Security Seals
Welcome to BatteryMart.com!Thank you for choosing us for your battery needs. Click Here >>

Walmart Marine Batteries

Showing 1 - 24 of 91 items Search Results for "walmart marine batteries"

1 2 3 of 4 next

Sort By:

BM Part #:
SLA-9A34M

Quantity
Price: 139.95
  • Cold Cranking Amps (CCA): 750 CCA
  • Capacity (Amp Hours): 55 Ah
  • Warranty: 2 Year
100% MAINTENANCE-FREE ELIMINATES NEED TO CHECK FLUID LEVELS.Electrolyte absorbed by micro-porous glass separators eliminates acid spills and terminal corrosion.Tightly "packed" construction and calcium reinforced grids provide greater resistance to shock and vibration.Faster recharge than conventional batteries allows for faster turnaround times.Sealed construction provides added protection for sophisticated electronic equipment.Easy fit and efficient design allows for easy installation in more applications.Superb dual purpose design delivers great starting and deep cycle service.Highly porous separators lowers resistance and increases power.Computer-cast power path grids assures highest quality and optimum performance.Includes handle.Flush manifold vented cover.Automotive Post and Marine Terminal750 CCAReserve Capacity: 120 Minutes
(Learn More)
BM Part #:
DEK-00149

Quantity
Price: 2.95
Clamp Type Wing Nut Terminal converts Stadard Post Battery to Marine Terminal or Other Uses Fits Positive or Negative Posts
(Learn More)
BM Part #:
MV-12-WB

Quantity
Price: 92.95
  • Voltage: 12 Volt
  • Warranty: 1 Year Factory Direct
With Marine PriorityStart! you don't have to worry. Sit and listen to the radio, run your lights, enjoy boating without experiencing the dangers associated with a dead battery. Even if you leave a light or radio on when you leave your boat at the dock, no worries! By monitoring the battery's voltage at all times when the key is in the off position, the unit senses if a drain is taking place that would deplete the battery's starting power. It shuts it down, saving your battery's voltage, and allowing you to start your boat. The result: No dead battery.You have minimized the dangers, lost time and costs associated with a dead battery. Deep discharging a battery means you have already done damage to your battery, and jump starting can cause irreparable damage to the electrical system on board. Marine PriorityStart! maximizes the battery life, your time and your dollars spent. Because there is no hard wiring the unit is transferable.Marine PriorityStart! provides:Safety, Security, Peace of Mind, SavingsMinimizes stress level, Maximize battery life, Environmentally friendlySimple 1, 2, 3 installationNo hard wiringCoast Guard CertificationWaterproof system specially designed for marine environments. Maintenance-free, universal design works on all standard or wingnut-post battery's. Handles 1,000 starting amps and exerts a clamping force in excess of 75 linear pounds. No hard wiring required. For use with fishing boats, auxiliary engines, commercial vessels, recreational boats and smaller sporting boats. UL Tested, ISO, CE, SAE, and USCG Certified. PriorityStart is an electronic cut off switch. It will not charge or maintain a battery. Have a question regarding use of this item? Contact PriorityStart directly for installation or technical support. They can be reached at (800) 780-8276
(Learn More)
BM Part #:
ACC-502

Quantity
Price: 6.95
Top layer of staple cloth cleans threaded area. Bottom layer cloth cleans the lead base.
(Learn More)
BM Part #:
PC1800-FT

Quantity
Price: 575.33
  • Voltage: 12 Volt
  • Cold Cranking Amps (CCA): 1300 CCA
  • Capacity (Amp Hours): 214 Ah
  • Warranty: 2 Year
Like an athlete that is both a sprinter and a long distance runner, the ODYSSEY Trolling Thunder/Marine Dual Purpose battery has both massive starting power and amazing deep cycling capability - up to 400 cycles at 80% depth of discharge. With twice the overall power and three times the life of conventional marine batteries, the ODYSSEY battery is ideal for trolling, starting, and for powering the many on-board electronic accessories common in today's boats and recreational vehicles.
(Learn More)
BM Part #:
027-0004-BK

Quantity
Price: 43.95
  • Warranty: 5 Year Limited Warranty
This battery connector set from Battery Tender is normally used for fresh water trolling motors. Color Black Rated at 100 Amps continuous service Stainless Steel Hardware (Internal & External) Silver Plated Copper Contacts Stainless Steel Mounting Brackets also Available 5 Year Limited Warranty Downloadable Help Documents: Install Instructions Installation Data Cutout Model
(Learn More)
BM Part #:
027-0004-W

