit conditions. Qualification Test: Test for shorted cells, sulfated battery and high internal resistance before charging batteries. Constant Current Mode: Charges at "Constant current" until the battery voltage reaches the "Equalization stage... " and then switches to the "Constant voltage mode". Constant Voltage Mode: Charges at "Constant Voltage" until the battery reaches 100% charge and then switches to a reduced constant voltage charge level labeled as "Float mode". Weak Battery Indicator: Red LED labeled "weak" indicates battery is weak 5 minutes after

Features DMM with Automatic Polarity Function and 3 ½ Digit LCD Display Measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm Diode, Transistor and Continuity Test with Buzzer Data-hold Function and Backlight Protection Holster Specifications DC Voltage: 200... m/2/20/200/1000V Maximum Input: 600V AC Voltage: 200/600 Maximum Input: 600V DC current: 200µ/2m/20m/200m/10A Overload Protection: 10A Resistance: 200/2k/20k/200k/2M Overrange: Yes "1" Continuity buzzer: Yes Transistor Test: Yes Diode Test: Yes Maximum Display: 1999 LCD display size: 1.8" x 0.7" Ranging Mode: Manual Data

Current models include LED light. Specially designed for Law Enforcement, Fleets, Utility, Emergency, and Security vehicles with multiple accessories. PriorityStart! is an automatic computerized on/off “switching” system protecting battery voltage and starting power. If battery voltage drains below... 11.9 volts when engine is off, it automatically disconnects the load. The battery voltage immediately recovers. TO START: just step on brake pedal, starting power is automatically reconnected. Designed to handle 1000 “starting amps”. Often multiple accessories mimic “engine run”. The Pro

The Deltran Portable Power Tender is a 2.5A/5 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Comes with EU AC Plug Unit charges at 5 Amps with supplied clamp and lug harness. To charge at 2... Temperature Range: -20F to 120F AC Input Voltage Range 100-240 VAC 50/60 Hz