Quantity
Price: 43.95
  • Warranty: 5 Year Limited Warranty
The last trolling motor plug you'll ever have to buy... This battery connector set from Battery Tender is normally used for salt water trolling motors. Color White Rated at 100 Amps continuous service Stainless Steel Hardware (Internal & External) American-made silver-plated, solid copper terminals for years of use and abuse Stainless Steel Mounting Brackets also Available 5 Year Limited Warranty Battery Tender's DC controller plug incorporates a vibration-proof stainless steel spiral locking mechanism which ensures a firm connection between the battery source and your DC-powered equipment. The silver-plated copper alloy terminals and high impact UV protected glass-reinforced thermoplastic housing prevents corrosion. Designed for all 12 volt through 48 volt two wire DC applications. Includes a five year limited warranty, covering material and workmanship. Perfect for: Trolling motors Electric reels Downriggers Battery chargers Downloadable Help Documents: Install Instructions Installation Data Cutout Model
(Learn More)
BM Part #:
ACC-PS-1

Dual Pro 12 Volt 15 Amp Battery Charger Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 208.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-210-A

Quantity
Price: 193.95
  • Warranty: 2 Years Directly Through Schumacher
This Dual Bank Ship 'N Shore model is the perfect answer for multiple marine capabilities. With two sets of output cords, this unit can charge 2 separate 12 volt batteries at the same time at a "true" 10 amp charge rate or a single 12 volt battery at a true 20 amp charge rate. Ignition protected, non-sparking, battery connection leads make it safe to recharge, even on board. Microprocessor Controlled, Fully Automatic, Multi-Stage Charging System with Float-Mode Monitoring -- Charges and then maintains the battery when fully charged. Resumes continuous charging when battery becomes discharged. TRUE 10-amp Charge: for a single 12-volt battery or two 12-volt batteries in a two-battery, 24-volt system. TRUE 20-amp Charge: for single 12-volt battery. Dedicated Microprocessor: for each independently controlled bank. Electrically Independent Outputs: handle 12 or 24-volt systems. Reverse Hookup Protection: helps protect charger and battery. Desulphation Mode: attempts to recover sulphated batteries. Waterproof Construction, UL Marine Listed: Do not submerse in water. AC Line Compensation: for those varying line voltages of 107 to 127 volts. Faster Charge: maintains higher charging rate than most linear chargers (Not recommended for eye-type batteries). Ignition Protected, Non-Sparking Battery Connection Leads: make it safe to recharge on board. Short Circuit Protection: non-live ring lug connectors sense battery voltage before activating for greater safety. Over Current Protection: output cords have 30-amp fuse built in. LED Indicators: easy-to-read, 4 per channel. No Switches or Buttons to Change: sense automatically for easy charging and maintaining. 6-ft. Out Cords with Fuse and Ring connectors and AC Cord: combine for a 12-ft. maximum reach. Durable Polypropylene Case and Baked Enamel, Coated Aluminum, Rust-Proof Base: for a long product life.
(Learn More)
BM Part #:
ACC-SSC-1500A-CA

Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 15/8/3 Amp
  • Warranty: 5 Year Factory Direct
This 12 Volt charger is ideal for charging deep-cycle, gel cell, AGM, and regular automotive lead-acid batteries. Formally the SSC-1500A. This charger now meets CA energy efficiency regulations. 15 Amp Fast Charge/8 Amp Fast Charge: Charger monitors battery condition and adjusts charge rate to prevent battery damage; for car, truck, marine, RV, farm equipment, AGM, gel cell, and deep-cycle batteries. 3 Amp Slow Charge: For charging small batteries and maintaining large ones; charges motorcycle, ATV, snowmobile, and lawn tractor batteries. Microprocessor Controlled: for precise monitoring and charging. Multi-Stage Automatic Charging: Includes constant current for greater efficiency and less heat. Float-Mode Monitoring: helps maintain battery. Battery Test: Diagnose battery condition and measures battery voltage. Desulphation/Restore Mode: Prolongs battery life. Slim Profile: Makes storage and hanging easy. High-Impact Case: Rust-proof and corrosion resistant. Electronic Push-Button Controls: Easy-to-feel switches for selection of Display Mode, Charge Rate, or Battery Type: choose from regular automotive (low maintenance or maintenance free), deep cycle, AGM, or gel cell batteries. Easy-To-Read Digital Display: Indicates battery charge status and test results. 50 Amp Clamps: For top and side-mounted battery posts. 6-ft. Power and Output Cords: Combine for a 12-ft reach. Retractable Handle & Self-Stored Cables: for compact storage and portability. Reverse-Hookup Protection: Checks the polarity of the connected battery and only stats charging if correctly connected. AC Power Compensation: Works even if the electric power from the AC outlet is below normal. Short Circuit Protection: For safe charging.
(Learn More)
BM Part #:
022-0181

Battery Tender 24 Volt, 20 Amp Power Pro Tournament Charger Free Ground Shipping!

BACKORDERED
AVAILABLE June, 2014
Quantity
Price: 442.95
  • Voltage: 24 Volt
  • Capacity (Amp Hours): 20 Amp
  • Warranty: 2 Year
4-step fully automatic charging ( qualification, bulk charge, absorption, float) Short Circuit Protection Reverse Polarity Protected Waterproof Vibration & Shock Resistent Charges any type of Battery Lightweight- 9 lbs.Permanent Mounting 2 Year Warranty
(Learn More)
BM Part #:
ACC-SS-1

Quantity
Price: 162.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
GEN1

Quantity
Price: 127.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amp
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Varible Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specfications Battery Banks: 1 Amps/Bank: 10 Amps Total Amps: 10 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12 VDC Efficiency: 90% Approx. Charging Volatge: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 6.0" x 5.1" x 2.5" Weight: 3.75 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
ACC-PS-2

Dual Pro 12 Volt 30 Amp Battery Charger - Two 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 287.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-PS-3

Dual Pro Three Bank Pro 12 Volt 45 Amp Battery Charger - Three 15 Amp Banks Free Ground Shipping!

BACKORDERED
AVAILABLE April 29, 2014
Quantity
Price: 386.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 45 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and Sealed Lead Acid AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
12103

Quantity
Price: 59.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 10 Amps
  • Warranty: 1 Year
For use on Flooded Batteries 12 Volt - 10 Amp fully automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. Full 3 LED Display: Indicators display the battery's condition. As a battery reaches full charge, the yellow and green lights will flash alternately. This automatic cycling of the charger prevents overcharging, as the battery reaches its full capacity. Once fully charged the charger will continue to cycle with yellow and green lights flashing alternately, keeping the battery at its peak capacity. Red Light: Indicates the charger is properly connected to 120V supply. Yellow Light: Indicates correct polarity and combined with red light indicates charger is charging. Green Light: Indicates a full charge. Green and yellow will flash alternately when battery has reached a full charge (The yellow light will flash on about every 10 seconds) Protection: The charger has electronic protection against reverse polarity and short circuits. The overload protection is provided by two fully automatic re-settable bimetallic circuit breakers. One protecting against excess current flow and the other from excess temperature rise. Charging: The charger is capable of charging all flooded lead acid batteries with ratings from 20 to 200 Ah. All functions are fully automatic and the charger constantly monitors the battery's condition. The charging sequence is determined by the condition of the battery and is fully interactive. Battery Recovery: (deep discharge pick-up) The charger is capable of fully and properly recharging any batteries discharged down to 5 Volts. Even a totally discharged battery will recover to 10 Volts in 10 to 60 minutes, when the load is removed. No risk of shock: Charger case is made from advanced engineering plastic. Due to its double insulation, a grounding pin is not required and hence the input connector has only two pins (we have an international standards approval on this model). Abort Charge: If the charging process cannot be completed, charging will abort and power will be shut off. Specs: Includes clamps, approximately 5ft in cord length OUTPUT: 12 Volt Nominal; 10 Amp DC Set Voltage (cut-off Voltage): 14.7 +/- 0.1 Volt Float Voltage (come-on Voltage): 14.3 +/- 0.1 Volt INPUT: 105 VAC - 120 VAC ; 60 Hz DIMENSIONS: 6-1/2" wide x 11" tall x 4-1/4" deep 16.5cm x 28cm x 11cm deep WEIGHT: 3 lbs.; 1.36kg 1 Year Warranty UL and CUL Approved Tech Tip For advanced users only: The processor board on the charger does contain a jumper that can be used to adjust the charging profile on the charger between Flooded, AGM, and Gel batteries. Recommended only for those comfortable with making these changes. Out of the box, this charger only will charge flooded batteries safely.
(Learn More)
BM Part #:
OEM-1206-NA

Quantity
Price: 69.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 6 Amps
  • Warranty: 1 Year
Good for any Gel battery above 20 amp hoursComes with a 6' AC power cord and 6' DC cord with alligator clips12 VOLT / 6 AMP: Microprocessor based charger for applications from charging to maintenance for small to large batteries commonly used in; On-board and Off-board applications, specially designed for electric scooter, power wheel-chairs and patient lifts among others.GENERAL SPECIFICATIONSOUTPUT: 12 volts nominal / 6 Amps N.B. Voltage Levels and charge algorithms may be preset to Customer RequirementsINPUT: Universal / IEC plug 90-245Vac, 50-60HzMECHANICAL SPECIFICATIONSDIMENSIONS: 4.25" wide x 1.75" high x 6" deep 10.63cm x 4.38cm x 15cm deepWEIGHT: 3lbs; 1.36kgFEATURES FULL 3 LED DISPLAY: 1st L.E.D. indicates power on, 2nd indicates battery charging, 3rd indicates battery is fully charged and charger is in float/maintenance mode.CONSTANT CURRENT STAGE: Charges at Constant Current until the bulk charge is done and then switches to the Constant Voltage Stage.CONSTANT VOLTAGE STAGE: Charges at Constant Voltage until the battery system is fully charged then switches to the Float Mode.FLOAT MODE: The charger maintains the battery and monitors its capacity.USER FRIENLDY FUSE SYSTEM: The design allows easy access to all fuses without disassembling the charger. The line-input fuse is integrated with the IEC universal plug and carries also with it a replacement. The output fuse is located beside the output connectors and is an easily replaceable ATC automotive fuse.SWITCHMODE TECHNOLOGY: Charger uses much less power than standard linear chargers and the design has an above 78% efficiency. Full metal (aluminum) housing reduces E.M.I. emissions drastically.
(Learn More)
BM Part #:
ACC-SS-2

Quantity
Price: 243.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 20 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-SS-3

Quantity
Price: 306.95
  • Voltage: 12/24/36 Volt
  • Capacity (Amp Hours): 30 Amps
  • Warranty: 3 Year (Handled
    Directly Through Dual Pro)
Battery Charging System Designed for Use On Land and in Fresh and Salt Water Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use. The "Green" Charger: Totally "Repairable" Not a Throw-Away Unmatched Performance, Reliability, Safety and Quality TROUBLE FREE - Just Plug It In and Forget It! Join Over 750,000 of Our Satisfied Customers! Fully Automatic and Totally Waterproof May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles... Product Features Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged construction Waterproof Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V - 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC Parts A & B interference compliant DC charge cables = 5ft. AC power cord = 3ft. Approved and meets ISO 8846 Marine standards Ignition protected (US Coast Guard 33 CFR 183.410
(Learn More)
BM Part #:
ACC-RS-2

Quantity
Price: 136.95
  • Voltage: 12/24 Volt
  • Capacity (Amp Hours): 12 Amps
  • Warranty: 2 Year Factory Direct
The Dual Pro 6 Amp Waterproof Battery Charger is an affordable, reliable, and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. It is designed for use in many types of applications including bass boats, runabouts, pontoon boats, other watercraft, automobiles, ATVs, golf carts, and other similar uses. The system delivers sophisticated capabilities and superior value to customers. Battery Charging Systems Designed for Everyday Applications Affordable, Reliable, and Safe. Trouble free - Just plug it in and forget it! Be one of the many 750,000 satisfied customers! Wide variety of applications. Universal input, 110-220VAC. May be used in many types of every applications including: Bass boats, runabouts, pontoons, other types of watercraft, automobiles, ATVs, golf carts, and more. Features Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries Designed for use in fresh and salt water Dependable, rugged construction and waterproof Independent outputs and fully automatic Battery maintenance mode Two year warranty DC charge cables = 5ft and AC power cord = 3ft Approved and meets ISO 8846 Marine standards Models available to charge 12-36V systems LED lights indicate "Each Battery's" state of charge Reverse polarity protected and no installation restrictions Float stage maintenance and independent outputs Ignition protected (US Coast Guard 33 CFR 183.410) FCC 15 Parts A and B Interference Compliant
(Learn More)
BM Part #:
GEN3

Quantity
Price: 266.95
  • Voltage: 12 - 36 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (30 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 3 -- Charges up to three (3) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 30 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-36 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 11.0" x 7.3" x 2.9" Weight: 11.60 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
GEN2

NOCO 12 Volt, 20 Amp Genius 2 Bank Battery Charger - Made in the USA Free Ground Shipping!

BACKORDERED
Available May 16, 2014
Quantity
Price: 186.95
  • Voltage: 12 - 24 Volt
  • Capacity (Amp Hours): 10 Amp / Bank (20 Amp Total)
  • Warranty: 3 Year Factory Direct
Automatically diagnose, recover, charge, and maintain your batteries. Features Advanced 8-Step Charger Energy Efficient, 90% Efficiency Rapid Charging Technology (RCT) Variable Input Compensated (VIS) Fully Interactive, MCU Controlled Charges: Wet, Gel, MF & AGM Batteries Compact Lightweight Design Fully sealed for harsh environments Made in the USA Meets ISO 8846 Marine standards and Ignition protected (US Coast Guard 33 CFR 183.410) Specifications Battery Banks: 2 -- Charges up to two (2) single 12 volt batteries Amps/Bank: 10 Amps Total Amps: 20 Amps Input Voltage: 70-130 VAC Nominal Voltage: 12-24 VDC Efficiency: 90% Approx. Charging Voltage: 14.4V Back Current Drain: ‹1Ah Ripple: -2% Cooling: Natural Convection Charger Type: 8-Step, Switch-Mode Battery Capacity: 14-230Ah Battery Types: Wet, Gel, MF, AGM Enclosure: IP68 Output Leads (Length): 6 Feet AC Cord (Length): 5 Feet Dimensions: 7.0" x 6.0" x 2.5" Weight: 5.70 Lbs Fully Interactive, MCU Controlled The NOCO Genius charger is a fully automatic and fully interactive Micro-Control-Unit (MCU), making it faster, more powerful, more reliable, and smarter than the competitive brands. What does that mean to you? The charger will adjust itself to the changing current and voltage requirements to charge and maintain your batteries. Compact Lightweight Design The high efficiency power conversion allows the charger to be light and compact. This charger is more versatile than other brands, and is easy to install and fit into tight locations. Designed for Safety Each of NOCO Genius chargers contains multiple safety features to protect against user errors. These safety features include: reverse polarity, short circuit, open circuit, over-temperature, over-charging, and spark proof battery hook-up. Energy Efficient, 90% Efficiency The NOCO Genius charger is 90% efficient. Why is that important? The higher the efficiency level, the lower the power waste. Unlike other battery chargers, which waste almost half of their rated current, the NOCO Genius charger always performs at an optimal level. 24-Hour Mode Leaving a battery in permanent maintenance charge mode reduces battery life. In fact, most battery manufacturers recommend against it. That is why this charger shuts off when the charge sequence is complete. Then turn "On" every 24 hours to ensure proper maintenance of your battery and making sure your batteries are 100% charged. Made in the USA Designed and manufactured in the USA. With a research and development facility in Arizona and manufacturing facility in Ohio, NOCO has the ability to consistently produce the highest quality and the lowest return in the industry. Stage 1 & 2 - Diagnose and Test Checks the battery voltage to make sure battery connections are good and battery is in a stable condition. Stage 3 - Soft Start Begins battery charging process with a gentle charge. Stage 4 - Bulk Charge Begins Bulk battery charging process, returns 80% of battery capacity and voltage to 14.0 volt. Stage 5 - Absorption Charge Switches to a constant current charge rate to bring your batteries close to 90% charge. Stage 6 - Taper Charge Charges at low current levels until battery has reached 95% of its capacity Stage 7 - Top-Off Charge Charger initiates top-off charge to bring the battery to 100% charge. Stage 8 - 24 Hour Shuts off, but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life.
(Learn More)
BM Part #:
12248

Quantity
Price: 146.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 2/4/8 Amps
  • Warranty: 5 Year Factory Direct
New Alternatives Available now at BatteryMart.com Don't want to pay over $100 for a desulphating charger with multiple charge rates? Now available are the two below chargers from Schauer, who have been producing quality electrical products and charging solutions since 1907. Charge Master CM6A Charger and Desulfator CM16A Charger and Desulfator $45.95 $84.95 12 Volt for Wet, Gel, & AGM 12 Volt for Wet, Gel, & AGM 2/4/6 Amp Pulse Charging 2/8/16 Amp Pulse Charging 2 Year Warranty 2 Year Warranty Includes Ring Terminals and Clips Includes Ring Terminals and Clips The BatteryMINDer automatically dissolves power-robbing sulphation crystals using safe, low voltage, high frequency U.S. Patented pulse technology This unit comes with clips and round eyelets. No cigarette adapter plug. 12-Volt 2, 4, or 8 Amp Charger-Maintainer-Desulphator-ConditionerModel 12248 is a 3-stage Constant Current - Constant voltage - Float mode charger -maintainer-desulphator (conditioner) that extends both the performance and life of all type / size/ brands of 12-Volt batteries. These include all maintenance-free, marine-RV deep cycle, Gel, AGM "dry" types, as well as "spiral wound" constructed sealed types such as Optima, Odyssey, Exide, Interstate brands. Push-button selector for AGM, Gel and Flooded (filler caps) types ensures 100% compliance with all leading battery manufacturer's specifications. FREE battery condition indicator ($11.95 retail value), with instant pushbutton LED read-out, when you register your warranty on the manufacturer's web site. Simple connection to any type 12 volt battery. Battery Condition Indicator Model 12103 Also free with every purchase: The VDC ABS-248 Temperature Sensor (a $19.95 value). Included with every package! Features:Input: 115VAC Quick disconnect harness connection allows simple changing between clips and ring terminals Safely charges 70% - 200% faster than any/all known conventional constant voltage chargers. Maximizes cycle life and performance of all three (3) types* of lead-acid storage batteries, regardless of size / type / brand. Push button selectable type and charge rates for all size / type / brands of 12- Volt batteries, including flooded (filler caps), sealed Absorb Glass Mat (AGM), Gel, Interstate, Exide, Optima branded "spiral-cell" constructed "dry" batteries. 3 Stage (constant current bulk- constant voltage absorption-pulse width modulated float) ensures 100% full charge capacity of all battery types. Full Time random sweep desulphation**.Desulphates faster and more effectively than any known charger or stand-alone desulphator-conditioner. Spark-proof, short circuit, reverse polarity and over-temperature protected. Automatically detects defective batteries and rejects them. Polarity reversal-Error indicator. Auto-reset thermal breaker (protects both battery and charger under abnormal conditions such as a shorted cell and /or excessively high ambient temperatures) Manual override for maintenance-desulphation only long term storage mode. Rejects a damaged or open cell (shorted) battery. Portable or OnBoard mountable. Built-in battery condition indicators: detect and display charge level modes, charge retention and existence of sulphation. Automatic temperature compensation with battery temperature sensor. Sensor can be used to detect and adjust charger's output voltage depending on temperature, extending battery life and performance by more than 100%***. Extra VDC Temperature Sensors are available for purchase. 1 year 100% Money back Guarantee plus 5 year "no hassle" warranty through VDC Electronics.VDC Electronics (the manufacturer) guarantees model 12248 will significantly increase your battery's life well beyond any known battery charger currently on the market. If for any reason you do not find this to be true VDC will, up to one year after date of purchase, refund 100% of your money, including any taxes or shipping costs ****.*Flooded (filler caps), maintenance-free sealed AGM and Gel.** U.S. Patented***When compared to non "at the battery" temperature compensated chargers or ambient sensing types.****Requires registration of product within 10 days of date of purchase and is non-transferable.
(Learn More)
BM Part #:
022-0157-1

Quantity
Price: 88.95
  • Voltage: 12 Volt
  • Capacity (Amp Hours): 5 Amps
  • Warranty: 2 Year
Portable or Permanent Mount lightweight waterproof, compact on board charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickled chargers. It's easy to use, fits in tight places and it's packed with power. Includes one Lug Harness Waterproof Shock & Vibration Resistant Microprocessor Circuitry, correctly charges AGM or Wet batteries. Not to be used for Gel batteries. Charges any size (capacity) lead acid battery Included is a quick connect lug harness hard to reach areas Charge/Maintain up to 4 batteries (of similar type - in parallel) Reverse Polarity Protection Temperature Compensation (Available on some models) Complete 4-step charging program (Qualification, Bulk Charge, Absorption Mode, Float Mode) Input Power: 115VAC @ 60Hz Temperature Range: -20F to 120F 6' fused output cable UL approved at 5.5 amps Replaces 022-0076-1, 022-0071-1 Clamp harness not included see related Items Below Technical Specs: (Adobe PDF)
(Learn More)
1 2 3 of 4 next
SearchSpring